/filters:strip_exif()/monoblock-abfueller-6-1-schraubverschliesser.jpg)
Bottling monobloc 12.1 with screw capper
ID: #1256878
Description
Full automatic monobloc filling unit with filler and ROPP capper Filling Valves: The plenty of times proven filling valves of the Evolution 2 series can work with gravity (drop pressure) as well as under negative pressure (light vacuum). Filling under slight negative pressure (optional) on the one hand causes a better release of the filling and on the other hand, it is helpful with slightly foaming products and prevents dripping on the filling valve with worn-out seals. The height of the bottle is adjusted by handwheel (manual) or can also be done electrical (optionally). The filling height is set through appropriate spacers which are used in the filling valves. Pneumatic lifting of the bottle plate and mechanical lowering via cam (no air consumption). The tub has a central liquid inlet and is mirror polished inside. Total discharge drain with ball valve installed on the bottom of the tank. The opening of the filling valves for sterilization (for example with steam) or for cleaning takes is achieved by stainless steel clips. Filling valves are easy to remove and can be completely disassembled easily. Optionally available are two models of cleaning adapters that are used for final cleaning. A cleaning water collection trough is installed under the filling valves or in an alternative a cleaning rim with dummy bottles which allows to collect the cleaning solution under the valves and wash the valves also in countercurrent (backwash). The liquid feed into the filler tank is controlled via sensors. The sensors will command the pneumatically operated product supply valve and pump control. Other options: hot-filling equipment, high-vacuum, or light-pressure filling. Device for foam extraction. Capper for ROPP aluminum screw caps: The capsule magazine is mounted on a vibrator base with speed adjustment. As a result of the vibrations, the aluminum screw caps run over a rail upwards and are oriented at the same time. From the tub, the capsules are inserted into the caps distribution channel and then simply taken by the bottle (in flight). When processing long caps small air piston is available (option) which pushes the capsules on the bottleneck quite down. The height adjustment of the capper is done manually via a handwheel and can optionally be done electrically. Due to the central height adjustment of the screw head is adjusted together with the capsule distributor. The capper works with a low-maintenance ROPP 4 roll capping head with no cap no roll system. In the caps channel are installed sensors that control the capsule distributor fully automatically. The machine is prepared for the installation of a capsule elevator. We differentiate between the pneumatic capper (standard) and a mechanical variant (optional). In the pneumatic version, the bottles are lifted pneumatically and pressed into the closing head. Recommended for slower running lines. Optionally, inert gas injection can be installed on caps distribution. The frame of the monobloc is made of stainless steel. All doors are equipped with safety devices in the hinge. The control of the monobloc is carried out via a central control cabinet made of stainless steel. The system is easy and clear to use and also the format change can be accomplished quickly. Thanks to the modular design and the wide range of additional options, the machine can be optimally adapted to the needs of the company. The system is supplied with a belt, belt drive, and bottle collection table. Besides, larger bottle-feeding tables are available Ø600-800-1000 mm, and bottle collecting tables Ø600-800-1000 mm with belt drive at the end of the line. Belt connections between different machines are available on request (options). Filling Monobloc in linear design with single-head ROPP capper up to max. 2800 bottles/h. Number of filling valves: 12 Maximum capacity: 1500 lt/h Maximum capacity in bottles per hour: 1700 bottles/h Capper: single head capper with fully automatic capsule sorter, distributor and 4 rolls ROPP head. Capper with pneumatic cylinder lift max. 1800b / h. (Optional mechanically available up to 2800bottles/h).
Last Updated
14 August 2026, 23:57 UTC
Store Information
More from Inderst Landhandel - Fachmarkt Hof, Haus, Garten und Haustiere
View all/filters:strip_exif()/schraubverschluss-alu-mca-28x16-silber.jpg)
Aluminium caps MCA 28×16 silver
Contact for price
Aluminium caps MCA (metal closure aluminium) 28 x 16 mm in silver colour. This ROPP (Roll-on Pilfer Proof) caps are used to close bottles with carbonated or hot beverages. You put the caps with the screw capper. When you open the bottle, the seal remains on the bottle. With PVC-Compound suitable for a horizontal bottle storage and provides against internal pressure.
/filters:strip_exif()/kaese-harfe-edelstahl-poliert-zwiebelform-o22cm.jpg)
Käse Harfe Edelstahl poliert Zwiebelform Ø22cm
Contact for price
• der maximale Durchmeser der Zwiebel beträgt 22cm • der Durchmesser des mitgelieferten Griffs beträgt 1,5cm • die Länge des mitgelieferten schraubbaren Griffs beträgt 60cm • die Länge des in den Griff eingeschraubten Steckers beträgt 92cm Stift und Griff sind über eine 1/8-Zoll-Buchse/Hülse miteinander verbunden Das Schneidewerkzeug ist vollständig aus Edelstahl AISI 304 und AISI 316L (Spiralklinge) gefertigt und elektrolytisch poliert. Die oben aufgesetzte Kappe besteht aus blauem Polyethylen in Lebensmittelqualität. Am Ende des Griffs befindet sich ein schwarzer PVC-Knopf in Lebensmittelqualität
/filters:strip_exif()/kaese-harfe-edelstahl-40x30cm.jpg)
Käse Harfe Edelstahl 40x30cm
Contact for price
Die Käseharfe wird verwendet um den Bruch zu schneiden. • Harfenbreite: 30 cm • Harfenhöhe/Drahtlänge: 40 cm • Anzahl Drähte: 10 Drähte • Länge schraubbarer Griff: 70 cm • Material Harfe: rostfreiem Edelstahl AISI 304 (elektrolytisch poliert) • Material Kappe: Polyethylen (PE), lebensmittelechter Kunststoff
Käse Harfe Edelstahl 80x30cm
Contact for price
Die Käseharfe wird verwendet um den Bruch zu schneiden. • Harfenbreite: 30 cm • Harfenhöhe/Drahtlänge: 80 cm • Anzahl Drähte: 10 Drähte • Länge schraubbarer Griff: 70 cm • Material Harfe: rostfreiem Edelstahl AISI 304 (elektrolytisch poliert) • Material Kappe: Polyethylen (PE), lebensmittelechter Kunststoff
Käse Harfe Edelstahl 60x30cm
Contact for price
Die Käseharfe wird verwendet um den Bruch zu schneiden. • Harfenbreite: 30 cm • Harfenhöhe/Drahtlänge: 60 cm • Anzahl Drähte: 10 Drähte • Länge schraubbarer Griff: 70 cm • Material Harfe: rostfreiem Edelstahl AISI 304 (elektrolytisch poliert) • Material Kappe: Polyethylen (PE), lebensmittelechter Kunststoff
/filters:strip_exif()/regenmesser-imf-60mm-12stka.jpg)
Regenmesser IMF 60mm 12St/Ka
Contact for price
Regenmesser mit 60 mm Skala. Die Skala des Regenmessers zeigt den Niederschlag in Millimetern an. 1 mm Niederschlag entspricht 1 lt pro m² .