/filters:strip_exif()/monoblock-abfueller-6--6-1-schraubverschliesser.jpg)
Bottling monobloc 12.12.1 with screw capper
ID: #1661223
Description
Full automatic monoblock filling unit with RINSER, FILLER and ROPP CAPPER: Rinser: the rinser is used when filling new glass bottle to remove particles such as dust, condensation water, small insects, etc. The utilization of a rinser gives the bottling plant additional product safety. With the appropriate options it is also possible to achieve an internal sterilization with a bacteria killing liquid. The bottle is gripped securely by the gripper at the bottleneck and then quickly turned upside down by the twist system. The treatment agent (sterile water, ozonized water, air, inert gas, aqueous cleaning solution, etc.) is then injected into the bottle via a nozzle. After an appropriate dripping time, the bottle is moved back on the conveyor. „No bottle no spray system“. If there is no bottle in the gripper the nozzle is not spaying. Optionally it is possible to install a two-step rinser system. For example, cleaning fluid and then blow out with air or inert gas. The cleaning liquid can optionally run through a recycling system. The cleaning solution is collected and pumped through a micro filter and then used again in recirculating. Filling Valves: The 1000 times proven filling valves of the E2 series can work with gravity (drop pressure) as well as under negative pressure (light vacuum). Filling under slight negative pressure (optional) on the one hand causes a better release of the filling and on the other hand it is helpful with slightly foaming products and prevents dripping on the filling valve with worn-out seals. The height of the bottle is adjusted by handwheel (manual) or can also be done electrical (optionally). The filling height is set by means of appropriate spacers which are used in the filling valves. Pneumatic lifting of the bottle plate and mechanical lowering via cam (no air consumption). The tub has a central liquid inlet and is mirror polished inside. Total discharge drain with ball valve installed on the bottom of the tank. The opening of the filling valves for sterilization (for example with steam) or for cleaning takes is achieved by stainless steel clips. Filling valves are easy to remove and can be completely disassembled easily. Optionally available are two models of cleaning adapters which are used for final cleaning. A cleaning water collection trough installed under the filling valves or in alternative a cleaning rim with dummy bottles which allows to collect the cleaning solution under the valves and wash the valves also in countercurrent (backwash). The liquid feed into the filler tank is controlled via sensors. The sensors will command the pneumatically operated product supply valve and a pump control. Other options: hot-filling equipment, high-vacuum or light-pressure filling. Device for foam extraction. Capper for ROPP aluminum screw caps The capsule magazine is mounted on a vibrator base with speed adjustment. As a result of the vibrations, the aluminum screw caps run over a rail upwards and are oriented at the same time. From the tub, the capsules are inserted into the caps distribution channel and then simply taken by the bottle (in flight). When processing long caps small air piston is available (option) which pushes the capsules on the bottleneck quite down. The height adjustment of the capper is done manually via a handwheel and can optionally be done electrically. Due to the central height adjustment of the screw head is adjusted together with the capsule distributor. The capper works with a low maintenance ROPP 4 roll capping head with no cap no roll system. In the caps channel are installed sensors which control the capsule distributor fully automatically. The machine is prepared for the installation of a capsule elevator. We differentiate between the pneumatic capper (standard) and a mechanical variant (optional). In the pneumatic version, the bottles are lifted pneumatically and pressed into the closing head. Recommended for slower running lines. The mechanical variant (optional) is suited for capacities of up to 2800 bottles/h. Here, the bottle stops under the capping head and the rolling head moves down mechanically and rolls the cap on. Optionally, an inert gas injection can be installed on caps distribution. The frame of the monobloc is made of stainless steel. All doors are equipped with safety devices in the hinge. The control of the monobloc is carried out via a central control cabinet made of stainless steel. The system is easy and clear to use and also the format change can be accomplished quickly. Thanks to the modular design and the wide range of additional options, the machine can be optimally adapted to the needs of the company. The system is prepared to be integrated into a filling line; without belt, belt drive and bottle collection table. Belt, belt drive and bottle collection table are available as options. In addition, larger bottle feeding tables are available Ø600-800-1000 mm and bottle collecting tables Ø600-800-1000 mm with belt drive at the end of the line. Belt connections between different machines are available on request. Filling Monobloc in linear design with single-head ROPP capper up to max. 2800 b/h. Rinser: 12 grippers max. 2500 b/h Filler: 12 valves max. 2200 b/h Capper: single head capper with fully automatic capsule sorter, distributor and 4 rolls ROPP head. Capper with pneumatic cylinder lift max. 1800 b/h. (Optional mechanically available up to 2800 b/h).
Last Updated
17 August 2026, 04:36 UTC
Store Information
More from Inderst Landhandel - Fachmarkt Hof, Haus, Garten und Haustiere
View all/filters:strip_exif()/gaertopf-frutty-2-ers--deckel-5lt-o185cm.jpg)
/filters:strip_exif()/marmeladentopf-el-150lt-doppelw-mit-ruehrwerk-2x6kw.jpg)
Pentolone 90lt doppia parete con agitatore 2x6kW
Contact for price
Pentolone professionale, riscaldato elettricamente, a doppia parete con bagno d`olio e agitatore installaton nel fondo della pentola. L’agitatore garantisce un alto grado di autonomia durante il processo di cottura. L’agitatore è dotato di raschiatori sul fondo e sulla parete del contenitore e può essere rimosso per la pulizia. • Acciaio inox AISI 304 • Termostato digitale regolabile dal panello di controllo • Doppia parete riempita con glicerina di alta qualità come mezzo di trasmissione del calore • Riscaldamento diretto a bagno d’olio tramite resistenze elettriche in acciaio inox • Con due maniglie isolate • Specola per vedere il livello del glicerina, raccordo per riempimento glicerina e tubo di sovrapressione di sicurezza • Con valvola 5/4“ per lo svuotamento rapido • Telaio rinforzato su 3 ruote • Versione pronta ad uso con cavo di collegamento lungo 3m e spina 16 A Dati tecnici: • Capacità: 90 lt • Profondità della vasca: 480 mm • Diametro interno: 530 mm • Alimentazione elettrica: 400 V 3-N • Potenza installata: 2×6 kW • Motoriduttore agitatore: 0,75 kW – 28 giri/min • Dimensioni: 750 x 670 x 1060 mm • Quantità di glicerina: 43 kg • Peso: ca. 65 kg
/filters:strip_exif()/marmeladentopf-el-150lt-doppelw--auf-raedern-9kw-scaled.jpg)
Cooking pot 60lt double wallet glycerine bath 3,6kW
Contact for price
Professional, electrically heated cooking kettle, double wallet with glycerine bath. • Stainless steel AISI 304, • Double shell filled with high-quality glycerine as heat transfer medium • Direct heating from oil bath via electric screw-type tubular heater made of stainless steel with thermostat, setting range 50-220°C • With 2 insulated carrying handles • Viewing glass for glycerine level, glycerine refill and safety overpressure tube • With 5/4″ drain cock for quick emptying • bottom reinforced on 3 casters • Plug-in version with 3m long connecting cable and plug 16 A Technical data: • Capacity: 60lt • Depth: 530 mm • Internal diameter: 395 mm • External diameter: 460 mm • Total height: 870 mm • Electrical connection: 230 V • Connectin load: 3,5 kW
/filters:strip_exif()/pellenc-f3x-h35-bindzange-elektrisch-57351.jpg)
PELLENC F3X H35 BINDZANGE ELEKTRISCH 57351
Contact for price
Das F3X-H35 ist das neue elektrische Bindegerät von Pellenc, konzipiert für den intensiven professionellen Einsatz in verschiedensten Anbaukulturen – vom Wein- und Obstbau bis hin zu Spalieren, Bewässerungssystemen und Jungpflanzen. Mit seiner innovativen, 35mm großen horizontalen Öffnung bietet es maximale Flexibilität für unterschiedlichste Anwendungen. Ob dicke Triebe, Querbindungen oder empfindliche Jungreben – das H35 liefert jederzeit eine präzise, schnelle und kraftvolle Bindung. • Vielseitig einsetzbar: Bindedurchmesser bis 35mm – ideal für größere Ranken, Jungpflanzen und Techniksysteme • Ergonomisch: Neue komfortable Arbeitsposition dank horizontalem Bindekopf • Leistungsstark: 30 % stärkerer Bandeinzug – zuverlässig selbst bei Beckengurt-Rollen • Ultraleicht: Nur 850g mit Akku – ausbalanciert für ermüdungsfreies Arbeiten • Schnell: Bis zu 120 Bindungen pro Minute • Ausdauernd: Bis zu 13.000 Bindungen pro Akkuladung – ein ganzer Arbeitstag ohne Nachladen • Intelligent vernetzt: NFC-Funktion zur Verbindung mit der PELLENC-App für Einstellungen, Wartungsinfos und Statistiken Im Lieferumfang enthalten sind ein Transportkoffer mit F3X H35 mit 80m-Abroller zum Aufstecken auf das Gerät, ein ALPHA LITE Akku, ein 1-Fach Ladegerät und eine Spezialschere.
/filters:strip_exif()/pellenc-f3x-h35-bindzange-elektrisch-57351.jpg)
Pellenc F3X H35 tying machine 57351
Contact for price
The F3X-H35 is Pellenc’s new electric tying machine, designed for intensive professional use in a wide variety of crops – from viticulture and fruit growing to trellises, irrigation systems, and young plants. With its innovative 35mm horizontal opening, it offers maximum flexibility for a wide range of applications. Whether thick shoots, cross ties, or delicate young vines – the H35 delivers precise, fast, and powerful tying every time. • Versatile: Binding diameter up to 35mm – ideal for larger vines, young plants, and technical systems • Ergonomic: New comfortable working position thanks to horizontal binding head • Powerful: 30% stronger binding feed – reliable even with waist belt rolls • Ultra-light: Only 850g with battery – balanced for fatigue-free working • Fast: Up to 120 ties per minute • Enduring: Up to 13,000 ties per battery charge – a whole working day without recharging • Intelligently connected: NFC function for connection to the PELLENC app for settings, maintenance information, and statistics It is supplied with a transport case with F3X H35 with 80m unwinder for attaching to the device, an ALPHA LITE battery, a 1-slot charger, and special scissors.
/filters:strip_exif()/pellenc-f3x-h35-solo-bindzange-elektrisch-57353.jpg)
PELLENC F3X H35 SOLO LEGATRICE ELETTRICA 57353
Contact for price
La F3X-H35 è la nuova legatrice elettrica di Pellenc, progettata per un uso professionale intensivo in una vasta gamma di colture, dalla viticoltura e frutticoltura ai sistemi di irrigazione, alle spalliere e alle piantine. Con la sua innovativa apertura orizzontale di 35 mm, offre la massima flessibilità per una vasta gamma di applicazioni. Che si tratti di germogli spessi, legature trasversali o giovani viti delicate, l’H35 garantisce sempre una legatura precisa, rapida e resistente. • Versatile: diametro di legatura fino a 35mm, ideale per rampicanti di grandi dimensioni, giovani piante e sistemi tecnici • Ergonomico: nuova posizione di lavoro confortevole grazie alla testa di legatura orizzontale • Potente: alimentazione del nastro più potente del 30%, affidabile anche con rotoli di cintura • Ultraleggero: solo 850g con batteria – bilanciato per lavorare senza fatica • Veloce: fino a 120 legature al minuto • Resistente: fino a 13.000 legature per carica della batteria – un’intera giornata di lavoro senza ricarica • Collegamento intelligente: funzione NFC per il collegamento con l’app PELLENC per impostazioni, informazioni sulla manutenzione e statistiche La confezione contiene: 1 x F3X H35 con porta bobina da 80m da collegare al dispositivo, 1 x caricabatterie portatile ALPHA LITE e 1 x forbici speciali.