eXact Micro 7+ Kit
ID: #587111
Description
Special order item. Please allow approximately 4 weeks for shipment. eXact® Micro 7+ Kit - Test For Total Alkalinity, Bromine, Calcium Hardness, Free Chlorine, Total Chlorine, Copper, Transmission and pH. EPA Compliant testing method for Free & Total Chlorine when used with DPD chemistry. eXact® Micro 7+ Standard Kit Part Number: 486691-K Kit Includes 25 tests of each: eXact® Strip Micro DPD-1 (Free Chlorine) 0.01 to 6.0 ppm (mg/L) eXact® Strip Micro DPD-3 (Total Chlorine) 0.01 to 6.0 ppm (mg/L) eXact® Strip Micro pH 6.2 to 8.4 eXact® Strip Micro Calcium Hardness 20 - 990 ppm (mg/L) eXact® Strip Micro Total Alkalinity 20 – 180 eXact® Strip Micro Copper 0.04 to 8.0 ppm (mg/L) Accurate, fast and easy water field testing. 7 direct read parameters: Total Alkalinity, Bromine, Calcium Hardness, Free Chlorine, Total Chlorine, Copper, Transmission and pH Patented technology USEPA Compliant meter 140 test memory (saves last 20 tests per menu) No-slip grip housing Built in cell & countdown timer Uses rapid, safe DPD delivery method No color matching Tests for 26 parameters with optional strips: Iodine, Manganese, Potassium etc. Ideal for residential, commercial, and municipal water testing, the Micro 7+ reads 9 parameters directly. The meter fits comfortably in your hand, is waterproof (IP-67) and the sampling cell is built into the meter. Instead of utilizing hard to crush tablets or messy powders, the Micro 7+ uses revolutionary eXact® Strip: the safest and most convenient delivery system for your DPD testing. All required reagents are precisely measured and impregnated on a test strip. Set the meter to the desired test, fill the sample chamber while immersing the meter in your water sample, dip an eXact® Strip EZ into the sample for 20 seconds, and then read your results. The Micro 7+ is EPA-compliant for Free and Total Chorine regulatory testing. With a 4 ml sample cell it's environmental friendly using 60% less chemicals than the ordinary 10 ml test. The meter provides accuracy you can rely on, minimum variation, and fast results (uses 20 second test method) at 0.01 resolution. Includes carrying case, foam, meter with batteries, cleaning brush, and 25 test each of DPD-1, DPD-3, pH, TA, Ca, and Copper. Specifications Unit of Meassure: Range: Resolution: Accuracy: Free Chlorine (DPD-1) & Total Chlorine (DPD-3): 0.00 to 2.39 ppm 2.4 to 6.0 ppm 0.01 0.1 0.02 0.1, or 4% pH: 6.2 to 8.4 pH 0.1 0.3 Bromine (DPD-1): 0.00 to 2.99 ppm 3.0 to 9.0 ppm 0.01 0.1 0.03 0.1, or 4% Total Alkalinity: 20 to 180 ppm 5 25 Calcium as CaCO³: 20 to 990 ppm 10 20, or 7% Copper (CU+²): 0.00 to 1.99 ppm 2.0 to 8.0 ppm 0.01 0.1 0.02 0.1, or 4% Transmission (17 other tests): 99.9 to 10.0 %T 9.99 to 0.01 %T 0.1 0.01 0.1 0.01
Price
$384.99
Last Updated
9 August 2026, 16:40 UTC
Store Information
physical store
Location
More from Tech Instrumentation
View all
9351 Pan and Vessel Clamp (Package of 10)
$1.21
Pan/Vessel Clip Cooper-Atkins Model 9351 Stainless Steel Pan/Vessel Clamp 37-2D for 1/8" Diameter Stem Thermometer. Sold in packages of 10 clips. Dimensions 1/8" diameter bi-metals Material Stainless Steel
480836 EMF Strength Meter - 3.5GHZ RF
$253.16
480386 High Frequency measurement for EMF (50MHz to 3.5GHz) The Extech 480386 RF EMF Strength Meter monitors high-frequency radiation in the 50MHz to 3.5GHz range. It's ideal for mobile phones, cell phones, base stations, locating RF hotspots, wireless network (Wi-Fi) RF detection, RF "Electrosmog" detection, and microwave leakage. This high-frequency RF meter features non-directional measurement with 3-channel (triaxial) measurement probe, Max Hold and Average functions, and manual store/recall of up to 99 data sets. In addition, there is an audible alarm with a user-selectable threshold. The meter comes complete with a 9V battery and carrying case. Features Ideal for EMF measurements of mobile/cell phones, base stations and microwave leakage Measurement optimized for 900MHz, 1800MHz and 2.7GHz Non-directional (isotropic) measurement with three-channel (triaxial) measurement probe Max Hold and Average functions Manual store/recall up to 99 sets Level exceed audible alarm with user selectable threshold Complete with 9V battery and carrying case Specifications Specifications Range Sensor Type Electric Field Frequency Range 50MHz to 3.5GHz (Measurement optimized for 900MHz, 1800MHz and 2.7GHz) Units of Measure mV/m, V/m, μA/m, mA/m, μW/m 2 , mW/m 2 , W/m 2 , μW/cm 2 , mW/cm 2 Measuring Ranges 20mV/m to 108.0V/m 53μA/m to 286.4mA/m 1μW/m 2 to 30.93W/m 2 0μW/cm 2 to 3.093mW/cm 2 Resolution 0.1mVm, 0.1mA/m, 0.1mW/m 2 , 0.001mW/cm 2 Audible Alarm Adjustable threshold with On/Off Memory Manual store/recall of 99 sets Dimensions 9.3 x 2.4 x 2.4" (237 x 60 x 60mm) Weight 7oz (200g) UPC: 707223185377 EAN: 5053252182180
445703 Extech Big Digit Hygro-Thermometer
$46.85
445703 1" Digits on super large LCD This Big Digit Hygro-Thermometer has 1 in. digits on a super large LCD. It simultaneously displays humidity from 10 to 99% and temperature from 14 to 140°F or -10 to 60°C. Accuracy is ±5%RH and ±1.8°F/±1°C. Maximum/minimum with reset function. Complete with stand, wall mounting bracket and 1 AAA battery. Features Max/Min with "reset" function Humidity: 10 to 99%RH Temp: 14 to 140°F or -10 to 60°C Accuracy: ±5%RH; ±1.8°F, ±1°C Specifications Specifications Range Humidity range 10 to 99%RH Basic RH accuracy ± 5% (25 to 80%) Temperature range 14 to 140°F (-10 to 60°C) Basic Temperature Accuracy +/-1.8F/1°C (14 to 122°F) Dimensions 4.3 x 3.9 x 0.78"(109 x 99 x 20mm) Weight 6oz (169g)
TL360W/TL100 Alligator Clip Test Leads
$5.60
TL360W All Weather Test Leads Flexible soft leads Ideal for cold months Medium alligator clips Insulated boots Specifications: TL360W Volts: 300V Amps: 10 18 Gauge Wire Length: 36" Weight: 0.26 lb.
ST400 Economy Screwdriver Tester
$0.49
Discover the compact ST400 Economy Screwdriver Tester that doubles as a pocket screwdriver with built-in voltage detection. This versatile tool clips conveniently to your shirt pocket while providing reliable AC voltage testing from 90-250V. Essential for electricians and DIY enthusiasts who need quick voltage verification without bulky equipment. Includes battery for immediate use.
CT220-51 Bimetal Pocket Thermometers
$86.13
12-Pack of Bimetal Pocket Thermometers 1" dial 5" stem with calibration sheath. 12 units packed in self merchandising display box. Temperature Range 0 ° to 220 °F Temperature Accuracy ±2 °F Housing Material Stainless Steel Dial Diameter 1" / 2.54cm Shaft Length 5" / 12.7cm Weight 0.7oz / 19.8g