TL3W Series High Accuracy Stem Thermometer
ID: #587448
Description
TL1W (Please note - Thermoprobe products are built to the order and usually require approximately 10-12 business days to ship) The ThermoProbe TL1W Series intrinsically safe thermometer is a modified field version of the successful TL1-A thermometer. It features a rugged frame for reinforcement and is designed for continuous operation, but can be easily powered off if desired. This accurate stem thermometer is intended to be used anywhere a precision glass stem thermometer or other type thermometer may be used. The ThermoProbe TL1W Series incorporates glass thermometer simplicity and reliability with the ease of a digital display. Like precision mercury thermometers, the TL1W has accuracy, repeat-ability and long-term stability. But unlike those thermometers there will never be problems with mercury separation or hazardous material cleanup. Different from most precision electronic thermometers, the "cordless" accurate stem thermometer has no wires to get in the way or break. Battery replacement is easily done through a sealed cover. Encoded calibration is unaffected by temperature, vibration or battery removal. Low battery display, and failure mode indications protect the user from false data. 4 Point NIST Traceable Calibration and a one year warranty included. * Optional lengths for the stem type thermometer are special order and normally require about 2 weeks to ship. Features KEY FEATURES: Minimum reading Maximum reading Averaging Easy °F to °C switching Backlight Sturdy frame Display arrows indicate increasing or decreasing temperature * Options are custom and require additional lead time. Specifications Display: LCD with 0.25 inch characters Trend Indicating Arrows Low Battery & Fault indication User Functions: Auto-off after 20 minutes or continuous operation Lowest Reading, Highest Reading, Average Reading Switchable in Units of °F or °C Display tenths or hundredths resolution Construction: Stainless steel temperature sensor; Standard Sensor length 8" (20cm) Standard diameter 1/4" (6.35mm) with reduced diameter tip of 3/16" (4.76mm) Sturdy Acetyl frame surrounding aluminum enclosure Electronics and display in 3.5" x 1.2" anodized Aluminum enclosure Molded Silicone seal. Highly durable display window, graphics and membrane switches. Weight: 6.5 ounces, 180 grams Temperature: Resolution 0.01 Degrees Calibrated Accuracy: ±0.1 °F from 14 to 320 °F ±0.06 °C from -10 to 160 °C NIST Traceable Report of Test Temperature Time Constant: 8 seconds in circulated water bath (63.2% response to temperature change) Electronics: Ultra Low Power Micro-controller FLASH Memory 20 bit A/D Converter Recommended Ambient Temperature Range for Best Accuracy 32 ° to 112 °F, 0 ° to 44 °C Sensor: 100 Ohm, Class A 1/3 DIN RTD Immersion depth 4", 11cm Battery: 2 AAA Duracell MX2400 Battery Life several hundred hours depending on backlight usage Battery Operating Range -4 to 130 °F, -20 to 54 °C Note: Battery may not provide adequate power if ambient temperature is below -4 °F, -20 °C or above 130 °F, 54 °C Specifications subject to change Applications Typical Applications Temperature baths, melting point tests, flash point tests, reference, thermowells, provers, temperature calibration for flow meters. Industries: Laboratory Petroleum Pipeline Pharmaceutical Food *Due to the special certification on these meters, please allow approximately 14 days to ship. Includes certificate of calibration at the following approximate points: 32, 120, 199 (200) and 300 degrees.
Price
$968.39
Last Updated
9 August 2026, 16:42 UTC
Store Information
physical store
Location
More from Tech Instrumentation
View all
9351 Pan and Vessel Clamp (Package of 10)
$1.21
Pan/Vessel Clip Cooper-Atkins Model 9351 Stainless Steel Pan/Vessel Clamp 37-2D for 1/8" Diameter Stem Thermometer. Sold in packages of 10 clips. Dimensions 1/8" diameter bi-metals Material Stainless Steel
480836 EMF Strength Meter - 3.5GHZ RF
$253.16
480386 High Frequency measurement for EMF (50MHz to 3.5GHz) The Extech 480386 RF EMF Strength Meter monitors high-frequency radiation in the 50MHz to 3.5GHz range. It's ideal for mobile phones, cell phones, base stations, locating RF hotspots, wireless network (Wi-Fi) RF detection, RF "Electrosmog" detection, and microwave leakage. This high-frequency RF meter features non-directional measurement with 3-channel (triaxial) measurement probe, Max Hold and Average functions, and manual store/recall of up to 99 data sets. In addition, there is an audible alarm with a user-selectable threshold. The meter comes complete with a 9V battery and carrying case. Features Ideal for EMF measurements of mobile/cell phones, base stations and microwave leakage Measurement optimized for 900MHz, 1800MHz and 2.7GHz Non-directional (isotropic) measurement with three-channel (triaxial) measurement probe Max Hold and Average functions Manual store/recall up to 99 sets Level exceed audible alarm with user selectable threshold Complete with 9V battery and carrying case Specifications Specifications Range Sensor Type Electric Field Frequency Range 50MHz to 3.5GHz (Measurement optimized for 900MHz, 1800MHz and 2.7GHz) Units of Measure mV/m, V/m, μA/m, mA/m, μW/m 2 , mW/m 2 , W/m 2 , μW/cm 2 , mW/cm 2 Measuring Ranges 20mV/m to 108.0V/m 53μA/m to 286.4mA/m 1μW/m 2 to 30.93W/m 2 0μW/cm 2 to 3.093mW/cm 2 Resolution 0.1mVm, 0.1mA/m, 0.1mW/m 2 , 0.001mW/cm 2 Audible Alarm Adjustable threshold with On/Off Memory Manual store/recall of 99 sets Dimensions 9.3 x 2.4 x 2.4" (237 x 60 x 60mm) Weight 7oz (200g) UPC: 707223185377 EAN: 5053252182180
445703 Extech Big Digit Hygro-Thermometer
$46.85
445703 1" Digits on super large LCD This Big Digit Hygro-Thermometer has 1 in. digits on a super large LCD. It simultaneously displays humidity from 10 to 99% and temperature from 14 to 140°F or -10 to 60°C. Accuracy is ±5%RH and ±1.8°F/±1°C. Maximum/minimum with reset function. Complete with stand, wall mounting bracket and 1 AAA battery. Features Max/Min with "reset" function Humidity: 10 to 99%RH Temp: 14 to 140°F or -10 to 60°C Accuracy: ±5%RH; ±1.8°F, ±1°C Specifications Specifications Range Humidity range 10 to 99%RH Basic RH accuracy ± 5% (25 to 80%) Temperature range 14 to 140°F (-10 to 60°C) Basic Temperature Accuracy +/-1.8F/1°C (14 to 122°F) Dimensions 4.3 x 3.9 x 0.78"(109 x 99 x 20mm) Weight 6oz (169g)
TL360W/TL100 Alligator Clip Test Leads
$5.60
TL360W All Weather Test Leads Flexible soft leads Ideal for cold months Medium alligator clips Insulated boots Specifications: TL360W Volts: 300V Amps: 10 18 Gauge Wire Length: 36" Weight: 0.26 lb.
ST400 Economy Screwdriver Tester
$0.49
Discover the compact ST400 Economy Screwdriver Tester that doubles as a pocket screwdriver with built-in voltage detection. This versatile tool clips conveniently to your shirt pocket while providing reliable AC voltage testing from 90-250V. Essential for electricians and DIY enthusiasts who need quick voltage verification without bulky equipment. Includes battery for immediate use.
CT220-51 Bimetal Pocket Thermometers
$86.13
12-Pack of Bimetal Pocket Thermometers 1" dial 5" stem with calibration sheath. 12 units packed in self merchandising display box. Temperature Range 0 ° to 220 °F Temperature Accuracy ±2 °F Housing Material Stainless Steel Dial Diameter 1" / 2.54cm Shaft Length 5" / 12.7cm Weight 0.7oz / 19.8g