Martha by Martha Stewart Interior Paint, Eurolux Interior Matte

$32.00

[vc_row type=”in_container” full_screen_row_position=”middle” column_margin=”default” column_direction=”default” column_direction_tablet=”default” column_direction_phone=”default” scene_position=”center” text_color=”dark” text_align=”left” row_border_radius=”none” row_border_radius_applies=”bg” overflow=”visible” overlay_strength=”0.3″ gradient_direction=”left_to_right” shape_divider_position=”bottom” bg_image_animation=”none”][vc_column column_padding=”no-extra-padding” column_padding_tablet=”inherit” column_padding_phone=”inherit” column_padding_position=”all” column_element_direction_desktop=”default” column_element_spacing=”default” desktop_text_alignment=”default” tablet_text_alignment=”default” phone_text_alignment=”default” background_color_opacity=”1″ background_hover_color_opacity=”1″ column_backdrop_filter=”none” column_shadow=”none” column_border_radius=”none” column_link_target=”_self” column_position=”default” gradient_direction=”left_to_right” overlay_strength=”0.3″ width=”1/1″ tablet_width_inherit=”default” animation_type=”default” bg_image_animation=”none” border_type=”simple” column_border_width=”none” column_border_style=”solid”][vc_column_text] DESCRIPTION Eurolux Interior flat is a low-odor, high performance, fast drying waterborne finish suitable for all properly prepared interior surfaces. Eurolux may be applied over sound existing latex or oil finishes without priming, although a better appearance and enhanced durability will result if the surface is first primed with the appropriate FPE Primer. Eurolux is extremely easy to work with as it dries quickly and is completely free of odor. This remarkable paint is washable and maintainable which makes it ideal for the active lifestyle. A Eurolux Interior wall application can normally be expected to yield ten to fifteen years of beauty, pleasure and service. IMPORTANT NOTE Fine Paints of Europe sells paint systems. We do not sell individual products for use with primers from other manufacturers. Please make certain that you are using the correct Fine Paints of Europe primer specified for your coating. Coverage rates with Fine Paints of Europe are dramatically better than with domestic coatings when used with one of our “high build- high tooth” primers. Never apply a Fine Paints of Europe paint to a surface which has been primed with a sealer such as Shellac, Bin™ or Kilz™. These are fine products when used for their intended purpose but they do not provide adequate friction for great adhesion with our coatings. APPLICATION Eurolux Flat flows easily, spreads quickly, and dries in one hour. Do not apply at temperatures below 40˚F or above 80˚F, or when relative humidity exceeds 80%. Surfaces must be dry, clean and free from grease. New walls should be primed with Eurolux Primer/Undercoat before receiving Eurolux Flat topcoats. Eurolux Flat is normally rolled in a two-coat application. For both aesthetic and financial reasons, we recommend that you roll this finish as far as it will go before going back to the pan to reload your roller. Please note: Fine Paints of Europe recognizes spray application as an excellent method to apply our coatings, however we do not consult on the specifications nor the equipment needed to do so. New walls: Clean and Sand. If required, fill holes and cracks. Apply one coat Eurolux Interior Acrylic Undercoat. Finish with two coats of Eurolux Flat. For optimal appearance, pole-sand Primer and first coat of Eurolux glass-smooth with 320 paper and remove all dust before applying final coat. Previously painted walls: Clean and sand. Remove all loose and flaking material. Spot prime exposed substrates with Eurolux Primer/Undercoat or reprime entire surface. Finish with two coats of Eurolux Flat. For optimal appearance, pole-sand Primer and first coat of Eurolux glass-smooth with 320 paper and remove all dust before applying final coat. Metal, plastic and wood surfaces: Prepare with the appropriate FPE Primer. Refer to primers in directory. SPECIFICATIONS Features: Fast-drying, non-yellowing, exceptional resistance to water, solvents and detergents. Offers high resistance against impact damage and burnishing. Excellent adhesion over existing sound finishes which have been lightly sanded. Application: 3/8” nap roller, Omega Orel brush or synthetic domestic brush. Clean-Up: Clean tools immediately after use with hot water and detergent. Drying: Eurolux Flat normally dries in 1 hour (at 68?F/65% humidity) and can be recoated in approximately 6 hours. Coverage : 2.5 liter Eurogallon™ = 325 sq. ft. | 1 liter = 130 sq. ft. TECHNICAL SPECIFICATIONS VOC: 35 [/vc_column_text][/vc_column][/vc_row][vc_row type=”in_container” full_screen_row_position=”middle” column_margin=”default” column_direction=”default” column_direction_tablet=”default” column_direction_phone=”default” scene_position=”center” text_color=”dark” text_align=”left” row_border_radius=”none” row_border_radius_applies=”bg” overflow=”visible” overlay_strength=”0.3″ gradient_direction=”left_to_right” shape_divider_position=”bottom” bg_image_animation=”none”][vc_column column_padding=”no-extra-padding” column_padding_tablet=”inherit” column_padding_phone=”inherit” column_padding_position=”all” column_element_direction_desktop=”default” column_element_spacing=”default” desktop_text_alignment=”default” tablet_text_alignment=”default” phone_text_alignment=”default” background_color_opacity=”1″ background_hover_color_opacity=”1″ column_backdrop_filter=”none” column_shadow=”none” column_border_radius=”none” column_link_target=”_self” column_position=”default” gradient_direction=”left_to_right” overlay_strength=”0.3″ width=”1/1″ tablet_width_inherit=”default” animation_type=”default” bg_image_animation=”none” border_type=”simple” column_border_width=”none” column_border_style=”solid”][vc_column_text] TECHNICAL DATA SHEET [/vc_column_text][vc_column_text] MATERIAL SAFETY DATA SHEET PDFs [/vc_column_text][vc_column_text css=”” text_direction=”default”] Eurolux Flat Transparent – FOR U.S. ONLY Eurolux Flat White – FOR U.S. ONLY WATERBORNE COLORANTS – FOR U.S. ONLY: Colorant AQ 600 White USA Colorant AQ 610 Organic Yellow USA Colorant AQ 620 Organic Orange USA Colorant AQ 630 Organic Red USA Colorant AQ 644 Organic Violet USA Colorant AQ 641 Blue Violet USA Colorant AQ 650 Phtalic Blue USA Colorant AQ 660 Phtalic Green USA Colorant AQ 661 Oxide Green USA Colorant AQ 670 Oxide Yellow USA Colorant AQ 688 Oxide Red USA Colorant AQ 700 Black USA INDEPENDENT LAB REPORT: Independent Lab Reports From Marschall Labs [/vc_column_text][/vc_column][/vc_row]

$75.00

[vc_row type=”in_container” full_screen_row_position=”middle” column_margin=”default” column_direction=”default” column_direction_tablet=”default” column_direction_phone=”default” scene_position=”center” text_color=”dark” text_align=”left” row_border_radius=”none” row_border_radius_applies=”bg” overflow=”visible” overlay_strength=”0.3″ gradient_direction=”left_to_right” shape_divider_position=”bottom” bg_image_animation=”none”][vc_column column_padding=”no-extra-padding” column_padding_tablet=”inherit” column_padding_phone=”inherit” column_padding_position=”all” column_element_direction_desktop=”default” column_element_spacing=”default” desktop_text_alignment=”default” tablet_text_alignment=”default” phone_text_alignment=”default” background_color_opacity=”1″ background_hover_color_opacity=”1″ column_backdrop_filter=”none” column_shadow=”none” column_border_radius=”none” column_link_target=”_self” column_position=”default” gradient_direction=”left_to_right” overlay_strength=”0.3″ width=”1/1″ tablet_width_inherit=”default” animation_type=”default” bg_image_animation=”none” border_type=”simple” column_border_width=”none” column_border_style=”solid”][vc_column_text] DESCRIPTION Eurolux Interior matte is an odorless, high performance, fast drying waterborne finish suitable for all properly prepared interior surfaces. Eurolux may be applied over sound existing latex or oil finishes without priming, although a better appearance and enhanced durability will result if the surface is first primed with the appropriate FPE Primer. Eurolux Matte White is a non-yellowing coating and recommended for use in those areas of the home in which previous alkyd finishes have yellowed as the result of insufficient sunlight. Eurolux is extremely easy to work with as it dries quickly and is completely free of odor. The VOC of Eurolux Matte is the lowest VOC of any high-quality, waterborne matte finish in the world. This remarkable paint is as scrubbable as oil enamel, which makes it ideal for the active lifestyle. A Eurolux Interior wall application can normally be expected to yield ten to fifteen years of beauty, pleasure and service. IMPORTANT NOTE Fine Paints of Europe sells paint systems. We do not sell individual products for use with primers from other manufacturers. Please make certain that you are using the correct Fine Paints of Europe primer specified for your coating. Coverage rates with Fine Paints of Europe are dramatically better than with domestic coatings when used with one of our “high build- high tooth” primers. Never apply a Fine Paints of Europe paint to a surface which has been primed with a sealer such as Shellac, Bin™ or Kilz™. These are fine products when used for their intended purpose but they do not provide adequate friction for great adhesion with our coatings. APPLICATION Eurolux Matte flows easily, spreads quickly, and dries in one hour. Do not apply at temperatures below 40˚F or above 80˚F, or when relative humidity exceeds 80%. Surfaces must be dry, clean and free from grease. New walls should be primed with Eurolux Primer/Undercoat before receiving Eurolux Matte topcoats. Eurolux Matte is normally rolled in a two-coat application. For both aesthetic and financial reasons, we recommend that you roll this finish as far as it will go before going back to the pan to reload your roller. Please note: Fine Paints of Europe recognizes spray application as an excellent method to apply our coatings, however we do not consult on the specifications nor the equipment needed to do so. New walls: Clean and Sand. If required, fill holes and cracks. Apply one coat Eurolux Interior Acrylic Undercoat. Finish with two coats of Eurolux Matte. For optimal appearance, pole-sand Primer and first coat of Eurolux glass-smooth with 220 paper and remove all dust before applying final coat. Previously painted walls: Clean and sand. Remove all loose and flaking material. Spot prime exposed substrates with Eurolux Primer/Undercoat or reprime entire surface. Finish with two coats of Eurolux Matte. For optimal appearance, pole-sand Primer and first coat of Eurolux glass-smooth with 220 paper and remove all dust before applying final coat. Metal, plastic and wood surfaces: Prepare with the appropriate FPE Primer. Refer to primers in directory. SPECIFICATIONS Features: Fast-drying, non-yellowing, exceptional resistance to water, solvents and detergents. Offers high resistance against impact damage and burnishing. Excellent adhesion over existing sound finishes which have been lightly sanded. Application: 3/8” nap roller, Omega Orel brush or synthetic domestic brush. Clean-Up: Clean tools immediately after use with hot water and detergent. Drying: Eurolux Matte normally dries in 1 hour (at 68?F/65% humidity) at which point it may be recoated. Coverage: 2.5 liter Eurogallon™ = 400 sq. ft. | 1 liter = 160 sq. ft. TECHNICAL SPECIFICATIONS Binder: Acrylic copolymers Pigments: Titanium Dioxide, mineral and organic color pigments Vehicle: Water Thinner/Clean-up: Water/Hot Water& Detergent Specific Gravity [g/cm3]: 1.29 (White) Solids contents (white): by weight: 52% by volume: 39% Viscosity: 118-123 KU Specular gloss (60?): 3-5 GU VOC: 50 [/vc_column_text][/vc_column][/vc_row][vc_row type=”in_container” full_screen_row_position=”middle” column_margin=”default” column_direction=”default” column_direction_tablet=”default” column_direction_phone=”default” scene_position=”center” text_color=”dark” text_align=”left” row_border_radius=”none” row_border_radius_applies=”bg” overflow=”visible” overlay_strength=”0.3″ gradient_direction=”left_to_right” shape_divider_position=”bottom” bg_image_animation=”none”][vc_column column_padding=”no-extra-padding” column_padding_tablet=”inherit” column_padding_phone=”inherit” column_padding_position=”all” column_element_direction_desktop=”default” column_element_spacing=”default” desktop_text_alignment=”default” tablet_text_alignment=”default” phone_text_alignment=”default” background_color_opacity=”1″ background_hover_color_opacity=”1″ column_backdrop_filter=”none” column_shadow=”none” column_border_radius=”none” column_link_target=”_self” column_position=”default” gradient_direction=”left_to_right” overlay_strength=”0.3″ width=”1/1″ tablet_width_inherit=”default” animation_type=”default” bg_image_animation=”none” border_type=”simple” column_border_width=”none” column_border_style=”solid”][vc_column_text] TECHNICAL DATA SHEET [/vc_column_text][vc_column_text] MATERIAL SAFETY DATA SHEET PDFs [/vc_column_text][vc_column_text] Flame Spread Test – FOR U.S. ONLY Eurolux Matte Base Transparent – FOR U.S. ONLY Eurolux Matte Base White – FOR U.S. ONLY Eurolux Matte Colors – FOR U.S. ONLY WATERBORNE COLORANTS – FOR U.S. ONLY: Colorant AQ 600 White USA Colorant AQ 610 Organic Yellow USA Colorant AQ 620 Organic Orange USA Colorant AQ 630 Organic Red USA Colorant AQ 644 Organic Violet USA Colorant AQ 641 Blue Violet USA Colorant AQ 650 Phtalic Blue USA Colorant AQ 660 Phtalic Green USA Colorant AQ 661 Oxide Green USA Colorant AQ 670 Oxide Yellow USA Colorant AQ 688 Oxide Red USA Colorant AQ 700 Black USA INDEPDENDENT LAB REPORTS Independent Lab Reports from Marschall Labs. [/vc_column_text][/vc_column][/vc_row]

$75.00

[vc_row type=”in_container” full_screen_row_position=”middle” column_margin=”default” column_direction=”default” column_direction_tablet=”default” column_direction_phone=”default” scene_position=”center” text_color=”dark” text_align=”left” row_border_radius=”none” row_border_radius_applies=”bg” overflow=”visible” overlay_strength=”0.3″ gradient_direction=”left_to_right” shape_divider_position=”bottom” bg_image_animation=”none”][vc_column column_padding=”no-extra-padding” column_padding_tablet=”inherit” column_padding_phone=”inherit” column_padding_position=”all” column_element_direction_desktop=”default” column_element_spacing=”default” desktop_text_alignment=”default” tablet_text_alignment=”default” phone_text_alignment=”default” background_color_opacity=”1″ background_hover_color_opacity=”1″ column_backdrop_filter=”none” column_shadow=”none” column_border_radius=”none” column_link_target=”_self” column_position=”default” gradient_direction=”left_to_right” overlay_strength=”0.3″ width=”1/1″ tablet_width_inherit=”default” animation_type=”default” bg_image_animation=”none” border_type=”simple” column_border_width=”none” column_border_style=”solid”][vc_column_text]EUROLUX Interior satin is an odorless, high performance waterborne finish suitable for all properly prepared interior surfaces. Eurolux may be applied over sound existing latex or oil finishes without priming, although better appearance and enhanced durability will result if the surface is first primed with the appropriate FPE Primer. Eurolux Satin White is a non-yellowing coating and recommended for use in those areas of the home in which previous alkyd has yellowed as the result of insufficient sunlight. Eurolux is extremely easy to work with as it dries quickly and is completely free of odor. The VOC of Eurolux Satin is the lowest VOC of any high-quality, waterborne satin finish in the world. This remarkable paint is as scrubbable as oil enamel, which makes it ideal for the active lifestyle. A Eurolux Interior Satin application can normally be expected to yield ten to fifteen years of beauty, pleasure and service. IMPORTANT NOTE Fine Paints of Europe sells paint systems. We do not sell individual products for use with primers from other manufacturers. Please make certain that you are using the correct Fine Paints of Europe primer specified for your coating. Coverage rates with Fine Paints of Europe are dramatically better than with domestic coatings when used with one of our “high build- high tooth” primers. Never apply a Fine Paints of Europe paint to a surface which has been primed with a sealer such as Shellac, Bin™ or Kilz™. These are fine products when used for their intended purpose but they do not provide adequate friction for great adhesion with our coatings. APPLICATION Eurolux flows easily and spreads quickly, but do not overwork with brush or roller. Do not apply at temperatures below 40˚F or above 80˚F, or when relative humidity exceeds 80%. Surfaces must be dry, clean and free from grease. New wood should be primed with ECO Primer/Undercoat. Walls and ceilings should be primed with Eurolux Primer before receiving EUROLUX Satin topcoats. EUROLUX Satin is normally rolled or brushed in a two-coat application. For both aesthetic and financial reasons, we recommend that you roll this finish as far as it will go before going back to the pan to reload your roller. Please note: Fine Paints of Europe recognizes spray application as an excellent method to apply our coatings, however we do not consult on the specifications nor the equipment needed to do so. New walls and woodwork: Clean and sand. If required, fill holes and cracks. Apply one coat appropriate primer. Finish with two coats of EUROLUX Satin. For optimal appearance, pole-sand Primer and first coat of EUROLUX glass-smooth with 220 paper and remove all dust before applying final coat. Previously painted walls and woodwork: Clean and sand. Remove all loose and flaking material. Spot prime exposed substrate with EUROLUX Primer/Undercoat or reprime entire surface. Finish with two coats of EUROLUX Satin. For optimal appearance, pole-sand Primer and first coat of EUROLUX glass-smooth with 220 paper and remove all dust before applying final coat. Metal and plastic surfaces: Prepare with the appropriate FPE Primer. Refer to primers in directory. SPECIFICATIONS Features: Fast-drying, non-yellowing exceptional resistance to water, solvents and detergents. Offers high resistance against impact damage and burnishing. Excellent adhesion over existing sound finishes which have been lightly sanded. Application: 3/8” nap roller, Omega Orel brush or synthetic domestic brush. Clean-Up: Clean tools immediately after use with hot water and detergent. Drying: Dust free in approximately 1 hour (68?/65% humidity); can normally be recoated after 2 hours. Coverage: 2.5 liter Eurogallon™ = 335 sq.ft. | 1 liter = 134 sq.ft. TECHNICAL SPECIFICATIONS Binder: Acrylic copolymers Pigments: Titanium Dioxide, mineral and organic color pigments Vehicle: Water Thinner/Clean-up: Water/Hot Water& Detergent Specific Gravity [g/cm3]: 1.25 (White) Solids contents (white): by weight: 55% by volume: 44% Viscosity: 110-115 KU Specular gloss (60?): 40/50 (White) VOC: 50 [/vc_column_text][/vc_column][/vc_row][vc_row type=”in_container” full_screen_row_position=”middle” column_margin=”default” column_direction=”default” column_direction_tablet=”default” column_direction_phone=”default” scene_position=”center” text_color=”dark” text_align=”left” row_border_radius=”none” row_border_radius_applies=”bg” overflow=”visible” overlay_strength=”0.3″ gradient_direction=”left_to_right” shape_divider_position=”bottom” bg_image_animation=”none” shape_type=””][vc_column column_padding=”no-extra-padding” column_padding_tablet=”inherit” column_padding_phone=”inherit” column_padding_position=”all” column_element_direction_desktop=”default” column_element_spacing=”default” desktop_text_alignment=”default” tablet_text_alignment=”default” phone_text_alignment=”default” background_color_opacity=”1″ background_hover_color_opacity=”1″ column_backdrop_filter=”none” column_shadow=”none” column_border_radius=”none” column_link_target=”_self” column_position=”default” gradient_direction=”left_to_right” overlay_strength=”0.3″ width=”1/1″ tablet_width_inherit=”default” animation_type=”default” bg_image_animation=”none” border_type=”simple” column_border_width=”none” column_border_style=”solid”][vc_column_text css=”” text_direction=”default”] TECHNICAL DATA SHEET [/vc_column_text][vc_column_text] MATERIAL SAFETY DATA SHEET PDFs [/vc_column_text][vc_column_text] Flame Spread Test – FOR U.S. ONLY Eurolux Satin Base Transparent – FOR U.S. ONLY Eurolux Satin Base White – FOR U.S. ONLY Eurolux Satin Colors – FOR U.S. ONLY WATERBORNE COLORANTS – FOR U.S. ONLY: Colorant AQ 600 White USA Colorant AQ 610 Organic Yellow USA Colorant AQ 620 Organic Orange USA Colorant AQ 630 Organic Red USA Colorant AQ 644 Organic Violet USA Colorant AQ 641 Blue Violet USA Colorant AQ 650 Phtalic Blue USA Colorant AQ 660 Phtalic Green USA Colorant AQ 661 Oxide Green USA Colorant AQ 670 Oxide Yellow USA Colorant AQ 688 Oxide Red USA Colorant AQ 700 Black USA [/vc_column_text][/vc_column][/vc_row]

$65.00

[vc_row type=”in_container” full_screen_row_position=”middle” column_margin=”default” column_direction=”default” column_direction_tablet=”default” column_direction_phone=”default” scene_position=”center” text_color=”dark” text_align=”left” row_border_radius=”none” row_border_radius_applies=”bg” overflow=”visible” overlay_strength=”0.3″ gradient_direction=”left_to_right” shape_divider_position=”bottom” bg_image_animation=”none”][vc_column column_padding=”no-extra-padding” column_padding_tablet=”inherit” column_padding_phone=”inherit” column_padding_position=”all” column_element_direction_desktop=”default” column_element_spacing=”default” desktop_text_alignment=”default” tablet_text_alignment=”default” phone_text_alignment=”default” background_color_opacity=”1″ background_hover_color_opacity=”1″ column_backdrop_filter=”none” column_shadow=”none” column_border_radius=”none” column_link_target=”_self” column_position=”default” gradient_direction=”left_to_right” overlay_strength=”0.3″ width=”1/1″ tablet_width_inherit=”default” animation_type=”default” bg_image_animation=”none” border_type=”simple” column_border_width=”none” column_border_style=”solid”][vc_column_text css=”” text_direction=”default”] DESCRIPTION HOLLANDLAC Brilliant 98 is a high performance, marine quality enamel, unequalled in its ability to provide maximum protection and depth of color. Now with an even higher sheen, HOLLANDLAC Brilliant 98 Gloss Enamel possesses a mirror-like luminescence which may be used subtly or dramatically to create focus, space and light. The densely pigmented formulation of HOLLANDLAC Brilliant 98 provides superior coverage and hiding power. High concentrations of costly, color-fast pigments result in colors that resist fading. HOLLANDLAC Brilliant 98 White is virtually non-yellowing. However, even the highest quality white oil finishes will yellow in the constant absence of ultraviolet light; i.e., inside of a closet or in a room with little direct sunshine. HOLLANDLAC Brilliant 98’s unique self-leveling and filling properties result in a finish that dries to a beautiful, durable, porcelain-like surface whether applied by brush or spray. Although all paints perform best when applied over a FPE Oil Primer/Undercoat, HOLLANDLAC Brilliant 98 does not require primer when applied over clean, previously painted oil finishes in good condition. Surfaces previously painted with waterborne paint should be lightly sanded and primed with FPE Oil Primer/Undercoat before receiving a HOLLANDLAC finish. IMPORTANT NOTE Fine Paints of Europe sells paint systems. We do not sell individual products for use with primers from other manufacturers. Please make certain that you are using the correct Fine Paints of Europe primer specified for your coating. Coverage rates with Fine Paints of Europe are dramatically better than with domestic coatings when used with one of our “high build- high tooth” primers. Never apply a Fine Paints of Europe paint to a surface which has been primed with a sealer such as Shellac, Bin™ or Kilz™. These are fine products when used for their intended purpose but they do not provide adequate friction for great adhesion with our coatings. SURFACE PREPARATION Surfaces to be painted should be dry, free of dust, chalk, grease, rust and all foreign material which would affect adhesion. Dust and Chalk must be removed by scrubbing with mild, powdered detergent and warm water and rinsed with fresh water. NEVER prepare surfaces by washing with a petroleum-based liquid soap, which can affect adhesion. Grease and wax should be removed with lacquer thinner. Surfaces such as kitchen cabinets or furniture that may have been waxed with a silicon-based product, or stained, varnished or oiled should be treated with a deglossing agent such as Wil-Bond before priming with FPE Oil Primer/Undercoat. When mildew is encountered, it must be removed thoroughly by washing with a mild bleach and TSP solution. It is imperative that all bleach residue be removed by rinsing with water. When painting metal surfaces, all corrosion and rust must be removed; prime with the appropriate FPE metal primer. When painting wooden surfaces, knots must be sealed with shellac to prevent bleeding before priming. Glossy surfaces must be dulled by a light hand sanding or a dulling agent (liquid sandpaper). TIP: KIDDIE POOLS FOR ADULTS One of the few disadvantages of working with great brilliant enamels like Hollandlac and ECO is that pigments in both of these coatings are extremely finely ground, very much like automobile paints and therefore these paints tend to reveal airborne contamination (the type of dust particles that float in the air of even the cleanest homes) to a much greater degree than coarsely ground, lower quality coatings. Interesting to discover a marketing advantage offered by low quality coatings which is not yet being extolled by the big boxes! When painting furniture or cabinet components we recommend that the work be done in a garage or basement with a “wet floor”. The floor should be wet down with mop and bucket at least 24 hours prior to application of paint and kept wet throughout the process in order to serve as a magnet to airborne dust. Where it is not possible to move work to areas suitable for wet floor treatment, many of our best professional contractors utilize inexpensive “kiddie pools” in which they place a half inch of water at least a day or two before beginning paint application. The use of a fan during this air-cleansing period is recommended as it is the circulation of air over water which effectively cleanses the air. The fan and heat/air conditioning system should be shut off immediately before beginning application of coatings and kept off for two hours after completion of paint application in order to prevent air movement before the paint sets up. (Exhaust fans required when working with solventborne coatings should not be shut off.) APPLICATION Tools: Use a first quality, clean, natural bristle brush. We recommend the following brushes for this finish: Omega Small Flats (S57’s), or Omega Round Sash (S203’s). NEVER use a roller to apply this finish to high profile areas as a slight stipple will be evident. Please note: Fine Paints of Europe recognizes spray application as an excellent method to apply our coatings, however we do not consult on the specifications nor the equipment needed to do so. Unpainted surfaces and those previously painted with waterborne finishes: After surface preparation, apply one coat appropriate FPE Primer/Undercoat, use FPE or ECO Primer for wood, Primer AC for ferrous metal, Key Primer for non-ferrous metals and plastics. Primer coat should be sanded with 220 grit paper and tacked clean before receiving two thin, even coats of HOLLANDLAC Brilliant 98. Allow each coat to dry overnight. For added durability, apply two primer coats before painting or a third finish coat. On surfaces previously painted with oil-based paint: Surfaces painted with an oil finish, which are sound and do not need significant preparation, may be painted without priming. Apply HOLLANDLAC Brilliant 98 following a light sanding and thorough cleaning to remove dust and foreign material. Painted surfaces that do require heavy sanding or scraping should be cleaned and then treated with FPE Oil Primer/Undercoat. Then apply two thin coats of HOLLANDLAC Brilliant 98. HOLLANDLAC Brilliant 98 should be stirred well before use and applied in thin, even coats. Under normal environmental conditions this product requires no thinning. Clean up with FPE Mineral Spirits. Do not apply on exterior work when the temperature is below 40˚F or above 90˚F, or if rain threatens. Work area should always be well ventilated. IMPORTANT NOTE For optimal results: Sanding between coats of HOLLANDLAC is not required for adhesion. However, when applying HOLLANDLAC Brilliant to high profile areas subject to close eye contact, we recommend a light sanding with a fine grade of sandpaper (220 or higher grit) between coats. This step should be followed by a thorough vacuuming or wiping down with a clean rag or tack cloth. Care should be taken to allow adequate drying time between coats and before sanding. The durability of this finish on floors can be enhanced substantially by allowing the finish to cure for at least one week before receiving heavy traffic. Sanding is for appearance and is not required for adhesion. NOTE For a spectacular, mirror-like finish on walls and woodwork, use FPE Brushing Putty or Swedish Putty before applying HOLLANDLAC. These unique products (refer to Directory) produce a luxurious, durable, glass-like finish when used to prepare a surface prior to the application of HOLLANDLAC Brilliant 98. MAINTENANCE Easy to clean. Wash (scrub if necessary) with a mild, powdered detergent and warm water, rinse and dry (buff) thoroughly to prevent water spots. PACKAGING/COVERAGE (Stock Colors) .50L container covers 84 square feet .75L container covers 126 square feet 1L container covers 168 square feet 2.5L container covers 420 square feet STORAGE Keep in cool dry area – unopened cans should retain product integrity for minimum of 10 years. TECHNICAL SPECIFICATIONS Binder: Alkyd resins Pigments: Titanium Dioxide, mineral and organic color pigments Solvent: Mineral Spirits Clean up: FPE Mineral Spirits Specific gravity [g/cm3]: 1.15 white (varies according to color) Solids contents (white): by weight: 70% by volume: 55% Viscosity: 90 – 95 KU Specular gloss: (85˚): appr. 98 GU Recommended film thickness: wet: 60 microns/coat dry: 30 microns/coat Drying time: 4 to 6 hours dust free, 16 hours recoatable Curing Period: 21 days. After this amount of time, the paint film will be at its maximum hardness. VOC: 340 g/l [/vc_column_text][/vc_column][/vc_row][vc_row type=”in_container” full_screen_row_position=”middle” column_margin=”default” column_direction=”default” column_direction_tablet=”default” column_direction_phone=”default” scene_position=”center” text_color=”dark” text_align=”left” row_border_radius=”none” row_border_radius_applies=”bg” overflow=”visible” overlay_strength=”0.3″ gradient_direction=”left_to_right” shape_divider_position=”bottom” bg_image_animation=”none”][vc_column column_padding=”no-extra-padding” column_padding_tablet=”inherit” column_padding_phone=”inherit” column_padding_position=”all” column_element_direction_desktop=”default” column_element_spacing=”default” desktop_text_alignment=”default” tablet_text_alignment=”default” phone_text_alignment=”default” background_color_opacity=”1″ background_hover_color_opacity=”1″ column_backdrop_filter=”none” column_shadow=”none” column_border_radius=”none” column_link_target=”_self” column_position=”default” gradient_direction=”left_to_right” overlay_strength=”0.3″ width=”1/1″ tablet_width_inherit=”default” animation_type=”default” bg_image_animation=”none” border_type=”simple” column_border_width=”none” column_border_style=”solid”][vc_column_text css=”” text_direction=”default”] TECHNICAL DATA SHEET MARSCHALL LAB REPORT Marschall Lab Report MATERIAL SAFETY DATA SHEET Hollandlac Brilliant Base Transparent – FOR U.S. ONLY Hollandlac Brilliant Base White – FOR U.S. ONLY Hollandlac Brilliant Black – FOR U.S. ONLY Hollandlac Solvent Borne Colorants – FOR U.S. ONLY: Colorant Alk20 White Colorant Alk 21 Organic Yellow Colorant Alk 22 Organic Orange Colorant Alk 23 Organic Red Colorant Alk 24 Organic Violet Colorant Alk 241 Blue Violet Colorant Alk 25 Phthalic Blue Colorant Alk 26 Phthalic Green Colorant Alk 261 Oxide Green Colorant Alk 27 Oxide Yellow Colorant Alk 28 Oxide Red Colorant Alk 30 Black [/vc_column_text][/vc_column][/vc_row]

$65.00

[vc_row type=”in_container” full_screen_row_position=”middle” column_margin=”default” column_direction=”default” column_direction_tablet=”default” column_direction_phone=”default” scene_position=”center” text_color=”dark” text_align=”left” row_border_radius=”none” row_border_radius_applies=”bg” overflow=”visible” overlay_strength=”0.3″ gradient_direction=”left_to_right” shape_divider_position=”bottom” bg_image_animation=”none”][vc_column column_padding=”no-extra-padding” column_padding_tablet=”inherit” column_padding_phone=”inherit” column_padding_position=”all” column_element_direction_desktop=”default” column_element_spacing=”default” desktop_text_alignment=”default” tablet_text_alignment=”default” phone_text_alignment=”default” background_color_opacity=”1″ background_hover_color_opacity=”1″ column_backdrop_filter=”none” column_shadow=”none” column_border_radius=”none” column_link_target=”_self” column_position=”default” gradient_direction=”left_to_right” overlay_strength=”0.3″ width=”1/1″ tablet_width_inherit=”default” animation_type=”default” bg_image_animation=”none” border_type=”simple” column_border_width=”none” column_border_style=”solid”][vc_column_text] DESCRIPTION HOLLANDLAC Satin is a high performance enamel paint with a sophisticated, understated sheen. This formulation yields superior coverage and an easily maintained washable finish. HOLLANDLAC Satin flows on easily, levels beautifully and conceals minor surface flaws. Although all paints perform best when applied over a FPE Primer/Undercoat, HOLLANDLAC Satin does not usually require a primer when applied over clean, previously painted oil finishes in good condition. HOLLANDLAC white resists yellowing. However, even the highest quality white oil finishes will yellow in the constant absence of ultraviolet light; i.e., inside of a closet or in a room with little direct sunshine. (See EUROLUX, page 18, non-yellowing white.) IMPORTANT NOTE Fine Paints of Europe sells paint systems. We do not sell individual products for use with primers from other manufacturers. Please make certain that you are using the correct Fine Paints of Europe primer specified for your coating. Coverage rates with Fine Paints of Europe are dramatically better than with domestic coatings when used with one of our “high build- high tooth” primers. Never apply a Fine Paints of Europe paint to a surface which has been primed with a sealer such as Shellac, Bin™ or Kilz™. These are fine products when used for their intended purpose but they do not provide adequate friction for great adhesion with our coatings. SURFACE PREPARATION Surfaces to be painted should be dry, free of dust, chalk, grease and any foreign material that would affect adhesion. Grease and wax should be removed with an appropriate solvent (especially important on kitchen cabinets where use of a deglossing agent is recommended before painting or priming). Dust and chalk must be removed by scrubbing with a mild powdered detergent and warm water; rinse with fresh water. Do no prepare surface by washing with a liquid cleaning agent which can interfere with adhesion. When mildew is encountered, it must be removed thoroughly by washing with a mild bleach solution. It is imperative that all bleach residues be removed by rinsing. When painting metal surfaces, all corrosion and rust must be removed, them primed with appropriate FPE metal primer. When painting new wooden surfaces, all knots must be sealed with shellac before priming to prevent bleeding. Glossy surfaces must be dulled by a light hand sanding or a dulling agent (liquid sandpaper). EXTERIOR USE This finish is suitable for use on exterior doors, trim, shutters, furniture, etc. when applied as a finish coat over two coats of HOLLANDLAC Brilliant Enamel in the same color. (NOTE: One coat of Brilliant enamel is adequate as a “sub-coat” in mild climates) Refer to instructions for HOLLANDLAC Brilliant. APPLICATION Many professionals have discovered that the easiest way to apply HOLLANDLAC Satin is over one coat of HOLLANDLAC Brilliant in the same color. This approach affords faster application, better leveling and better chip resistance. Please note: Fine Paints of Europe recognizes spray application as an excellent method to apply our coatings, however we do not consult on the specifications nor the equipment needed to do so. HOLLANDLAC SATIN Tools: Use a first quality, clean, natural bristle brush. We recommend the following brushes for this finish: Omega Small Flats (S57’s) or Omega Round Sash (S203’s) or premium quality professional roller covers in 3/8” nap. New, unpainted surfaces and those previously painted with waterborne finishes: After surface preparation, apply one coat appropriate FPE Primer/Undercoat. use EUROLUX on new sheetrock, FPE Oil Primer/Undercoat or ECO Primer for wood, Primer AC for ferrous metal, Key Primer for non-ferrous metals and plastics. Primer coat should be sanded with 220 grit paper and tacked clean before receiving two thin, even coats of HOLLANDLAC Satin. Allow each coat to dry overnight. For added durability and chip resistance (kitchen cabinets, doors) apply two primer coats before painting and apply first coat of HOLLANDLAC in Brilliant. Finish job with HOLLANDLAC Satin. On interior surfaces previously painted with oil-based paints: Surfaces painted with an oil finish that are sound and do not need significant preparation may be painted without priming. Apply two thin coats of HOLLANDLAC Satin following a light sanding and thorough cleaning to remove dust and foreign material. Painted surfaces which do require heavy sanding or scraping should be cleaned and then coated with the appropriate FPE Primer/Undercoat before receiving a HOLLANDLAC Satin system. HOLLANDLAC should be stirred well before use and applied in thin, even coats. Under normal environmental conditions this product requires no thinning. Clean up with FPE Mineral Spirits. This paint takes fourteen to twenty-one days to cure to a Satin finish. Work area should always be well ventilated. IMPORTANT For optimal results: When applying HOLLANDLAC Satin, we recommend a light sanding with a fine grade of sandpaper – 220 or higher grit – between coats. This step should be followed by a light vacuuming or wiping down with a clean rag or tack cloth. Care should be taken to allow complete drying between coats and before sanding. MAINTENANCE Easy to clean. Wash with mild powdered detergent and warm water, rinse and dry (buff) thoroughly to avoid water spots. PACKAGING/COVERAGE .50L container cover 72 square feet .75L container covers 111 square feet 1L container covers 144 square feet 2.5L container covers 370 square feet STORAGE Almost unlimited in original unopened containers. TECHNICAL SPECIFICATIONS Binder: Urethane alkyd resin combination Pigments: Titanium Dioxide, mineral and organic color pigments Solvent: Mineral Spirits Clean up: FPE Mineral Spirits Specific gravity [g/cm3]: 1.28 white (varies according to color) Solids by contents (white): by weight: 71% by volume: 51% Viscosity: 95 – 100 KU Specular gloss: (60˚): 20.5 GU Recommended film thickness: wet: 65 microns/coat dry: 33 microns/coat Drying Time: 2 hours dust free 16 hours recoatable depending on humidity Curing Period: 21 days. After this amount of time, the paint film will be at its maximum hardness. VOC: 330 g/l [/vc_column_text][/vc_column][/vc_row][vc_row type=”in_container” full_screen_row_position=”middle” column_margin=”default” column_direction=”default” column_direction_tablet=”default” column_direction_phone=”default” scene_position=”center” text_color=”dark” text_align=”left” row_border_radius=”none” row_border_radius_applies=”bg” overflow=”visible” overlay_strength=”0.3″ gradient_direction=”left_to_right” shape_divider_position=”bottom” bg_image_animation=”none”][vc_column column_padding=”no-extra-padding” column_padding_tablet=”inherit” column_padding_phone=”inherit” column_padding_position=”all” column_element_direction_desktop=”default” column_element_spacing=”default” desktop_text_alignment=”default” tablet_text_alignment=”default” phone_text_alignment=”default” background_color_opacity=”1″ background_hover_color_opacity=”1″ column_backdrop_filter=”none” column_shadow=”none” column_border_radius=”none” column_link_target=”_self” column_position=”default” gradient_direction=”left_to_right” overlay_strength=”0.3″ width=”1/1″ tablet_width_inherit=”default” animation_type=”default” bg_image_animation=”none” border_type=”simple” column_border_width=”none” column_border_style=”solid”][vc_column_text css=”” text_direction=”default”] TECHNICAL DATA SHEET MARSCHALL LAB REPORT Marschall Lab Report MATERIAL SAFETY DATA SHEET Hollandlac Satin Base Transparent – FOR U.S. ONLY Hollandlac Satin Base White – FOR U.S. ONLY Hollandlac Satin Various Colors – FOR U.S. ONLY Hollandlac Solvent Borne Colorants – FOR U.S. ONLY: Colorant Alk20 White Colorant Alk 21 Organic Yellow Colorant Alk 22 Organic Orange Colorant Alk 23 Organic Red Colorant Alk 24 Organic Violet Colorant Alk 241 Blue Violet Colorant Alk 25 Phthalic Blue Colorant Alk 26 Phthalic Green Colorant Alk 261 Oxide Green Colorant Alk 27 Oxide Yellow Colorant Alk 28 Oxide Red Colorant Alk 30 Black [/vc_column_text][/vc_column][/vc_row]

$80.00

[vc_row type=”in_container” full_screen_row_position=”middle” column_margin=”default” column_direction=”default” column_direction_tablet=”default” column_direction_phone=”default” scene_position=”center” text_color=”dark” text_align=”left” row_border_radius=”none” row_border_radius_applies=”bg” row_position_desktop=”default” row_position_tablet=”inherit” row_position_phone=”inherit” overflow=”visible” overlay_strength=”0.3″ gradient_direction=”left_to_right” shape_divider_position=”bottom” bg_image_animation=”none”][vc_column column_padding=”no-extra-padding” column_padding_tablet=”inherit” column_padding_phone=”inherit” column_padding_position=”all” flex_gap_desktop=”10px” column_element_direction_desktop=”default” column_element_spacing=”default” desktop_text_alignment=”default” tablet_text_alignment=”default” phone_text_alignment=”default” background_color_opacity=”1″ background_hover_color_opacity=”1″ column_backdrop_filter=”none” column_shadow=”none” column_border_radius=”none” column_link_target=”_self” column_position=”default” gradient_direction=”left_to_right” overlay_strength=”0.3″ width=”1/1″ tablet_width_inherit=”default” animation_type=”default” bg_image_animation=”none” border_type=”simple” column_border_width=”none” column_border_style=”solid”][vc_column_text css=”” text_direction=”default”] Applications: Walls, ceilings, windows, doors, trim, siding, cabinets, shutters, garden furniture – as a rule, ECO is suitable for use on surfaces which previously would have been coated with Brilliant or Satin enamel. ECO is the ultimate exterior housepaint–especially when used during the construction phase where all wooden elements are encapsulated with FPE Oil Primer or ECO Primer and painted on all sides before nailing in place. This system can be expected to yield fifteen to twenty years of beauty and protection. ECO is not recommended for exterior use on masonry surfaces, stucco, or homes which have previously experienced moisture related paint problems. ECO is primarily intended for use on interior and exterior woodwork and trim. It may also be used on interior walls and ceilings which have been properly prepared and primed with the appropriate FPE Primer. However, please note that the use of our 100% acrylic Eurolux Matte or Flat finish paints is what is typically recommended on walls and ceilings.[/vc_column_text][vc_column_text] IMPORTANT NOTE Fine Paints of Europe sells paint systems. We do not sell individual products for use with primers from other manufacturers. Please make certain that you are using the correct Fine Paints of Europe primer specified for your coating. Coverage rates with Fine Paints of Europe are dramatically better than with domestic coatings when used with one of our “high build- high tooth” primers. Never apply a Fine Paints of Europe paint to a surface which has been primed with a sealer such as Shellac, Bin™ or Kilz™. These are fine products when used for their intended purpose but they do not provide adequate friction for great adhesion with our coatings. SURFACE PREPARATION Surfaces to be painted should be dry, free of dust, chalk, grease, rust and all foreign material which would affect adhesion. Dust and Chalk must be removed by scrubbing with mild, powdered detergent and warm water and rinsed with fresh water. NEVER prepare surfaces by washing with a petroleum-based liquid soap, which can affect adhesion. Grease and wax should be removed with lacquer thinner. Surfaces such as kitchen cabinets or furniture that may have been waxed with a silicon-based product, or stained, varnished or oiled should be treated with a deglossing agent such as Wil-Bond before priming with ECO or FPE Oil Primer/Undercoat. When mildew is encountered, it must be removed thoroughly by washing with a mild bleach and TSP solution. It is imperative that all bleach residue be removed by rinsing with water. When painting metal surfaces, all corrosion and rust must be removed; prime with the appropriate FPE metal primer. When painting wooden surfaces, knots must be sealed with shellac to prevent bleeding before priming. Glossy surfaces must be dulled by a light hand sanding or a dulling agent (liquid sandpaper). TIP: KIDDIE POOLS FOR ADULTS One of the few disadvantages of working with great brilliant enamels like Hollandlac and ECO is that pigments in both of these coatings are extremely finely ground, very much like automobile paints and therefore these paints tend to reveal airborne contamination (the type of dust particles that float in the air of even the cleanest homes) to a much greater degree than coarsely ground, lower quality coatings. Interesting to discover a marketing advantage offered by low quality coatings which is not yet being extolled by the big boxes! When painting furniture or cabinet components we recommend that the work be done in a garage or basement with a “wet floor”. The floor should be wet down with mop and bucket at least 24 hours prior to application of paint and kept wet throughout the process in order to serve as a magnet to airborne dust. Where it is not possible to move work to areas suitable for wet floor treatment, many of our best professional contractors utilize inexpensive “kiddie pools” in which they place a half inch of water at least a day or two before beginning paint application. The use of a fan during this air-cleansing period is recommended as it is the circulation of air over water which effectively cleanses the air. The fan and heat/air conditioning system should be shut off immediately before beginning application of coatings and kept off for two hours after completion of paint application in order to prevent air movement before the paint sets up. (Exhaust fans required when working with solventborne coatings should not be shut off.) APPLICATION Tools: Apply by brush, roller or spray. Please note: Fine Paints of Europe recognizes spray application as an excellent method to apply our coatings, however we do not consult on the specifications nor the equipment needed to do so. New, unpainted surfaces: After surface preparation (sanding, etc.) and cleaning, apply one coat ECO Primer/Undercoat or FPE Oil Primer/Undercoat. If painting exterior wood, moisture levels should not exceed 14%. Primer coat should be sanded with 220 grit paper. Then apply two generous, even coats of ECO. Apply the paint and then walk away. Do not overwork this finish.Sanding between top coats of ECO Brilliant with 220 to 320 grit paper is necessary for adhesion. Sanding between top coats of ECO Brilliant with 220 to 320 grit paper is necessary for adhesion On surfaces previously painted: Surfaces previously painted with latex paint should be primed first prior to painting. Apply ECO following a light sanding and thorough cleaning to remove dust and foreign material. Painted surfaces that do require heavy sanding or scraping should be cleaned and then primed with ECO or FPE Oil Primer/ Undercoat before applying two generous coats of ECO. Apply the paint and then walk away. Do not overwork this paint – brush it on and walk away. ECO should be stirred well before use. If this finish drags or does not level perfectly it may be thinned slightly with water. Do not apply at temperatures below 40°F or above 80°F or when relative humidity exceeds 80%. MAINTENANCE Easy to clean. Wash (scrub if necessary) with a mild, powdered detergent and warm water, rinse and dry (buff) thoroughly to prevent water spots. PACKAGING/COVERAGE 1L container covers 168 square feet 2.5L container covers 420 square feet TECHNICAL SPECIFICATIONS Binder: urethane alkyd emulsion Pigments: Titanium Dioxide, mineral and organic color pigments Vehicle: water Thinner: water Specific gravity [g/cm3]: Brilliant: 1.26 white Satin: 1.29 white Solid contents: Brilliant by weight: 50% by volume: 37% Satin by weight: 49% by volume: 34% Viscosity: Brilliant: 110-115 KU Satin: 117-123 KU Specular Gloss (60°): Brilliant: 80 GU Satin: 55-65 GU Drying time: dust free after 1 hour, Re-coatable after 16 hours Curing Period: 21 days. After this amount of time, the paint film will be at its maximum hardness. VOC: 44 Recommended Mil Thickness per coat: 1 dry coat of 35 microns or 1.378 Mil 1 wet coat of 90 microns or 3.543 Mil *When spraying, additional coats may be necessary to achieve this Mil Thickness [/vc_column_text][vc_column_text css=”” text_direction=”default”] TECHNICAL DATA SHEET MATERIAL SAFETY DATA SHEET Eco Brilliant Base Transparent – FOR U.S. ONLY Eco Brilliant Base White – FOR U.S. ONLY Eco Brilliant Colors – FOR U.S. ONLY WATERBORNE COLORANTS – FOR U.S. ONLY: Colorant AQ 600 White USA Colorant AQ 610 Organic Yellow USA Colorant AQ 620 Organic Orange USA Colorant AQ 630 Organic Red USA Colorant AQ 644 Organic Violet USA Colorant AQ 641 Blue Violet USA Colorant AQ 650 Phtalic Blue USA Colorant AQ 660 Phtalic Green USA Colorant AQ 661 Oxide Green USA Colorant AQ 670 Oxide Yellow USA Colorant AQ 688 Oxide Red USA Colorant AQ 700 Black USA INDEPDENDENT LAB REPORTS Independent lab reports for Eco Brilliant from DL Labs [/vc_column_text][/vc_column][/vc_row]