BestMounts Multi-Gang Non-Metallic Electrical Box Extender - White, (2-Pack) with 6-32 Flat Head screws
ID: #629850
Description
The Multi-Gang Non-Metallic Box Extender is designed to mount on non-metallic boxes to bring flush to the surface. This item is gangable, allowing configurations between 1-5-Gangs. Made of durable PVC material, the box extender is non-conductive and non-corrosive making it safe to install and resistant to weather and temperature. Easily make 2, 3, 4 or 5-gang extension Includes box extenders and #6-32 x 1-3/4 in. screws Will not rust or conduct electricity BestMounts 1-Gang Electrical Power Outlet Box Extender - White, (2-Pack) with 6-32 Flat Head screws Allows the contractor to comply with 2005 NEC Article 314 20 Works in handy boxes and 4-Inch square electrical boxes with plaster rings for single switches or receptacle Manufactured from 105-Degree C continuous use 94-Volt rated flame retardant plastic for safer installations Functions with all standard devices, switches and GFCIs Levels and supports the wiring device where the box is set back from the wall surface adjusts up to a 1-1/2-Inch box extension LOOSE OUTLET or RECESSED ELECTRICAL OUTLET BOX? Our electrical outlet extender and light switch extender is the perfect solution! Much easier to install than an outlet extender box. INSTALLED A NEW TILE, STONE or GRANITE BACKSPLASH? Our electrical outlet extenders for tile backsplash will finish off your awesome new project. The perfect wall plate spacer for outlets. NO ELECTRICIAN NEEDED! You don’t have to call an expert to come install an outlet box extender or outlet extension box. Our electric box extenders are easy to install and include outlet screws long enough for even the thickest tile! UNIVERSAL FIT: Works perfect as a single gang box extender or as a 2 gang outlet extender. Single switch plate extender or multiple switch plate extender. Electrical Power Outlet Box Extender 1-Gang, White The purpose of this Electrical Box Extender is to allow you to pull out your electrical box so that it lays flush with the newly installed wall covering, without having to remove or re-positioning the existing box. Allows you to correct setbacks and insulate devices with an easy installation design Used for extending set back electrical boxes up to 1-1/2-inches, levels and supports wiring device Automatically levels and supports outlets, switches, GFCIs, and other standard devices Works with handy boxes and 4-inch square electrical boxes with plaster rings for single switches Used for extending set back electrical boxes up to 1-1/2-inch, levels and supports wiring device
Price
CAD 14.99
Last Updated
10 August 2026, 16:08 UTC
Store Information
physical store
Location
More from Angel Electronics
View all
1 ft (30 cm) CAT6 500 MHz UTP Network Cable (Black)
CAD 1.99
Straight-through patch cables are used to connect a PC to a wall outlet or to connect a patch panel to a hub Straight-through patch cables are used to connect a PC to a wall outlet or to connect a patch panel to a hub CAT6 network cables transmit at up to 1000 Mbps Compatible with 100 Base / 1000 Base T (gigabit) networks Cable: 24 AWG, 4 pair UTP, CMG, type CM (cUL) certified
1 ft (30 cm) CAT6 500 MHz UTP Network Cable (Blue)
CAD 1.99
Straight-through patch cables are used to connect a PC to a wall outlet or to connect a patch panel to a hub Patch cables are designed to connect various forms of networking hardware. Some typical applications would be to connect network adapters, hubs, patch panels, switches, routers, DSL/Cable modems and other 10/100/1000 BASE-T (IEEE 802.3) applications. These Cat6 patch cables have a moulded, snag-free boot around each connector. Specs: Colour: OrangeConnectors: 2 x RJ45 Male Cable: 4-pair 24 AWG UTP Cat 6 Stranded Copper
1 ft (30 cm) CAT6 500 MHz UTP Network Cable (Green)
CAD 1.99
Straight-through patch cables are used to connect a PC to a wall outlet or to connect a patch panel to a hub Straight-through patch cables are used to connect a PC to a wall outlet or to connect a patch panel to a hub CAT6 network cables transmit at up to 1000 Mbps Compatible with 100 Base / 1000 Base T (gigabit) networks Cable: 24 AWG, 4 pair UTP, CMG, type CM (cUL) certified
1 ft (30 cm) CAT6 500 MHz UTP Network Cable (Grey)
CAD 1.99
Straight-through patch cables are used to connect a PC to a wall outlet or to connect a patch panel to a hub Straight-through patch cables are used to connect a PC to a wall outlet or to connect a patch panel to a hub CAT6 network cables transmit at up to 1000 Mbps Compatible with 100 Base / 1000 Base T (gigabit) networks Cable: 24 AWG, 4 pair UTP, CMG, type CM (cUL) certified
1 ft (30 cm) CAT6 500 MHz UTP Network Cable (Orange)
CAD 1.99
Straight-through patch cables are used to connect a PC to a wall outlet or to connect a patch panel to a hub Patch cables are designed to connect various forms of networking hardware. Some typical applications would be to connect network adapters, hubs, patch panels, switches, routers, DSL/Cable modems and other 10/100/1000 BASE-T (IEEE 802.3) applications. These Cat6 patch cables have a moulded, snag-free boot around each connector. Specs: Colour: OrangeConnectors: 2 x RJ45 Male Cable: 4-pair 24 AWG UTP Cat 6 Stranded Copper
1 ft (30 cm) CAT6 500 MHz UTP Network Cable (Purple)
CAD 1.99
Straight-through patch cables are used to connect a PC to a wall outlet or to connect a patch panel to a hub Straight-through patch cables are used to connect a PC to a wall outlet or to connect a patch panel to a hub CAT6 network cables transmit at up to 1000 Mbps Compatible with 100 Base / 1000 Base T (gigabit) networks Cable: 24 AWG, 4 pair UTP, CMG, type CM (cUL) certified