
Tenda 300 Mbps Wireless-N Router (W307R)
ID: #630447
Description
The W307R is a 300Mbps Wireless-N router, wireless access point, four-port switch, and firewall all-in-one. The W307R is a good choice for small or home offices in search of a fast, secure, easy-to-use, and feature-rich wireless network The W307R is a 300Mbps Wireless-N router, wireless access point, four-port switch, and firewall all-in-one. Utilizing advanced MIMO technology, WLAN range is double that of 802.11g products. The W330R also provides WDS (Wireless Distribution System), enabling the bridging of other wireless routers and extending wireless coverage. Plenty of features are bundled to better secure and manage a network, including; port and MAC address filters, WPS (Wi-Fi Protected Setup), QoS bandwidth control, and the ability to disable SSID broadcast. Management from anywhere is conveniently accomplished through a web interface, and a Tenda-developed setup wizard makes installation easy for anyone. The W307R is a good choice for small or home offices in search of a fast, secure, easy-to-use, and feature-rich wireless network. Wireless AP, Router, 4-Port Switch, and Firewall Provides up to 300Mbps transmission rates WPS (PBC and PIN) enabled device Complies with IEEE 802.11n, IEEE 802.11g, IEEE 802.11b, IEEE 802.3, and IEEE 802.3u standards MIMO technology utilizes reflection signal to greatly increase the transmission strength and range Double the transmission range of 802.11g products Meets 64/128-bit WEP, WPA, and WPA2 security standards Setup wizard for fast and easy configurations Supports RTS/CTS protocol and data partitioning Provides one 10/100Mbps Auto-Negotiation Ethernet WAN port Provides four 10/100Mbps Auto-Negotiation Ethernet LAN ports Supports xDSL/cable modem static, dynamic, and PPPOE connections Supports remote/local web management Supports WMM for improved audio and video signals Supports SSID stealth mode and a MAC address access control Supports access control of up to 30 entries of MAC addresses Supports Auto MDI/MDIX Supports wireless roaming technology for highly efficient connections Supports auto negotiation/manual mode for 802.11b/802.11g/802.11n Supports UPnP and DDNS Administration interface supports Firefox 1.0, IE5.5 or above Supports SNTP Supports virtual server, DMZ host Supports DHCP server/client Supports wireless channel auto-selection Supports LAN access control over Internet connection Provides a router system log Supports WDS Supports QoS bandwidth control
Price
CAD 29.99
Last Updated
10 August 2026, 16:09 UTC
Store Information
physical store
Location
More from Angel Electronics
View all
1 ft (30 cm) CAT6 500 MHz UTP Network Cable (Black)
CAD 1.99
Straight-through patch cables are used to connect a PC to a wall outlet or to connect a patch panel to a hub Straight-through patch cables are used to connect a PC to a wall outlet or to connect a patch panel to a hub CAT6 network cables transmit at up to 1000 Mbps Compatible with 100 Base / 1000 Base T (gigabit) networks Cable: 24 AWG, 4 pair UTP, CMG, type CM (cUL) certified

1 ft (30 cm) CAT6 500 MHz UTP Network Cable (Blue)
CAD 1.99
Straight-through patch cables are used to connect a PC to a wall outlet or to connect a patch panel to a hub Patch cables are designed to connect various forms of networking hardware. Some typical applications would be to connect network adapters, hubs, patch panels, switches, routers, DSL/Cable modems and other 10/100/1000 BASE-T (IEEE 802.3) applications. These Cat6 patch cables have a moulded, snag-free boot around each connector. Specs: Colour: OrangeConnectors: 2 x RJ45 Male Cable: 4-pair 24 AWG UTP Cat 6 Stranded Copper

1 ft (30 cm) CAT6 500 MHz UTP Network Cable (Green)
CAD 1.99
Straight-through patch cables are used to connect a PC to a wall outlet or to connect a patch panel to a hub Straight-through patch cables are used to connect a PC to a wall outlet or to connect a patch panel to a hub CAT6 network cables transmit at up to 1000 Mbps Compatible with 100 Base / 1000 Base T (gigabit) networks Cable: 24 AWG, 4 pair UTP, CMG, type CM (cUL) certified

1 ft (30 cm) CAT6 500 MHz UTP Network Cable (Grey)
CAD 1.99
Straight-through patch cables are used to connect a PC to a wall outlet or to connect a patch panel to a hub Straight-through patch cables are used to connect a PC to a wall outlet or to connect a patch panel to a hub CAT6 network cables transmit at up to 1000 Mbps Compatible with 100 Base / 1000 Base T (gigabit) networks Cable: 24 AWG, 4 pair UTP, CMG, type CM (cUL) certified

1 ft (30 cm) CAT6 500 MHz UTP Network Cable (Orange)
CAD 1.99
Straight-through patch cables are used to connect a PC to a wall outlet or to connect a patch panel to a hub Patch cables are designed to connect various forms of networking hardware. Some typical applications would be to connect network adapters, hubs, patch panels, switches, routers, DSL/Cable modems and other 10/100/1000 BASE-T (IEEE 802.3) applications. These Cat6 patch cables have a moulded, snag-free boot around each connector. Specs: Colour: OrangeConnectors: 2 x RJ45 Male Cable: 4-pair 24 AWG UTP Cat 6 Stranded Copper

1 ft (30 cm) CAT6 500 MHz UTP Network Cable (Purple)
CAD 1.99
Straight-through patch cables are used to connect a PC to a wall outlet or to connect a patch panel to a hub Straight-through patch cables are used to connect a PC to a wall outlet or to connect a patch panel to a hub CAT6 network cables transmit at up to 1000 Mbps Compatible with 100 Base / 1000 Base T (gigabit) networks Cable: 24 AWG, 4 pair UTP, CMG, type CM (cUL) certified