STAB HH90 Satellite Dish Motor
ID: #630519
Description
Brief Description Fortec Star Horizon-to-Horizon STAB Motor model HH90 is for use with dishes up to 95cm in diameter. The motor uses DiSEqC 1.2 communication protocol and is compatible with all receivers that use standard DiSEqC 1.2 or USALS (Universal Satellite Automatic Location System) to control the movement of the dish. FEATURES: Motorizations for satellite dishes mod. HH90 Rotor SAT HH is a motor that allows to point any satellite dish towards all visible satellites in the polar orbit. The characteristics that make Rotor SAT HH particularly valid are as follows: Maximum precision. Mechanical robustness. Connection without external feeding, only by coaxial cable. Reduced dimensions. Maximum easiness of installation. Rotor SAT HH is directly controlled by DiSEqC1.2 or USALS compatible receivers , where the rotation of the motor automatically begin when selecting the required channel. For all those receiver not provided with DiSEqC , STAB has developed the interfaces MS 220, MP 01, MP 02 (page.5) to drive the motors by the Tv cable. SPECIFICATIONS: Operating Protocol DiSEqC 1.2 Maximum Antenna Diameter 95 cm Maximum Antenna Weight 10 Kg Pole Support Diameter From 35 to 68 mm Antenna Support Length 145 mm Antenna Support Diameter 42 mm Rotation Angle ± 65 ° Rotation Speed 2.4 °/s (18V); 1.5 °/s (13V) Operating Power Supply 13 / 18 Vdc Consumption in Stand-by Mode 40 mA Consumption in Operating Mode 180 mA Starting Consumption (max) 350mA Wattage 6.3 W (Max.), 0.4 W (Min.) Stand-by Operating Temperature -40 °C· +80 °C Maximum Relative Humidity 100% Programmable Positions (DiSEqC 1.2) 49 satellites Preset Positions (DiSEqC 1.2) 28 satellites Programmable Positions (USALS) No Limits Connectors F-type Connection Satellite Coaxial Cable Mechanical Limits ± 72 ° Software Programmable Limits From 5° to 62° Fine Tuning Impulse 0.1 ° Pole Inclination From 10 ° to 70 ° Weight 2.6 kg
Price
CAD 199.95
Last Updated
10 August 2026, 16:09 UTC
Store Information
physical store
Location
More from Angel Electronics
View all
1 ft (30 cm) CAT6 500 MHz UTP Network Cable (Black)
CAD 1.99
Straight-through patch cables are used to connect a PC to a wall outlet or to connect a patch panel to a hub Straight-through patch cables are used to connect a PC to a wall outlet or to connect a patch panel to a hub CAT6 network cables transmit at up to 1000 Mbps Compatible with 100 Base / 1000 Base T (gigabit) networks Cable: 24 AWG, 4 pair UTP, CMG, type CM (cUL) certified
1 ft (30 cm) CAT6 500 MHz UTP Network Cable (Blue)
CAD 1.99
Straight-through patch cables are used to connect a PC to a wall outlet or to connect a patch panel to a hub Patch cables are designed to connect various forms of networking hardware. Some typical applications would be to connect network adapters, hubs, patch panels, switches, routers, DSL/Cable modems and other 10/100/1000 BASE-T (IEEE 802.3) applications. These Cat6 patch cables have a moulded, snag-free boot around each connector. Specs: Colour: OrangeConnectors: 2 x RJ45 Male Cable: 4-pair 24 AWG UTP Cat 6 Stranded Copper
1 ft (30 cm) CAT6 500 MHz UTP Network Cable (Green)
CAD 1.99
Straight-through patch cables are used to connect a PC to a wall outlet or to connect a patch panel to a hub Straight-through patch cables are used to connect a PC to a wall outlet or to connect a patch panel to a hub CAT6 network cables transmit at up to 1000 Mbps Compatible with 100 Base / 1000 Base T (gigabit) networks Cable: 24 AWG, 4 pair UTP, CMG, type CM (cUL) certified
1 ft (30 cm) CAT6 500 MHz UTP Network Cable (Grey)
CAD 1.99
Straight-through patch cables are used to connect a PC to a wall outlet or to connect a patch panel to a hub Straight-through patch cables are used to connect a PC to a wall outlet or to connect a patch panel to a hub CAT6 network cables transmit at up to 1000 Mbps Compatible with 100 Base / 1000 Base T (gigabit) networks Cable: 24 AWG, 4 pair UTP, CMG, type CM (cUL) certified
1 ft (30 cm) CAT6 500 MHz UTP Network Cable (Orange)
CAD 1.99
Straight-through patch cables are used to connect a PC to a wall outlet or to connect a patch panel to a hub Patch cables are designed to connect various forms of networking hardware. Some typical applications would be to connect network adapters, hubs, patch panels, switches, routers, DSL/Cable modems and other 10/100/1000 BASE-T (IEEE 802.3) applications. These Cat6 patch cables have a moulded, snag-free boot around each connector. Specs: Colour: OrangeConnectors: 2 x RJ45 Male Cable: 4-pair 24 AWG UTP Cat 6 Stranded Copper
1 ft (30 cm) CAT6 500 MHz UTP Network Cable (Purple)
CAD 1.99
Straight-through patch cables are used to connect a PC to a wall outlet or to connect a patch panel to a hub Straight-through patch cables are used to connect a PC to a wall outlet or to connect a patch panel to a hub CAT6 network cables transmit at up to 1000 Mbps Compatible with 100 Base / 1000 Base T (gigabit) networks Cable: 24 AWG, 4 pair UTP, CMG, type CM (cUL) certified