Dish Pro Plus Dual LNB (Twin LNBF )
ID: #631820
Description
Dish Pro Plus Dual LNB The DP Plus Twin LNBF allows you to receive both 82 and 91 degrees West satellites on a Bell TV system in a single integrated unit which has built in SW-21 switching on both outputs. In addition, you may feed a dual tuner PVR receiver using only one coax by using the DPP separator (purchased separately) in order to make your installation easier. Up to 2 single or dual tuner receivers are supported with this LNBF. For 3 or 4 receivers, the Dish Pro Plus DPP Quad LNBF is required. Keywords: dpp, dishnetwork
Price
CAD 59.95
Last Updated
10 August 2026, 16:10 UTC
Store Information
physical store
Location
More from Angel Electronics
View all
1 ft (30 cm) CAT6 500 MHz UTP Network Cable (Black)
CAD 1.99
Straight-through patch cables are used to connect a PC to a wall outlet or to connect a patch panel to a hub Straight-through patch cables are used to connect a PC to a wall outlet or to connect a patch panel to a hub CAT6 network cables transmit at up to 1000 Mbps Compatible with 100 Base / 1000 Base T (gigabit) networks Cable: 24 AWG, 4 pair UTP, CMG, type CM (cUL) certified
1 ft (30 cm) CAT6 500 MHz UTP Network Cable (Blue)
CAD 1.99
Straight-through patch cables are used to connect a PC to a wall outlet or to connect a patch panel to a hub Patch cables are designed to connect various forms of networking hardware. Some typical applications would be to connect network adapters, hubs, patch panels, switches, routers, DSL/Cable modems and other 10/100/1000 BASE-T (IEEE 802.3) applications. These Cat6 patch cables have a moulded, snag-free boot around each connector. Specs: Colour: OrangeConnectors: 2 x RJ45 Male Cable: 4-pair 24 AWG UTP Cat 6 Stranded Copper
1 ft (30 cm) CAT6 500 MHz UTP Network Cable (Green)
CAD 1.99
Straight-through patch cables are used to connect a PC to a wall outlet or to connect a patch panel to a hub Straight-through patch cables are used to connect a PC to a wall outlet or to connect a patch panel to a hub CAT6 network cables transmit at up to 1000 Mbps Compatible with 100 Base / 1000 Base T (gigabit) networks Cable: 24 AWG, 4 pair UTP, CMG, type CM (cUL) certified
1 ft (30 cm) CAT6 500 MHz UTP Network Cable (Grey)
CAD 1.99
Straight-through patch cables are used to connect a PC to a wall outlet or to connect a patch panel to a hub Straight-through patch cables are used to connect a PC to a wall outlet or to connect a patch panel to a hub CAT6 network cables transmit at up to 1000 Mbps Compatible with 100 Base / 1000 Base T (gigabit) networks Cable: 24 AWG, 4 pair UTP, CMG, type CM (cUL) certified
1 ft (30 cm) CAT6 500 MHz UTP Network Cable (Orange)
CAD 1.99
Straight-through patch cables are used to connect a PC to a wall outlet or to connect a patch panel to a hub Patch cables are designed to connect various forms of networking hardware. Some typical applications would be to connect network adapters, hubs, patch panels, switches, routers, DSL/Cable modems and other 10/100/1000 BASE-T (IEEE 802.3) applications. These Cat6 patch cables have a moulded, snag-free boot around each connector. Specs: Colour: OrangeConnectors: 2 x RJ45 Male Cable: 4-pair 24 AWG UTP Cat 6 Stranded Copper
1 ft (30 cm) CAT6 500 MHz UTP Network Cable (Purple)
CAD 1.99
Straight-through patch cables are used to connect a PC to a wall outlet or to connect a patch panel to a hub Straight-through patch cables are used to connect a PC to a wall outlet or to connect a patch panel to a hub CAT6 network cables transmit at up to 1000 Mbps Compatible with 100 Base / 1000 Base T (gigabit) networks Cable: 24 AWG, 4 pair UTP, CMG, type CM (cUL) certified