Mycronic PS3 Power Supply L-019-0022-3
ID: #660290
Description
The Mycronic PS3 Power Supply L-019-0022-3 is a primary machine power supply unit used in Mycronic SMT pick-and-place machines. Here's what's generally known about this part: Mycronic PS3 Power Supply L-019-0022-3 This is a PS3 (Power Supply 3) Edition 3 assembly serving as a core regulated DC power supply unit within the electronics rack of Mycronic MY-series pick-and-place machines. The PS3 provides stable, regulated power to the machine's control electronics, boards, and subsystems, making it one of the most fundamental components in the machine's electrical infrastructure. Key characteristics typically associated with this part: Application: Mycronic MY-series pick-and-place machines (specific compatibility dependent on machine generation and electronics rack configuration) Function: Serves as a primary regulated DC power supply, converting incoming AC mains power to stable, filtered DC voltage rails required by the machine's control electronics; responsibilities typically include: Converting AC input power to regulated DC output voltage rails Providing stable, low-ripple DC power to control boards including MCB, MOT3, MI, PAIB2, and other housed electronics Power sequencing and distribution management across the electronics rack Overcurrent and overvoltage protection for connected electronics Power-good signaling to the machine control system Thermal management of power conversion components EMI filtering of input power to protect sensitive machine electronics Manufacturer: Mycronic (L-prefix indicates a Mycronic assembly-level part number) Part number: L-019-0022-3 (the "-3" suffix denotes Edition 3, indicating a specific hardware revision) Type: Regulated DC power supply unit / PSU assembly Edition: 3 — a specific hardware revision with defined electrical specifications and machine model compatibility; correct edition matching is essential when sourcing a replacement Typical Electrical Characteristics: As a machine control power supply for MY-series equipment, the PS3 would typically provide: Input: AC mains input (100-240V AC, 50/60Hz single phase — typical for industrial electronics) Output Rails: One or more regulated DC voltage rails commonly including: +5V DC — for logic circuits and microcontrollers +12V DC — for fans, interfaces, and peripheral circuits +24V DC — for I/O circuits, solenoid valve drivers, and actuator control ±15V DC — for analog signal conditioning circuits (if applicable) Regulation: Tight output voltage regulation to ensure stable operation of all dependent control electronics Protection: Overcurrent protection (OCP), overvoltage protection (OVP), short circuit protection (SCP), and thermal shutdown
Price
$1170.95
Last Updated
9 August 2026, 21:38 UTC
Store Information
physical store
Location
More from Lewis and Clark
View all
Mycronic Agilis Yellow 12mm 8.5 Feeder Insert L-014-1490
$225.00
The Mycronic Agilis Yellow 12mm 8.5 Feeder Insert (L-014-1490) is a precision SMT feeder component designed for use in Mydata / Mycronic Agilis pick-and-place systems. It is engineered for 12mm tape components with an 8.5 pitch, making it suitable for a wide range of mid-size electronic parts commonly used in SMT assembly. Part of the Agilis intelligent feeder system, this yellow-coded insert ensures accurate electronic indexing, stable tape handling, and consistent component delivery during high-speed production. Its design supports reliable feeding performance while minimizing errors and downtime in high-mix manufacturing environments. Built with durable industrial-grade materials, the feeder insert provides long-term stability, smooth operation, and easy integration into existing Agilis LM1216 magazine setups. Key Features: Designed for 12mm tape components (8.5 pitch yellow configuration) Compatible with Mycronic / Mydata Agilis SMT systems High-precision electronic feeding and indexing Stable and consistent component delivery for SMT placement Color-coded yellow for easy identification Optimized for mid-size SMT components Durable construction for long service life and continuous use A reliable feeder insert that ensures accuracy, efficiency, and smooth production flow in SMT manufacturing environments.
Mycronic Agilis Feeder 16mm Yellow 12.5 L-014-1492
$225.00
The Mycronic Agilis 16mm Yellow Feeder (L-014-1492) is a precision SMT tape feeder designed for reliable and consistent component delivery in Mydata / Mycronic Agilis pick-and-place systems. It is built to handle 16mm tape components with a 12.5mm pitch, ensuring stable feeding performance in high-speed electronics assembly environments. Engineered with the Agilis intelligent feeder platform, this unit offers smooth tape handling, accurate indexing, and quick setup for efficient production changeovers. Its modular and tool-less design allows fast installation while maintaining precise alignment and dependable operation during continuous SMT runs. Ideal for high-volume and high-mix manufacturing, this feeder helps reduce downtime, improve placement accuracy, and maintain consistent production quality. Key Features: Designed for 16mm tape components (12.5 pitch) Yellow Agilis feeder module for Mycronic systems High-precision, stable component feeding Quick, tool-less installation and changeover Compatible with Mydata / Mycronic Agilis platforms Built for continuous, high-speed SMT production Durable industrial-grade construction for long service life A dependable feeder solution that ensures accuracy, efficiency, and productivity in SMT assembly lines.
Mycronic Agilis Feeder 8mm 4.7 Yellow L-014-1319
$220.00
The Mycronic Agilis 8mm 4.7 Yellow Feeder (L-014-1319) is a precision SMT tape feeder designed for stable and accurate component delivery in Mydata / Mycronic Agilis pick-and-place systems. It is optimized for 8mm tape components and commonly used for mid-size parts such as 0805, 1206, and similar packages. Built on Mycronic’s Agilis intelligent feeder platform, this unit provides reliable electronic indexing, fast setup, and smooth tape handling for high-speed SMT production. The yellow 4.7 configuration ensures precise pitch control, helping maintain consistent feeding performance and reducing placement errors during continuous operation. Its modular, tool-less design allows quick changeovers and efficient line setup, making it ideal for both high-mix and high-volume electronics manufacturing environments. Key Features: Designed for 8mm tape components (4.7 yellow configuration) Compatible with Mycronic / Mydata Agilis SMT systems Suitable for mid-size SMT components (e.g., 0805 / 1206 range) High-precision electronic feeding and indexing Quick, tool-less installation and easy changeover Stable performance for continuous high-speed production Durable industrial-grade construction for long service life A dependable feeder solution that ensures accuracy, efficiency, and consistent performance in SMT assembly operations.
Mycronic Agilis LM1216 Magazine L-014-1562
$5150.00
The Mycronic Agilis LM1216 Magazine (L-014-1562) is a high-capacity feeder magazine designed for use in Mydata / Mycronic Agilis SMT pick-and-place systems. It serves as a modular mounting platform for 12mm and 16mm Agilis feeders, allowing efficient organization and handling of multiple tape components within a single production setup. Built for flexible and high-mix manufacturing, the LM1216 magazine supports quick feeder installation and removal, helping reduce setup time and improve line efficiency. It is designed to accommodate various feeder configurations while maintaining stable positioning and reliable operation during continuous SMT production. As part of the Agilis intelligent feeder system, the magazine supports fast changeovers and streamlined workflow, making it ideal for high-volume electronics assembly environments. Its robust industrial construction ensures long-term durability and consistent performance under demanding production conditions. Key Features: Designed for 12mm and 16mm Agilis feeders Compatible with Mycronic / Mydata SMT platforms Modular magazine system for efficient feeder organization Supports high-mix, high-volume production environments Quick feeder loading and changeover capability Stable mechanical design for reliable operation Durable industrial-grade construction for long service life A dependable magazine solution that improves feeder management, productivity, and workflow efficiency in SMT assembly operations.
Mycronic Agilis Stick Pallet ASP-10 L-014-1687
$650.00
The Mycronic Agilis Stick Pallet ASP-10 (L-014-1687) is a precision component carrier designed for use in Mydata / Mycronic Agilis Stick Magazine (ASM) systems. It is used to securely hold electronic components supplied in stick or tube format, enabling stable and automated feeding in SMT pick-and-place production. This ASP-10 pallet is specifically designed for standard 10mm stick components and provides accurate positioning within the Agilis Stick Magazine system. It features individual feeder positions with identification support, allowing traceability and efficient management of components during production. Built for compatibility with the Agilis ASM platform, the pallet supports fast loading and unloading, helping reduce setup time and improve overall SMT line efficiency. Its durable construction ensures long-term reliability and consistent performance in high-volume manufacturing environments. Key Features: Designed for stick/tube-fed SMT components (ASP-10 format) Compatible with Mycronic / Mydata Agilis Stick Magazine systems Precise component positioning for stable feeding Supports individual feeder position identification and traceability Quick loading and unloading for efficient changeovers Durable industrial-grade construction for long service life Optimized for high-mix and high-volume SMT production A reliable stick pallet solution that ensures accuracy, efficiency, and smooth component handling in advanced SMT assembly operations.
Mycronic Agilis Feeder 8mm 4.0 White - L-014-1320
$265.00
The Mycronic Agilis 8mm 4.0 White Feeder (L-014-1320) is a precision tape feeder designed for reliable and consistent component delivery in Mycronic / Mydata Agilis SMT pick-and-place systems. It is specifically engineered for 8mm tape components and supports common mid-size chip parts such as 0402 and 0603 packages. Built with Mycronic’s Agilis intelligent feeder platform, this unit features tool-less installation, automatic feeder recognition, and smooth electronic indexing for high-speed and high-accuracy SMT production. Its white 4.0 configuration is optimized for stable component handling, ensuring precise feed control and minimal downtime during continuous operation. Designed for high-mix and high-volume manufacturing, this feeder delivers dependable performance, fast changeovers, and long-term durability in demanding electronics assembly environments. Key Features: Compatible with 8mm tape components (4.0 white configuration) Designed for Mycronic Agilis / Mydata SMT systems Suitable for small to mid-size components (e.g., 0402 / 0603 range) High-precision electronic feeding for stable placement Quick, tool-less installation and easy changeover Automatic feeder recognition for efficient setup Durable industrial design for continuous SMT production A reliable feeder solution for maintaining speed, accuracy, and efficiency in modern SMT assembly lines.