Hanna Instruments General Purpose Electrode Cleaning Solution, 20ml Pouch
ID: #660709
Description
Clean the liquid junction of your electrodes once a day or at least once a week to prevent clogging and to maintain accuracy Immerse the electrode in the proper cleaning solution for about 5 minutes Standard and types The Cleaning Solution Series ensures maximum efficiency and accuracy of your sensors when used for it's designated application. Cleaning is a fast and effective routine that should be performed on a regular basis as a preventative measure against using a dirty electrode and to ensure that the junction is not clogged. The HI700661P is a cleaning solution made to clean pH electrodes used in agricultural applications. The most common cause for pH measurement inaccuracies is an unclean or improperly cleaned electrode. This is very important to note, because during calibration, the instrument assumes that the electrode is clean and that the standardization curve created during the calibration process will remain a valid reference until the next calibration. pH meters on the market today will allow an offset voltage of approximately ±60 mV. The deviation from 0 mV is not unusual but ideally should be no greater than ±30 mV. The calibration process compensates for the change in offset voltage. If the mV offset continues to deviate and the meter is calibrated with a dirty electrode then inaccurate readings will result. Light block foil packaging Light-tight packet helps to prevent against degradation by UV light One-time use sachet packets Ensures quality and freshness of solution
Price
$2.79
Last Updated
9 August 2026, 21:39 UTC
Store Information
physical store
Location
More from Gardin Hydroponics and Soul
View all
Sun System LEC Inner Sun PGZX Socket Assembly
$19.99
Sun System® LEC® Brand Inner Sun® PGZX Socket Assembly utilizes cutting edge Light Emitting Ceramic® brand technology (ballast required). This unit is ideal for inner canopy and supplemental lighting applications. These sockets come with the patented male lamp receptacle which is compatible with Galaxy® LEC® brand and Sun System® 1 LEC® brand 315 Electronic ballasts. The Inner Sun® has a flexible pigtail strain relief with a ceramic open rated PGZX socket. Comes with a white powder coated junction box. US Patent Pending: 29/542,729. Chinese Patent: ZL2016301246206.
Seabright Sticky Thrip & Leafminer Trap, 5 Pack
$5.99
These 4-inch-by-7-inch Seabright Sticky Traps unfold to expose nontoxic adhesive on both sides to cover approximately 30 square inches per trap. Thrip/leafminer baits are colored blue to attract target insects.
Seabright Laboratories Sticky Aphid Whitefly Traps, 5 pack
$5.99
These 4” x 7” Sticky Aphid/Whitefly Traps unfold to expose adhesive on both sides to cover approximately 30 sq inches per trap. Yellow coloration of weatherproof cards attracts aphids, whiteflies, leafhoppers, froghoppers, moths and more. Nontoxic traps are simple to hang and mess free. Pack of 5 traps.
Can-Filter - 33/66 Flange, 4"
$12.55
Odor-fighting Can-Fan and Filter components are brought together with Can-Filter® Flanges. The Can-Filter Flange is designed to allow flawless connection between the fan and the filter as well as the filter and ducting.
LEC E39 Mogul to PGZX Socket Adapter for CMH
$8.99
The LEC® Brand E39 mogul to PGZX socket adapter is for CMH (ceramic metal halide). It allows an existing single-ended reflector with standard mogul socket to retrofit to the new LEC® Brand technology, when used with a proper Galaxy® LEC® brand and Sun System® 1 LEC® brand remote electronic ballast.
HydroFarm Receptacle Adapter, Brand S
$4.99
Adapter that connects Hydrofarm ballast with a "Brand S" reflector unit. Solves the problem of not being able to use Hydrofarm ballasts and "Brand S" reflectors in combination due to incompatible plugs.