Centurion 2K Polyurethane Topcoat 2800 Series
ID: #593131
Description
Centurion 2k polyurethane topcoat and sealer is the most versatile water based coating currently available today. This 2K poly has excellent chemical, moisture, and UV resistance along with superior protection against scuffing. 2k paint is designed for cabinets, furniture, hardwood floors, cabinetry, and millwork. This product is available in clear, white, and custom tinted colors from Benjamin Moore, Sherwin Williams, Behr, and more! All colors tint with Centurion's recommended industrial colorants for the best possible performance and coverage. Custom colors are always accurately matched to a 0.5 Delta E or less. If you are ordering a color the same job, you must include the HM number on the top of the can. We match to current manufacturer color chips or fan decks. Paint manufacturer color swatches vary. Always ensure the color is accurate before proceeding with a full scale application. Centurion is not currently manufacturing neutral tint bases in Semi-Gloss or Gloss. If you have a dark color, choose Flat or Satin. Technical sheen information: Flat - 10-15 sheen (recommended - the most popular among refinishers and new construction. It is a low sheen satin). Satin - 30-35 sheen (a high sheen satin. This satin is more shiny than a typical trim paint satin, and much more shiny than a wall paint satin finish.) Semi-Gloss - 50-55 sheen (Not recommended. This product is a true semi-gloss. Only choose this sheen if you are looking for a very shiny appearance) Gloss - 70-75 sheen Features: Dries fast Excellent sandability Extreme durability (when catalyzed at 10% by weight) Can be mixed with CW-4002 Hardener at a maximum of 10% by weight. This will give you a 2 hour pot life. See below for recommended amounts by volume. Note: CIC’s data sheets are currently incorrect and this is the most up to date information. Compatible with water based thickener to add hang and viscosity. Add 0.5 - 1 fl. oz per gallon and thoroughly drill mix for 3-4 minutes. Wait 1-24 hours for the viscosity to increase. Thickener should not be needed with dark colors, or if you’re using the recommended amount of hardener. Thickener is only recommended for brush/roll, airless, or AAA applications, it should not be added for HVLP/cup gun application. Recommended maximum catalyst amount by volume: White base colors: 14% by volume (roughly 17.50 fl oz per gallon). Deep base colors (DBC): 12% by volume Clear base colors (TB): 11% by volume Clear: 11% by volume At the recommended 10% by weight pot life is 2 hours. Airless Tip Recommendation: TriTech fine finish 308 or 408 or Graco FF 308 or 408 — 208 or 210 tips are not recommended and will cause you to over-apply. Scroll down for more airless recommendations. AAA Tip Recommendation: Sagola 09/60 or 09/40 Spray application methods: conventional, airless, air assisted airless, HVLP, HVLP turbine. Brush/Roll: add 0.5-1 fl oz. of thickener and 2% 9001 retarder . Use a soft bristle nylon/polyester blend brush and a thin nap mohair, synthetic mohair, or microfiber roller. Do not overwork. If the product is drying too fast, add slightly more retarder. HVLP Turbine: (minimum 5 stage turbine with tinted colors - 4 stage for clear). For HVLP application a 1.8 or 2.0 needle is recommended. 5%+ reduction with medium retarder may be necessary. Cheap box store HVLP sprayers are not recommended with Centurion products. Our recommendation for a DIY is an inexpensive Graco DIY sprayer like a Graco X5. Airless: 308 or 408 spray tip. Use a 3/16” x 25’ hose. Smaller or larger hoses can cause issues. Hose whips are not recommended, but can be used. Use a coarse or medium mesh filter in your pump and in your gun. 50-100 mesh in the gun and 20-50 mesh in the pump is ideal. Diaphragm pumps like the ED655 or Elite 2000/3000 will shorten the pot life of catalyzed coatings. Expect the pot life to drop in half. TB and DBC base colors are thicker than white base colors. More medium retarder may be necessary for these colors with HVLP. 3% medium retarder may be necessary for Graco Quickshot users. Recommended Primers: New wood: 1108 or 1111 (1K or 2K) Refinish: 1111 (2K with 5% catalyst) or 1123 (1K) or 1107 (2K with 10% catalyst - where extreme moisture resistance and adhesion is needed.) Clear: 2001 sanding sealer Pontiac Paint Supply has 90+ combined years in the paint and coatings industry , and specializes in color matching. If your job requires multiple gallons, box/mix together like colors to ensure color consistency. It is also highly recommended to order enough for your job! If you are reordering, be sure to include the HM number found on the lid next to the color name and number. For a custom color select the sheen, choose the color brand, and then input the color name and/or color number. Note: If you select a custom color, your order may not ship the same day. Custom color order shipping information is posted at the top of every page Monday - Friday. If you need something quickly, please contact us to get an ETA, or quote for overnight shipping. If you have any questions, please call us at 855-672-0422 or start a live chat session by clicking the icon on the bottom right of any page.
Price
$105.77
Last Updated
9 August 2026, 17:10 UTC
Store Information
physical store
Location
More from The Paint Store
View all
Insl-x Aqua Lock Plus Primer AQ-0400
$14.82
Aqua Lock Plus is a multipurpose, 100% acrylic, water-based primer/sealer for outstanding everyday stain blocking on a variety of surfaces. It adheres to interior and exterior surfaces and can be top-coated with latex or oil-based coatings. Features: Outstanding sealing properties Smooth base for latex or oil topcoats Provides a mold-resistant coating Low VOC Dries Quickly – recoat in one hour Prevents stains from bleeding through finish coat Good adhesion to glossy Surfaces Can be used under wallcoverings Available Colors: White, Black and Deep Tint Base Cleanup: Warm soapy water Resin Type: 100% Acrylic Recommended Use: Interior or Exterior VOC Level: Low VOC - less than 50 g/L This product can be tinted upon request.
Insl X Stix Bonding Primer
$19.50
Insl X Stix is a premium urethane acrylic bonding primer and sealer. Stix has unparalleled adhesion and will stick to the most challenging surfaces. Stix is a great bonding primer for PVC, vinyl, plastic, glass, glossy tile, glazed block, glossy paint, pre coated siding, fiberglass, and galvanized metals. Stix is made by Benjamin Moore. It's a great bonding primer for refinishing previously stained or painted cabinets. This primer can be tinted upon request. Features: Bonds to "hard-to-coat" surfaces Can be applied in temperature as low as 35F. Cures to an extremely hard film Excellent enamel holdout Can be top coated with almost any product Low odor Available Colors: White (can be tinted to a medium gray) Cleanup: Warm soapy water Resin Type: Acrylic Urethane Recommended Use: Interior or exterior VOC Level: Low VOC - Less than 50 g/L
TriTech T93R Reversible Airless Spray Tip
$38.22
These airless paint sprayer tips are made with tungsten carbide formulated, and manufactured by TriTech that have a hardness of 93. This means the tip will last longer and spray better. Features: A patented seal alignment system for fast installation Ultra hard tungsten carbide for long life A loop to hang or attach unused tips to a keyring Rated up to 5000 PSI Reversible These spray tips fit the Graco RAC V tip guard, but not the RAC X. If you're unsure if your current tip/safety guard will fit TriTech tip guards are available for purchase here. Also available from TriTech are Ultra Fine Finish spray tips and Wide Fan spray tips. All sizes shown are in stock and ready to ship with free expedited shipping!
TriTech Fine Finish Spray Tips
$48.80
TriTech fine finish spray tips are the highest quality, and longest lasting fine finish tips on the market. These spray tips have exclusive features like the double orifice that atomizes the paint twice. Free express 2 day shipping on all fine finish gold tip orders! TriTech manufactures their own tungsten carbide in house with a Rockwell Hardness of 93, a diamond’s hardness is 100. This material is used in every TriTech T93R Fine Finish spray tip and is why these spray tips outlast the competition. We now have a tip and guard combo available in 208, 210, 308, and 310 sizes. This price includes free 2 day shipping! Features: Seal alignment system to ensure the tip is installed quickly and correctly Manufactured with incredibly hard tungsten carbide for extreme durability The tip size is debossed into the handle so you can easily view the size A loop to add to a keyring These spray tips may fit your existing tip guard. They fit the Graco RAC V tip guard, and Titan tip guard, but do not fit the larger Graco RAC X tip guard that hold green FFLP tips. If you're unsure if the tip will fit your guard, you can purchase a TriTech Tip Guard that will fit on any spray gun that has the common 7/8" thread. If you're spraying clear coats, or WB coatings like Centurion , Novalk , Envirolak , or Renner, the most popular sizes are: For topcoats: 306 , 406, (Centurion 400 & thinner viscosity clears) 308, 408 (for most 1K/2K topcoats & thixo products). For primers: 308, 408, 310, or 410. When spraying with 06 tips it is recommended that you strain your material with a fine mesh filter before spraying. 06 spray tips are not recommended with the Graco Quickshot, box store Graco airless sprayers, or for use with trim paints like Emerald Urethane. Highly thixotropic products like Novalk 932, Renner 765 or ICRO 5000 will also struggle with an 06 tip. We recommend a 308 for thixo products. Tip sizing: the first number is the fan size in inches. It is multiplied by 2 and is approximate. For example, a 308 has roughly a 6 inch fan, and a 0.008 inch orifice size. All 06, and 08 tips are not recommended for use with a Graco Quickshot.
TriTech T360 Airless Spray Gun
$243.59
TriTech T360 is a high quality spray gun with many beneficial features that will prove itself to you with every trigger pull. The T360 has a lightweight and balanced handle, comfortable trigger and an intelligently designed valve-stem. This paint spray gun is designed for professional who insist on quality. Rated for a max pressure of 3600 PSI. Included with this spray gun is one contractor T93R spray tip and one tip guard . Features: Shut-off valve spring is located outside the fluid passages for reduced friction and longer service life. Large-sized fluid passages and a streamlined valve stem offer less restriction and improved flow. Easy access to the filter for cleaning or replacement. Three different mesh sizes are available. Get it fast! This item ships free via a 1-2 day expedited service. The trigger type can be easily changed upon request at no extra charge.
TriTech T420 Airless Spray Gun
$392.14
TriTech T420 Spray Gun is designed to work under higher pressure than the competition for a broader range of applications. The aluminum alloy handle, stainless steel and tungsten carbide valve assembly and hose swivel are all precision machined for reliable performance, day in and day out. Rated for a max pressure of 4200PSI. No Adjustments - Calibrated Spring and Valve Stem The entire valve stem assembly never needs adjustments - even when you rebuild it. The trigger spring is located outside the fluid passages and calibrated to provide the least resistance while assuring a postive shut-off. Large Fluid Passages Over-sized fluid passages and a stream-lined valve stem offer less restriction and improved flow. Easy Filter Access The filter is easily removed from the handle by simply unscrewing the swivel from the handle. Nothing else needs to be taken apart. This item ships free!