HP-10 Foxtail Convertible Plane

$89.00

In Stock The MT-1&MT-2 are the versatile layout tools in your shop. Combining the capabilities of a sliding T-bevel, saddle square, marking gauge, and multiple dovetail cutouts, they will prove themselves invaluable to you in the shop.

$12.90

Small enough to carry around in your apron pocket, the Mini Miter Square is used to measure 90° and 45° bevel angles. It has an angular accuracy of ±0.04° and is just the tool for squaring the inside of boxes and drawers during assembly. Small size and easy to carry The Mini Miter Square measures 2”x2”x1/4”((51x51x6.5mm)), making it convenient to carry around with you in your pocket and handy for your projects. Adjustable sliding foot makes measuring easy The Mini Miter Square has an adjustable sliding foot, which is connected to the base with 3 magnets and can be set for right or left handed marking in layout work. The square is ideal for checking squareness in confined spaces by placing the edge of the foot against the workpiece allowing for easy measurement or marking. Miter angles can be checked in both directions by flushing the square up the edges of the stock using the foot. Finely ground and anodized aircraft grade aluminum alloy The pocket square is made of aircraft grade aluminum alloy. After precision grinding, the surface is anodized. The foot is made of high quality steel, which has high hardness, anti-friction and rust-proof performance. The surface also has a matte finishing. Accuracy The measuring clearance is less than 0.03mm.

$929.00

In Stock What is the Jointmaker Pro? The Jointmaker Pro is nothing more than an adjustable back saw in a frame. Rather than the blade moving forward and backward as is typical with every handsaw in the world, it is held in place and the stock, rigidly attached to linear tables, is moved over the top of the blade. The angle of attack is adjustable based upon either the thickness of the material, the width of the material or the hardness of the material, or any combination of the three. What makes the Jointmaker Pro so unusual is that it is a handsaw that is cutting from the bottom up. PRECISION CUTTING Blade with high quality As the core part, the high quality of the blade is the guarantee of cutting performance. If you were to take the blade and put it in a hand saw, it would work just like a dozuki crosscut pull saw. The blade is one of the finest crosscut saws made on this planet, it is patented and each tooth has four separate grinds with 28 teeth per inch (Crosscut A). Multiple blade types for choice There are four types of blades, Crosscut A (standard part) is the most commonly used blade, whose kerf is as small as 0.4 mm, and will satisfy most cutting requirement. Crosscut B (optional part), is best for the soft woods; Crosscut C (optional part) is a little wider than Crosscut A, this blade was designed for fret wire, but it is also used for cutting dense woods; Rip Blade (optional part) gives an incredible finish when ripping your stock, it can be used for dovetails making. NYLON GEAR The gears are nylon. This is a perfect application for nylon gears. There is no backlash and it is a low-load and low-rpm mechanism. SLIDING STRUCTURE MOVES SMOOTHLY The JMPv2 uses cylindrical guide and linear bearing system (sealed bearing), the accuracy of parallelism of all the parts is high. The system needs no adjustment or lubrication (assembled in factory). The operation is easy with lttle noise, which ensures the smooth cutting experience. Table sliding parallel with blade The parallelism accuracy of the sliding direction of the table, the blade and the guide rail is very high. The straightness accuracy of the cylindrical guide rail is within 0.025 mm. This parallelism accuracy can complete the fine cutting of the miniature stock. A clean and tidy cut can be obtained by this sliding system. Even if you put a small piece of paper by the side of blade on the table, then pushing the fence forward and back, you cannot find any gap between the paper and blade at all. Silent linear bearing, the cutting can be operated by one hand Linear sealed acetyl bearings provide a sliding process with low friction, which avoids the clogging caused by dust getting into bearings. The noise is smaller than power tools. The cutting can be completed by one-hand operation. SIMPLE ADJUSTMENT OF BLADE HEIGHT, ANGLE AND TILTING The blade height and pitch can be easily adjusted via the keel assembly The adjustment mechanism of the keel assembly features gears with minimal backlash, which can not only ensure smooth rotation, but also the accurate setting of the blade height and pitch. The blade can be freely tilted via a trunnion assembly The blade can be tilted via a trunnion assembly up to 45° by left or right side. The four included stops can set the tilt angle quickly for repeat cutting. THE WOODEN FENCE AND JAWS The Fences and Trap Jaws are made of Poplar. The trap jaws can be used to hold the wood stock against fence quickly for cutting accurately. They are consumable items and replacements are available to order or you can make your own. SPECIAL PROCESSING WITH SELECT MATERIAL Anodized aluminium sliding table The sliding tables are made from anodized aluminium, which makes them not only have good anti-friction and high hardness but also the exquisite appearance of matte finishing. High-hardness cylindrical guide bar The cylindrical guide is made of 40Cr steel which is T235 hardened and tempered . After chroming, the surface of the guide bar is bright, good-looking, rust proof and hard. Japanese high quality blade The Blade Teeth are processed with a high-frequency heat treatment, so that they have high hardness and excellent cutting performance, allowing them to achieve fine cutting on various soft and hard wood. APPLICATIONS The Jointmaker Pro v2 is ideal for: ● Box Makers ● Environmentally concerned woodworkers ● Musical Instrument Makers ● Professional Woodworkers ● Architectural Model Makers ● Special Effects Studios ● Toy Makers ● Picture Framers Schools ● Furniture Makers ● Artists ● Parquetry ● Hobbyists ● Model Railroad Set Builders ● Doll house makers ● Model Makers.... THE ONLY LIMIT IS ONE'S IMAGINATION!

$179.00

Ergonomic Design In the workshop, human is united with machines. While pushing the sliding table, the operator have to bend the waist causing much core fatigue. To avoid the core fatigue, we designed this stand on the basis of ergonomics. Tilting Design The stand provides an approx. 7.7° for the table to adapt to the push of the arm. This ergonomical tilting design can save energy while the arms easily completing the cutting in the extension zone. Adjustable Height The height of stand is suggested being adjusted as same high as the hips, which can comfort the shoulder and arm while operating. Ergonomically, the shoulder can be relaxed naturally by above suggested adjustment, which may make long work sessions more comfortable. Material Quality The Stand is made of 14 gauge steel that is powder coated, which is wear resistant, anti-corrosion and of high hardness.

$49.00

Precision Fence Pivot Clamp HOW IMPORTANT IS WORK HOLDING? It is the most important aspect for repeatable results. Because the saw is cutting from the bottom up, you are fighting negative feed-this is the tendency of the board to move upward resisting the cut. This upward tendency needs to be completely eliminated with proper work holding. It is particularly critical when the blade is tilted. If the stock move upward while the blade is tilted, you will almost always jam your stock on the blade, which is not good. DESCRIPTION Use this pivoting hold-down clamp to secure work to the table surface of your JMPv2. Tightening the knob applies pressure to both clamp pads, simultaneously locking both the work and the clamp into position. The pivoting action and swiveling clamp pads provides the flexibility to hold a variety of workpieces- even non-flat pieces -in a wide range of positions. lts MBx 130 hex head bolt slips through a table slot and can be positioned anywhere along the slot. MATERIAL QUALITY It is made of anodized aluminum, so that it is of high strength, wear resistance and rust-proof.

$59.00

Precision Fence Elbow Clamp HOW IMPORTANT IS WORK HOLDING? It is the most important aspect for repeatable results. Because the saw is cutting from the bottom up, you are fighting negative feed-this is the tendency of the board to move upward resisting the cut. This upward tendency needs to be completely eliminated with proper work holding. It is particularly critical when the blade is tilted. If the stock move upward while the blade is tilted, you will almost always jam your stock on the blade, which is not good. DESCRIPTION The Elbow Clamp can be angled in 20° positive -locking increments to apply clamping force exactly where it's needed. This wide range of adjustability makes it extremely versatile for securing either flat or angled/irregular work pieces. Its reach is extendable along its slotted arm, and it can also pivot side-to-side. It attaches to one of two locations along the top of the Precision Fence and lets you use both the fence and the table surface as references to hold the work piece. MATERIAL QUALITY It is made of anodized aluminum, so that it is of high strength, wear resistance and rust-proof.