Bridge City Tool Works

$89.00

In Stock The MT-1&MT-2 are the versatile layout tools in your shop. Combining the capabilities of a sliding T-bevel, saddle square, marking gauge, and multiple dovetail cutouts, they will prove themselves invaluable to you in the shop.

$12.90

Small enough to carry around in your apron pocket, the Mini Miter Square is used to measure 90° and 45° bevel angles. It has an angular accuracy of ±0.04° and is just the tool for squaring the inside of boxes and drawers during assembly. Small size and easy to carry The Mini Miter Square measures 2”x2”x1/4”((51x51x6.5mm)), making it convenient to carry around with you in your pocket and handy for your projects. Adjustable sliding foot makes measuring easy The Mini Miter Square has an adjustable sliding foot, which is connected to the base with 3 magnets and can be set for right or left handed marking in layout work. The square is ideal for checking squareness in confined spaces by placing the edge of the foot against the workpiece allowing for easy measurement or marking. Miter angles can be checked in both directions by flushing the square up the edges of the stock using the foot. Finely ground and anodized aircraft grade aluminum alloy The pocket square is made of aircraft grade aluminum alloy. After precision grinding, the surface is anodized. The foot is made of high quality steel, which has high hardness, anti-friction and rust-proof performance. The surface also has a matte finishing. Accuracy The measuring clearance is less than 0.03mm.

$929.00

In Stock What is the Jointmaker Pro? The Jointmaker Pro is nothing more than an adjustable back saw in a frame. Rather than the blade moving forward and backward as is typical with every handsaw in the world, it is held in place and the stock, rigidly attached to linear tables, is moved over the top of the blade. The angle of attack is adjustable based upon either the thickness of the material, the width of the material or the hardness of the material, or any combination of the three. What makes the Jointmaker Pro so unusual is that it is a handsaw that is cutting from the bottom up. PRECISION CUTTING Blade with high quality As the core part, the high quality of the blade is the guarantee of cutting performance. If you were to take the blade and put it in a hand saw, it would work just like a dozuki crosscut pull saw. The blade is one of the finest crosscut saws made on this planet, it is patented and each tooth has four separate grinds with 28 teeth per inch (Crosscut A). Multiple blade types for choice There are four types of blades, Crosscut A (standard part) is the most commonly used blade, whose kerf is as small as 0.4 mm, and will satisfy most cutting requirement. Crosscut B (optional part), is best for the soft woods; Crosscut C (optional part) is a little wider than Crosscut A, this blade was designed for fret wire, but it is also used for cutting dense woods; Rip Blade (optional part) gives an incredible finish when ripping your stock, it can be used for dovetails making. NYLON GEAR The gears are nylon. This is a perfect application for nylon gears. There is no backlash and it is a low-load and low-rpm mechanism. SLIDING STRUCTURE MOVES SMOOTHLY The JMPv2 uses cylindrical guide and linear bearing system (sealed bearing), the accuracy of parallelism of all the parts is high. The system needs no adjustment or lubrication (assembled in factory). The operation is easy with lttle noise, which ensures the smooth cutting experience. Table sliding parallel with blade The parallelism accuracy of the sliding direction of the table, the blade and the guide rail is very high. The straightness accuracy of the cylindrical guide rail is within 0.025 mm. This parallelism accuracy can complete the fine cutting of the miniature stock. A clean and tidy cut can be obtained by this sliding system. Even if you put a small piece of paper by the side of blade on the table, then pushing the fence forward and back, you cannot find any gap between the paper and blade at all. Silent linear bearing, the cutting can be operated by one hand Linear sealed acetyl bearings provide a sliding process with low friction, which avoids the clogging caused by dust getting into bearings. The noise is smaller than power tools. The cutting can be completed by one-hand operation. SIMPLE ADJUSTMENT OF BLADE HEIGHT, ANGLE AND TILTING The blade height and pitch can be easily adjusted via the keel assembly The adjustment mechanism of the keel assembly features gears with minimal backlash, which can not only ensure smooth rotation, but also the accurate setting of the blade height and pitch. The blade can be freely tilted via a trunnion assembly The blade can be tilted via a trunnion assembly up to 45° by left or right side. The four included stops can set the tilt angle quickly for repeat cutting. THE WOODEN FENCE AND JAWS The Fences and Trap Jaws are made of Poplar. The trap jaws can be used to hold the wood stock against fence quickly for cutting accurately. They are consumable items and replacements are available to order or you can make your own. SPECIAL PROCESSING WITH SELECT MATERIAL Anodized aluminium sliding table The sliding tables are made from anodized aluminium, which makes them not only have good anti-friction and high hardness but also the exquisite appearance of matte finishing. High-hardness cylindrical guide bar The cylindrical guide is made of 40Cr steel which is T235 hardened and tempered . After chroming, the surface of the guide bar is bright, good-looking, rust proof and hard. Japanese high quality blade The Blade Teeth are processed with a high-frequency heat treatment, so that they have high hardness and excellent cutting performance, allowing them to achieve fine cutting on various soft and hard wood. APPLICATIONS The Jointmaker Pro v2 is ideal for: ● Box Makers ● Environmentally concerned woodworkers ● Musical Instrument Makers ● Professional Woodworkers ● Architectural Model Makers ● Special Effects Studios ● Toy Makers ● Picture Framers Schools ● Furniture Makers ● Artists ● Parquetry ● Hobbyists ● Model Railroad Set Builders ● Doll house makers ● Model Makers.... THE ONLY LIMIT IS ONE'S IMAGINATION!

$179.00

Ergonomic Design In the workshop, human is united with machines. While pushing the sliding table, the operator have to bend the waist causing much core fatigue. To avoid the core fatigue, we designed this stand on the basis of ergonomics. Tilting Design The stand provides an approx. 7.7° for the table to adapt to the push of the arm. This ergonomical tilting design can save energy while the arms easily completing the cutting in the extension zone. Adjustable Height The height of stand is suggested being adjusted as same high as the hips, which can comfort the shoulder and arm while operating. Ergonomically, the shoulder can be relaxed naturally by above suggested adjustment, which may make long work sessions more comfortable. Material Quality The Stand is made of 14 gauge steel that is powder coated, which is wear resistant, anti-corrosion and of high hardness.

$49.00

Precision Fence Pivot Clamp HOW IMPORTANT IS WORK HOLDING? It is the most important aspect for repeatable results. Because the saw is cutting from the bottom up, you are fighting negative feed-this is the tendency of the board to move upward resisting the cut. This upward tendency needs to be completely eliminated with proper work holding. It is particularly critical when the blade is tilted. If the stock move upward while the blade is tilted, you will almost always jam your stock on the blade, which is not good. DESCRIPTION Use this pivoting hold-down clamp to secure work to the table surface of your JMPv2. Tightening the knob applies pressure to both clamp pads, simultaneously locking both the work and the clamp into position. The pivoting action and swiveling clamp pads provides the flexibility to hold a variety of workpieces- even non-flat pieces -in a wide range of positions. lts MBx 130 hex head bolt slips through a table slot and can be positioned anywhere along the slot. MATERIAL QUALITY It is made of anodized aluminum, so that it is of high strength, wear resistance and rust-proof.

$59.00

Precision Fence Elbow Clamp HOW IMPORTANT IS WORK HOLDING? It is the most important aspect for repeatable results. Because the saw is cutting from the bottom up, you are fighting negative feed-this is the tendency of the board to move upward resisting the cut. This upward tendency needs to be completely eliminated with proper work holding. It is particularly critical when the blade is tilted. If the stock move upward while the blade is tilted, you will almost always jam your stock on the blade, which is not good. DESCRIPTION The Elbow Clamp can be angled in 20° positive -locking increments to apply clamping force exactly where it's needed. This wide range of adjustability makes it extremely versatile for securing either flat or angled/irregular work pieces. Its reach is extendable along its slotted arm, and it can also pivot side-to-side. It attaches to one of two locations along the top of the Precision Fence and lets you use both the fence and the table surface as references to hold the work piece. MATERIAL QUALITY It is made of anodized aluminum, so that it is of high strength, wear resistance and rust-proof.

$119.00

In Stock Precision Fence Tenon Miter Jig HOW IMPORTANT IS WORK HOLDING? It is the most important aspect for repeatable results. Because the saw is cutting from the bottom up, you are fighting negative feed-this is the tendency of the board to move upward resisting the cut. This upward tendency needs to be completely eliminated with proper work holding. It is particularly critical when the blade is tilted. If the stock move upward while the blade is tilted, you will almost always jam your stock on the blade, which is not good. DESCRIPTION The capabilities of the Precision Fence System really grow with the available accessories, the most important of which is the Tenon Miter Jig.The Tenon Miter Jig mounts to the Jointmaker Pro Precision Fence, allowing you to cut tenon cheeks and miters quickly and accurately. Since it mounts to the Precision Fence, you get the benefit of the fence's micro-adjustment feature to fine-tune your settings. The main fence of the jig tilts 0° (horizontal) to 90° (vertical), meaning you can cut many miters, at any angle, without tilting the blade. You can even cut compound bevels by tilting both the fence and the stock. The included friction-lock C-clamp holds stock up to 2" square firmly against the fence, ensuring accuracy. MATERIAL QUALITY It is made of anodized aluminum, so that it is of high strength, wear resistance and rust proof.

$59.00

Precision Fence Bias Arm HOW IMPORTANT IS WORK HOLDING? It is the most important aspect for repeatable results. Because the saw is cutting from the bottom up, you are fighting negative feed-this is the tendency of the board to move upward resisting the cut. This upward tendency needs to be completely eliminated with proper work holding. It is particularly critical when the blade is tilted. If the stock move upward while the blade is tilted, you will almost always jam your stock on the blade, which is not good. DESCRIPTION It comes with a "V" groove clamp pad that screws on to the integral "C" clamp (not included) allowing you to clamp directly onto the corner of the stock without damaging the corner. This unique arm fastens to the Tenon/Miter Protractor Plate (not included) and allows you to clamp square stock at a 45 degree bias to the blade which creates some very interesting detail cuts as well as some interesting joinery options. It must be used in conjunction with the Tenon Miter Jig and the Precision Fence System. MATERIAL QUALITY It is made of anodized aluminum, so that it is of high strength, wear resistance and rust- proof.

$349.00

In Stock Chopstick Master---Master Your Happiness CSMv1 Chopstick Master Gen.1, a unique tabletop tool, Chopstick Master allows anybody, regardless of experience, age 8 and up, to make a pair of gallery-quality Chinese chopsticks and Japanese chopsticks. This original design utilizes a Japanese blade to form the finials on the end of the Chopsticks. John, who has been designing woodworking tools for over 30 years, wants to design a tool that could be used without any prior knowledge of woodworking, so that everyone, including children, would be able to enjoy the simple pleasure of making something by hand. In creating such a tool, he would first need to create a project that everyone would enjoy making, be simple to understand and easy to use. After a long period of research, John found that chopstick is the one. For China, the world's most populous country chopsticks are both daily and culturally object. Suppose that people can make a pair of chopsticks used by themselves. That would be an exciting and meaningful matter. As a result, John carefully designed the "Chopstick Master" tool. Experience the happiness of becoming a crafts man with the Chopstick Master Even if you’re a busy professional, you can take 10 minutes to make a pair of personal chopsticks by yourself; If you’re an artist, enjoy every minute of the innovative process, to create a pair of chopsticks you like; If you have never tried woodworking, and are looking for a simple and easy project designed for all ages, including the elderly and children, you can make a pair of classic chopsticks with the Chopstick Master™. Teaching you how to make chopsticks in six steps Making Chopstick Master is not only easy, but making a pair of chopsticks is done in only 6 steps. 01—Mark four sides the chopsticks with number To make the four bevels of chopsticks, mark “1 / 2 / 3 / 4" at the end of each side of the chopstick blanks for tracking the making of each bevel. 02—Choose the type of chopsticks you want to make With the Chopstick Master you can make Chinese chopsticks and Japanese chopsticks, when making Chinese chopsticks, select the red arm; when making Japanese chopsticks, select green arm. (The diameter of tip end of Chinese chopsticks is 5mm, the diameter of tip end of Japanese chopsticks is 2mm.) 03—— Make four sides of chopsticks If you want to make a pair of Chinese chopsticks, first set both adjustment knobs to “1”, and install the face of the chopstick that you marked “1” into the chopstick jig on a diagonal resting it against the pin near the front of the jig and against the back of the red arm. Fix the wedges on both sides of the chopstick until the chopstick is firmly secured. Use the block plane to cut the chopstick. The plane automatically stops cutting the chopstick at the correct thickness. Repeat the same process on the chopstick face marked “2”. Rotate the chopstick to the face that is marked “3”, adjust the knobs to “2”, and fix the wedges until the chopstick is secure and use the block plane to cut the chopstick. Repeat the process for the chopstick face marked “4”. (When making Japanese chopsticks, place the green arm in the chopstick master jig and turn the adjustment knobs to “2” when cutting faces 1 and 2 and then turn the adjustment knobs to “3” when cutting faces 3 and 4. The tip of the chopstick will be thinner at 2mm.) 04——Shaping the Octagon Tip Keep both adjustment knobs set to “2”, (Japanese chopstick is “3”). Place one corner edge of the chopstick blank in the “V” groove located in the arm. The narrow end of the chopstick should still be against the stop at the far end of the arm. Hold the plane in your favorite hand and with the opposite thumb push the blank into the stop at the end of the arm. Plane the corner of the blank that is facing up until the plane quits cutting. You will only need to plane the far one-half to one-third of the length of the chopstick. Repeat for the other 3 edge corners. When complete, you should have a perfectly shaped octagon on the tip of each blank. 05——Making the Pyramidal Finial For the Chopstick Master 1 attach the sliding table to the Chopstick Master body. It should slide smoothly without any slop. Insert the saw blade between the body and the blade clamp, with the narrow end of the blade closest to the orange bench hook and the teeth pointing upward. Place the chopstick on the sliding table transversely. Place your right thumb in the indent at the rear of the sliding table, and use your right index and middle fingers to firmly hold the chopstick down. With your hand firmly in place, push the sliding table forward using 90% of the blade being careful to not to push the chopstick all the way off of the blade. Rotate the chopstick 90° and make sure it is against the stop and make the second cut. Repeat for the 3rd and 4th cuts. The result should be a perfect pyramidal fifinial at the end of each chopstick. 06——Sanding, oiling and resting Your chopsticks are almost done now. If there are corners that feel sharp, lightly sand with 400 grit sandpaper After sanding, you can use oil to handle the surface, then set aside for a few minutes, you can put chopsticks in cloth chopsticks bag to take home for use. *All parts of the tool need to be checked and debugged before and after use, including debugging of block plane, sliding table, sharpening operation, selecting operation position etc., which have simple and detailed operation steps in the product instruction.

$329.00

Chopstick Master---Master Your Happiness CSMv2 Chopstick Master Gen.2, a unique tabletop tool, Chopstick Master allows anybody, regardless of experience, age 8 and up, to make a pair of gallery-quality Chinese chopsticks and Japanese chopsticks. This original design utilizes a Japanese blade to form the finials on the end of the Chopsticks. John, who has been designing woodworking tools for over 30 years, wants to design a tool that could be used without any prior knowledge of woodworking, so that everyone, including children, would be able to enjoy the simple pleasure of making something by hand. In creating such a tool, he would first need to create a project that everyone would enjoy making, be simple to understand and easy to use. After a long period of research, John found that chopstick is the one. For China, the world's most populous country chopsticks are both daily and culturally object. Suppose that people can make a pair of chopsticks used by themselves. That would be an exciting and meaningful matter. As a result, John carefully designed the "Chopstick Master" tool. Experience the happiness of becoming a craftsman with the Chopstick Master Even if you’re a busy professional, you can take 10 minutes to make a pair of personal chopsticks by yourself; If you’re an artist, enjoy every minute of the innovative process, to create a pair of chopsticks you like; If you have never tried woodworking, and are looking for a simple and easy project designed for all ages, including the elderly and children, you can make a pair of classic chopsticks with the Chopstick Master™. Teaching you how to make chopsticks in six steps Making Chopstick Master is not only easy, but making a pair of chopsticks is done in only 6 steps. 01—Mark four sides the chopsticks with number To make the four bevels of chopsticks, mark “1 / 2 / 3 / 4" at the end of each side of the chopstick blanks for tracking the making of each bevel. 02—Choose the type of chopsticks you want to make With the Chopstick Master you can make Chinese chopsticks and Japanese chopsticks, when making Chinese chopsticks, select the red arm; when making Japanese chopsticks, select green arm. (The diameter of tip end of Chinese chopsticks is 5mm, the diameter of tip end of Japanese chopsticks is 2mm.) 03—— Make four sides of chopsticks If you want to make a pair of Chinese chopsticks, first set both adjustment knobs to “1”, and install the face of the chopstick that you marked “1” into the chopstick jig on a diagonal resting it against the pin near the front of the jig and against the back of the red arm. Fix the wedges on both sides of the chopstick until the chopstick is firmly secured. Use the block plane to cut the chopstick. The plane automatically stops cutting the chopstick at the correct thickness. Repeat the same process on the chopstick face marked “2”. Rotate the chopstick to the face that is marked “3”, adjust the knobs to “2”, and fix the wedges until the chopstick is secure and use the block plane to cut the chopstick. Repeat the process for the chopstick face marked “4”. (When making Japanese chopsticks, place the green arm in the chopstick master jig and turn the adjustment knobs to “2” when cutting faces 1 and 2 and then turn the adjustment knobs to “3” when cutting faces 3 and 4. The tip of the chopstick will be thinner at 2mm.) 04——Shaping the Octagon Tip Keep both adjustment knobs set to “2”, (Japanese chopstick is “3”). Place one corner edge of the chopstick blank in the “V” groove located in the arm. The narrow end of the chopstick should still be against the stop at the far end of the arm. Hold the plane in your favorite hand and with the opposite thumb push the blank into the stop at the end of the arm. Plane the corner of the blank that is facing up until the plane quits cutting. You will only need to plane the far one-half to one-third of the length of the chopstick. Repeat for the other 3 edge corners. When complete, you should have a perfectly shaped octagon on the tip of each blank. 05——Making the Pyramidal Finial For the Chopstick Master 1 attach the sliding table to the Chopstick Master body. It should slide smoothly without any slop. Insert the saw blade between the body and the blade clamp, with the narrow end of the blade closest to the orange bench hook and the teeth pointing upward. Place the chopstick on the sliding table transversely. Place your right thumb in the indent at the rear of the sliding table, and use your right index and middle fingers to firmly hold the chopstick down. With your hand firmly in place, push the sliding table forward using 90% of the blade being careful to not to push the chopstick all the way off of the blade. Rotate the chopstick 90° and make sure it is against the stop and make the second cut. Repeat for the 3rd and 4th cuts. The result should be a perfect pyramidal fifinial at the end of each chopstick. 06——Sanding, oiling and resting Your chopsticks are almost done now. If there are corners that feel sharp, lightly sand with 400 grit sandpaper After sanding, you can use oil to handle the surface, then set aside for a few minutes, you can put chopsticks in cloth chopsticks bag to take home for use. *All parts of the tool need to be checked and debugged before and after use, including debugging of block plane, sliding table, sharpening operation, selecting operation position etc., which have simple and detailed operation steps in the product instruction.

$54.99

Chopstick Master Saw Blade (for version 1) This specially designed Chopstick Master ™ Crosscut Saw Blade (made in Japan) allows you to create a perfectly polished pyramidal finial on the end of your chopsticks. If you notice the cuts are no longer smooth, it is time to replace the saw blade. (Please note: This replacement blade is compatible with the original Chopstick Master ™ that was produced in 2015.)

$39.00

HP-8 Plane Iron by Chopstick Master This plane iron fits the HP-8. It is made of A2 tool steel and is ground to a 30° bevel. This is a high-quality, precisely ground plane iron for your HP-8 Mini Block Plane. It is made of A2 tool steel, hardened to 58-62 HRC, and ground with the standard 30° angle. Bridge City Tool Works produces an array of innovative and immaculately crafted hand tools for residential and commercial use and has become recognized worldwide as the source of exquisite tools for woodworkers and collectors since its inception in 1983. Our company goals are concerned primarily with the design and manufacture of tools, based on the premise that craftspeople deserve, and should demand, accuracy and quality craftsmanship in their tools.

$9.99

These two tapered wedges allow you securely hold your blank while using the Chopstick Master™.

$59.00

In Stock 30 Degree Mini Honing Guide The 30 Degree Mini Honing Guide allows you to hone your standard HP-8 Mini Block Plane and/or Chopstick Master Plane irons to precisely 30°. ( NOTE: The plane iron shown in the picture is an optional accessory and is not included.)

$69.00

50 Degree Honing Kit by Bridge City Tool Works The 50° Mini Honing Guide Kit in conjunction with the 30° Honing Guide allows you to hone the special HP-8 Mini Block Plane and/or Chopstick Master Plane irons to precisely 50° for planing highly-figured or reversing grains in your workpiece. Includes 1 Hardened steel iron and 1 honing plate. (Note: The 30° Honing Guide is not included. It is only pictured here to demonstrate the setup for the 50° Honing Kit).

$59.00

In Stock Since ancient times, the mortise and tenon joint has been one of the most classical jointing methods in woodworking. For effificiency and accuracy, the mortise is made before tenon. Also, to avoid a loose fit, the width of kerf and tenon need to be carefully measured and marked by hand, which is complicated and errors can easily occur. Needless to say, a perfect fit is difficult to control. The TM-1 and KM-1 can avoid the above problem. There is no need to comply the making order, also the measurement of kerf, mortise and tenon is unnecessary. What you need to do is position the two sliders, and then the precisely fitted joints can be made in three steps. Three steps for tenon making The TM-1 consists with one block, two sliders and two locking knobs. Once you confirm the mortise, precise tenons can be made in three steps. Step 1 Confirm the width of kerf Confirm the width of the blade kerf by using the distance between orange slider and block. Step 2 Confirm the width of mortise Confirm the width of mortise by putting the protruding parts of the block and the dark slider into the tenon. Step 3 Cutting Cut successively by using the orange slider and the block as a flip stop against the fence to achieve the precise tenon.

$49.00

In Stock John Economaki began designing and hand-making custom furniture in the 1970's, after a brief stint as a woodshop school teacher in Portland, Oregon. After contracting pneumonia as a result of becoming hyper-allergic to wood dust, John switched from making furniture to designing and creating heirloom tools merging functionality with aesthetics. The first tool designed and produced was the Try Square in 1983 simply out of frustration with try squares on the market that weren't square and hence Bridge City Tool Works was established. The try square became the cornerstone of this newly formed company . The Try Square handle is stable and adjustable The handle is comprised of two sections that are mirror images of each other. When fastened together, they create a secure foundation for the stainless-steel blade. Should the try square ever get dropped or become out of square, it can be calibrated by loosening four screws, placing the square against a known 90 Degree Reference and then tightening the four screws once again. The handle is ergonomically designed The hollow design of the handle is easy for the operator to grasp and hold. Avoids deformed corners of the blade when dropped The four blade corners are rounded, which can prevent the damage caused should the square be dropped. Anodized aluminum makes a great matte finish The surface of the try square has a matte finish, which is beautiful and easy to maintain. One side of the handle is dark grey, the other side is silver. The trim inside the handle is orange. Anodized aluminum alloy is rust and wear resistant and provides superior hardness and durability. Special finishing, leaving no fingerprints The finish of the stainless-steel blade is processed with a special PVD coating (Physical Vapor Deposition) which provides a stunning decorative finish with strong corrosion and wear resistance. The surface of the blade can be marked with a pencil, leaving no fingerprints when wiped clean. Laser Etched Graduations of TS-2V2 For the blade of the TS-2v2, it has laser etched graduations (available in metric or imperial) which are easy to read. The metric graduation is 200mm, and the imperial graduation is 8 inches in 32nd. The dual starting ends on the two edges of blade of TS-2v2 provide much convenience for multiple measuring needs. Classic 8:1 Profile for dovetail joints The blade is pierced with an 8:1 profle which can be used for accurate layout of dovetail joints.

$27.99

If you are making your own chopstick blanks from your favorite wood, you will want to store them in our Chopstick Master™ canvas fabric (cotton) sleeves to ensure a lifetime of use.

$29.99

Chopstick Master™ Abrasive Strips These replacement Chopstick Master™ Abrasive Strips (Set of 5) are adhesive-backed and equivalent to an 8000 grit honing stone (1 micron grit size). The Chopstick Master™ allows anybody, regardless of experience, age 8 and up, to make a pair of gallery quality chopsticks. This original design utilizes a Japanese blade to form the finials on the end of the Chopsticks.

$62.00

This is a replacement handle for the JSF Japanese Folding Saws. It will fit the JSF-2 Folding Kataba Saw and the JSF-3 Ryoba Folding Saw. It will not fit the JSF-1 Dozuki Folding Saw due to it not having a spline attached to the saw. Please Note: Blades are not interchangeable with any of our other Japanese saws

$579.00

In Stock Why Chose the JMPv2 Precision Fence System? The incredible cutting ability of the JMPv2 has been greatly expanded with our new Precision Fence System. Available in either imperial or metric versions, this precision fence system has an array of accessories that makes it possible to do things that have yet to be imagined. EXTREMELY ACCURATE ADJUSTABLE STOPS Each fence half has two stop blocks, the black stop is used for rough positioning, the blue one is used for accurate positioning and has a 0.02mm (0.001") fine adjustment. The increment of a full turn of the scale knob is 1mm (0.05"). The increment for each turn of one grid in the scale ring is 0.02mm (0.001"). FLIPPED STOPS WITH VERSATILITY Both fence stop blocks can be flipped up and down or tilted left and right according to the planned cut. The two spacers on the stop blocks can be rotated to touch the pretty short workpiece THE JMPV2 HAS THE INNOVATIVE SEPARATED FENCE The separated fence can be moved according to different requirements, it can also tilt to different angles on the sliding table, which can satisfy various cutting. MULTIPLE CLAMPING AVAILABLE FOR VARIOUS CUTTINGS Multiple clamps can be perfectly mounted on the precision fence, which can meet most cutting demands. SPECIAL PROCESSING WITH SELECTED MATERIAL AND STRICT QUALITY CONTROL The Fence is made of anodized aluminum, so that it is of high strength, wear resistance and rust proof. The panel is made of PE board, which is environmental friendly, durable, and resistant to high temperatures and impacts.

$89.00

A very popular furniture making saw, our Kataba has 20 teeth per inch dispersed over nine inches. Overall length is 21.5". Because this is not a back saw, blade thickness is 0.40mm or sixteen thousandths (0.016") of an inch. The Kataba saw is the tool of choice when you need cuts deeper than possible with a Dozuki. Perfect for tenons and larger dovetails as well as flush cutting and general-purpose sawing needs NOTE: The handle of the Japanese Saw is wrapped in Rattan which is a natural material and therefore may have slight marring or imperfections.

$78.00

JS-6 Crosscut Saw All of the Japanese saws made in Japan for Bridge City feature blades with a golden hue. This color appears during the heat treating process and is normally ground off to reveal the traditional silver color of steel. We insist that it not be ground off so you know the blades are properly tempered. We highly recommend having a replacement blade on hand as most of these saws feature teeth that have up to four facets ground on each tooth making them all but impossible to sharpen by hand. Japanese Saws cut on the pull stroke, and because the blades are under tension during cutting, the blade thickness can be much thinner than European heritage saws. A thinner blade means less material is removed and requires much less effort to use. With a little practice, your cuts will look like they were made with a laser. In soft woods, Japanese Saws cut so efficiently, it is hard to believe it is made by hand. In hard woods, as in all hand sawing operations, let the saw progress at its pace and apply very little downward pressure. Cuts are started at the back of your stock as you pull forward. Aggressive and impatient users will invariably break teeth on these saws which defeats the purpose of owning a precision saw. NOTE: The handle of the Japanese Saw is wrapped in Rattan which is a natural material and therefore may have slight marring or imperfections.

$76.00

With a maximum cutting depth of 2.1", a blade length of approximately nine inches and an overall length of 24", our 28 teeth per inch folding dozuki is an ideal joint cutting back saw. The blade is an astonishing 0.33mm thick which is only 12 thousandths of an inch and creates a kerf of approximately .020” wide. Use it for your best work and when done, fold it in half—the handle becomes a blade guard, and if needed, will fit in your back pocket as a ready assistant. NOTE: The JSF-1 Folding Dozuki Saw does come with a handle.

$29.00

AS-24v3 Magnetic Cursors (Sold separately) As-24v3 cursor is used with the AS-24v3 Adjustable Square to make quick positioning marks on the workpiece. It can be fifixed independently on the ruler for quick marking. It also can be moved/removed freely when not in use. The graduations are laser etched on the beveled surface which will prevent as much parallax as possible. A special groove design helps guide the tip of a pencil to mark reference points quickly and accurately. Made of high strength anodized aluminum and processed with bead-blasting on the surface gives an elegant texture of matte finishing.

$28.99

Replacement Straight Fence for Jointmaker Pro v2

$26.99

Replacement Trap Fence for Jointmaker Pro v2

$49.99

Chopstick Master Blanks & Sleeves Included in Kit 20 Blank Chopsticks (see type of wood availability listed below) and 10 Canvas Sleeves (5 blue sleeves and 5 red sleeves) Kits Available in: Maple, Paduak and Wenge. Maple – A diffuse-porous hardwood that has excellent planing characteristics but reverse grain is not uncommon (you will need to plane some spots pulling the plane towards you to avoid grain tear-out). This is the lightest color of chopstick blanks that we provide. Padauk – A bright red/orange when freshly cut but does mellow over time. This is an open grain hardwood that planes easily and makes an excellent chopstick not only for its hardness but for the beautiful color – red is considered “good luck” in Wenge ( Millettia laurentii ) – Hard and somewhat brittle with a coarse, fibrous structure. An attractive medium brown with lighter grain lines, it becomes almost uniformly black with an oil finish.

$159.00

In Stock JMP Blades The finish is so good that final clean-up work with chisels or planes is not needed. Blades sold in a package of 3. Produced by one of the main Japanese suppliers of this type of high-quality blade specifically for the Jointmaker Pro. Crosscut A Blade: .4mm x 28 tpi; kerf of 0.018; Most commonly used blade Crosscut B Blade: .3mm x 32 tpi; Used with softer woods of smaller dimensions. Crosscut C Blade: .4 mm x 28 tpi; kerf of 0.023” for StewMac Fret Wire. Allows luthiers to cut 0.023” fret slots in a single pass. It has a slightly thicker crosscut blade which may have an appeal for those who are cutting dense woods. Rip Blade: .4mm x 16 tpi; Gives a great finish on rip cuts but periodically cleaning wood fibers that may be embedded in the gullets (with an old toothbrush) may be necessary in between cuts depending on the species of the wood. Useful for cutting tenons and dovetails.

$16.00

Japanese Saw Folding Replacement Blades JSF-1E Folding Dozuki Saw Blade : is an ideal joint cutting back saw blade. Maximum cutting depth of 2.1"; Blade Length: 9"; 28 tpi; kerf .020 JSF-2E Folding Kataba Saw Blade: ideal when you need cuts deeper than possible with a Dozuki. Perfect for Tenons and larger dovetails. Excellent for furniture making. 20 tpi; Blade length: 9"; Blade thickness: 0.46mm JSF-3E Folding Ryoba Saw Blade: Perfect for furniture or cabinetmakers. Crosscut Teeth on one edge and Rip Teeth on the opposite edge. Crosscut Teeth: 15 tpi; Rip Saw Teeth: 8 tpi; Blade Thickness 0.49mm.

$699.00

In Stock Breaking Tradition with Amazing Versatilty! The HP-12 Dual Angle Bench Plane, designed by John Economaki, is unlike any other smoother past or present in the quality, workmanship, and performance. We believe this dedication to quality and performance will rub off in your work. This lightweight plane is one of the most versatile and usable planes and may be the only bench plane you'll ever need! The Ergonomically Designed Front and Rear Totes The rear tote is investment cast 304 stainless steel with the two interior cavities painted black. Shaped to invoke the illusion of movement. The highly polished curved surfaces add a nice reflective contrast to the colors of the plane components. The variable chamfer at the top of the tote ties in nicely with the graceful chamfers of the plane sides. The angle is perpendicular to the iron edge directing the forward motion of the plane straight at the cutting edge. All metal front and rear totes which fit nicely in both small and large hands. The front tote "mushroom" is turned from aluminum, bead blasted and anodized black. This shape is more hand friendly than the more common "balloon" totes and is threaded into the throat plate allowing for precise adjustment of the mouth. Unique Blade Retention Mechanism Simply pull the sculpted "D" lever and the entire blade retention mechanism swings out of the way to facilitate iron removal. It is fast, fun, the pressure is adjustable, and you have never seen anything like it. There are no free parts - the mechanism is integrated into the body. Iron Adjustment Both cutting depth and cant (iron angle) can be adjusted by the lead screw under the lever easily and precisely. Cutting Depth Adjustment The iron is engaged to the depth adjuster via a pin nut attached to a 0.5mm thread pitch lead screw. One full revolution of the lead screw increases the depth of cut by 0.1mm (0.004"). The lead screw is housed in a split pivot nut turned from solid brass and the result is a backlash free mechanism that is field adjustable by hand. This mechanism is as smooth as butter in use. Iron Cant Adjustment Iron canting can be achieved by shifting the lead screw side to side but in practice this is not as preferable, or as fast, as canting with the fingers through the sides of the plane body. Dual Ground lrons The robust irons (0.225"/5.7 mm thick) are a full two inches wide (50.8 mm) and hardened to Rc 60-62 from A2 tool steel. They are lapped to a mirror finish--no flattening required. The HP-12 Dual Angle Bench Plane comes with two irons with four unique purposes. The available grinds eliminate the need for multiple planes. This plane, with these attack angle choices, may be the only bench plane you will ever use or need. The attack angle of 42 degrees is used for low angle work. The attack angle of 47 degrees is used for standard work. The attack angle of 60 degrees is used for woods you like to swear at. Lastly, there is a scrub iron grind. It is included and designed to be used for quick cross grain flattening of wavy or difficult grained stock. Blade Guard When bedded, the non-business edge is protected with an aluminum blade guard which is mandatory when sharpening to avoid injury. The guard attaches to the iron with rare earth magnets. Ability to Add Depth Skids The single distinguishing feature of the HP-12 over any other plane made today is the ability to add depth skids; essentially turning your plane into a 2" thickness planer. The ability to thickness plane to a precise thickness is an incredible benefit for box makers, for making louvers, models, musical instrument makers, inlay strips...tc. The skids feature rounded soles which not only reduce friction but allow you to set them at different depths for creating accurate tapered stock (louvers) without having to sand. Either straight or tapered, you cut until the plane no longer makes a shaving-it is fun and the accuracy is amazing. It is entirely possible, and easy, to make multiple components with a thickness that does not vary more than 0.002" (0.05mm)!

$479.00

In Stock A Typical Tool Making Art by John Economaki Tool making as an art has never been more obvious than the form and function of the HP-9v2 Dual Angle Block Plane. This beautifully crafted, dual-angle block plane has several distinguishing features making it one of the most interesting products in our history of tool making. Harmonious Designs By eliminating the traditional cross pin found in most antique and contemporary metal bodied planes, we were able to design the body to fit hands of all sizes. The matching of components' multiple colors will present you an enjoyment of aesthetics. The plane sides have been "skeletonized". The solid, stainless steel investment cast rear tote fits palms perfectly, creating a harmonious design that differs greatly in appearance from the traditional block planes based upon early European designs. The Four-Linkage Mechanism for Blade Tension The blade tension is achieved with a four-linkage mechanism. Moving the cap downward until it snaps will tighten the blade. The components of this Four-Linkage Mechanism are CNC machined from solid aluminum and anodized to achieve the extraordinary finish. Iron Adjustment Both cutting depth and iron angle can be adjusted by the lead screw easily and precisely. The backlash of the lead screw is minimized by adjusting the two screw knobs located in the top of the brass lead screw pivot. Rotate the screw knobs to tighten the brass lead screw pivot to eliminate the possibility of the lead screw shifting backward. Depth of Cut Precise to 0.01mm (0.0004") Increment The blade is adjusted with a modified Norris mechanism allowing for extremely fine blade advancement. The lead screw has 20 threads in 10mm. One full revolution clockwise will increase the depth of cut by 0.1mm (0.004"). There are five semi-circular cuts milled around the lead screw knob, which achieves incredibly small incremental adjustments. Rotating one knurled section to one of the semi-circular cuts next to it will increase/decrease the cut depth by 0.01mm (0.0004"). The Blade The HP-9v2 Dual Angle Block Plane features an A2 tool blade which has been hardened to Rockwell 60-62 for added durability in cutting hard or soft woods. One Blade for Two Functions John Economaki pioneered a new way to build a block plane which allows for an iron with dual edges; one ground primarily for end grain (42-degree attack angle) and the other for general purpose use (47-degree attack angle). We believe the HP-9v2 Dual Angle Block Plane is the most versatile block plane available today--one plane body with one iron equals two planes. Magnetic Blade Guard The blade is equipped with a magnetic blade guard that sticks to the unused edge to protect your finger and the unused edge both in use and sharpening. Stainless Steel Sole and Adjustable Throat Plate The stainless steel sole has a flatness of 0.05mm/0.002" that ensures a precision cutting and features an adjustable stainless steel mouth allowing for moving the throat plate forward and backward easily. Becoming a Thickness Plane The depth skids will allow you to turn the HP-9 v2 into a mini thickness planer. You will be able to dimension your stock with 0.05mm/0.002" or greater repeatability up to 32mm/1-1/4" in thickness. Some of the more obvious uses for this functionality are shoji screen components, jewelry boxes, inlay strips, and other projects where precise thin material is required. The HP-9 Dual Angle Block Plane is the only block plane available today with this capability. Dual Faces Fence The HP-9v2 Dual Angle Block Plane also features a guide fence. By attaching two fence posts to either side and attaching the guide fence, you can plane square edges and 45-degree faces, which allows woodworkers with less skill, or disabilities to achieve accurate results.

$139.00

HPI -12S 60/42 Scraping Iron Replacement Blade for HP-12 Dual Angle Block Plane. This robust replacement iron for the HP-12 is made of A2 tool steel and hardened to Rc60-62. It is 0.225" (5.7mm) thick and a full two inches wide (50.8mm). It is ground to 43 degrees with a 5 Degree micro-bevel on one end and the other end is a gap-toothed scrub iron ground to 25 Degrees with a 5 Degree micro-bevel. Mounted in the HP-12 with its 12 Degree bed, the result is a 60 Degree bevel for planing difficult grain and a 42 Degree scrubber for fast removal of stock across the grain. The bottom of the iron is lapped to a mirror finish (RMS .5 or better) and requires no further work by you to flatten it.

$99.00

Replacement Iron for HP-12 Dual Angle Bench Plane This robust replacement iron for the HP-12 is made of A2 tool steel and hardened to Rc60-62. It is 0.225" (5.7mm) thick and a full two inches wide (50.8mm). It is ground to 30 Degrees with a 5 Degree micro-bevel on one end and to 25 Degrees with a 5 Degree micro-bevel on the other end. Mounted in the HP-9v2 with its 12 Degree bed, the result is a 47 Degree bevel for normal planing and a 42 Degree for end grain. The bottom of the iron is lapped to a mirror finish (RMS .5 or better) and requires no further work by you to flatten it.

$59.00

Replacement Iron for the new HP-9v2 Dual Angle Block Plane *The new HP-9v2 Dual Edge Plane Iron will not fit the older version USA made HP-9 Plane. The older USA irons will fit on the new HP-9v2 planes but it will not be a tight fit. To order irons for the older USA made HP-9 Plane, please contact https://www.bctwlegacyrepairs.com/ This robust replacement iron for the HP-9v2 is made of A2 tool steel and hardened to Rc60-62. It is 3/16" (4.5mm) thick and 1-3/8" (35mm) wide. It is ground to 30 Degrees with a 5 Degree micro-bevel on one end and to 25 Degrees with a 5 Degree micro-bevel on the other end. Mounted in the HP-9v2 with its 12 Degree bed, the result is a 47 Degree bevel for normal planing and a 42 Degree for end grain. The bottom of the iron is lapped to a mirror finish (RMS .5 or better) and requires no further work by you to flatten it.

$179.00

In Stock Dual head design can move freely to mark any position Dual head made of anodized aluminum and one half of it can move freely to achieve accurate positioning of angles. Laser etched stainless steel ruler is easy to read The surface of stainless steel ruler is chromium plated; using laser etching graduations it is exact, easy to read, and very durable. Replace the straight ruler and the protractor Using the head with ruler can replace the same sized straight ruler. The angled head replaces a sliding bevel. Cam locking structure is suitable for everyone use The locking mechanism is a cam which is used to fix the head and blade. It is convenient and very easy for everyone to operate.

$99.00

In Stock Will Quickly Become One of Your Favorite Planes! HP-8 Mini Block Plane-- a small plane that does what only small planes can do, and that is the ability to do delicate and precise work using only one hand. The HP-8 is a tool for planning, chamfering and trimming of small wood stock.It also functions as a wood stock thicknesser that other ordinary planes cannot accomplish. The Plane lron The blade is made of tool steel with a fine grind on both sides, which makes the cutting edge razor sharp. It can reach the hardness of HRC 60-62. You can achieve a great finish with your HP-8. The HP-8 Mini Block Plane features a bevel-up iron bedded at 12 degrees creating an attack angle of 42 degrees. A 30 Degree Honing Guide (Optional) and a 50 Degree Honing Kit (Optional) allow you to hone the plane irons to precisely 50 degrees for planing highly-figured or reversing grains in your work piece. Precise Blade Adjustment System The HP-8 Mini Block Plane has an adjustable blade depth mechanism with a combined feed and lateral adjustment knob, which makes the settings easy and accurate. Rotating the adjustment knob one turn can make a fine adjustment of 0.07mm (approx. 0.003") in the blade depth. Premium Material The HP-8, milled from a solid aluminum billet, is of great durability and rust resistance. The Aluminum Sole and Adjustable Throat Plate The aluminum sole has a flatness of 0.05mm/0.002" that ensures a precision cutting and features an adjustable mouth alowing for moving the throat plate forward and backward easily. Thickness Planing The most amazing capability of this small block plane is the ability to thickness plane small stock. With a set of Depth Skids dropped to your workbench surface and tighten, set the iron depth to a comfortable depth and plane until the plane quits cutting. The results will astonish you, all of your stock will be within 0.001" (0.025mm). The plane depth skids are made of aircraft- grade aluminum alloy, which ensures low friction and durability.

$39.00

In Stock KM-2 KerfMaker Both the KM-1 and KM-2 Kerfmakers make sizing grooves and dado cuts painlessly easy. While the KM-1 is limited to a maximum stock width of 2 inches, the KM-2 Kerfmaker will allow you to make cross laps and other joints with stock up to 100mm (4 inches) in width . With a wider capacity, you can now use the KM-2 with a dado head and it can be calibrated to any kerf size up to 25mm (1 inch) in width. In addition, magnets are embedded in the end of the two reference faces to hold the KM-2 in place so you do not need to by hand. The KM-2 also comes with a red magnetic reference stop which can be clamped in place and used either in the vertical or horizontal position. Another useful function of the magnets? Attach the KM-2 and stop directly to your saw when not in use. Whether you own a table saw, chop saw, radial arm saw, the Jointmaker Pro, router table or any other tool that makes a clean kerf, you can use the KM-2 to expand that kerf to suit your needs. It is an amazing little tool that has earned our coveted "Bacon Saver" status. This means you will get gallery quality results every time you use the Kerfmaker. The KM-2 is perfect for: Frame work, box makers, shoji screens, torsion boxes, carcase work, drawer making, and the list goes on. It is a tool that once used, you will never want to lose. The concept is simple: the Kerfmaker is first "calibrated" to the particular cutting tool’s exact kerf. This is a one-time step. You then simply gauge the thickness of your stock with the Kerfmaker, lock, and you now can use the Kerfmaker as a flip stop to create a groove the exact width of your stock! This ingeniously designed and patented tool is fast and potently accurate. The KM-2 closed is 7-1/8" (181.5 mm) in length,1-3/4" Tall (44 mm), and 5/8" thick (16mm). It gauges stock width up to 4" (100 mm) with a maximum kerf of 1-1/6" (27 mm).

$32.00

In Stock Scratch awls are one of the most useful tools in a wood shop. It is ideal for hole layout, starting screws, and other activities where precise indication is needed. The handle for scratch awl is anodized aluminum and the point is Titanium Alloy. Our scratch awl is a really cool little tool that works as an extension of your index finger. This tool is used for scribing lines in confined spaces, also useful in many other situations where a thin shaft can assist you in your intent. From leather working to starting screws in wood or sheetrock. Our SA-3v2 Bent Tip awl is unique in the woodworking community. It's history began as a mistake that proved quite useful in the field. When you need to scribe a line in a confined environment the bent tip insures your line stays true to your intent. Lines such as this may not be possible with our SA-2v2 Scratch Awl. ■SA-1v2 Scratch Awl Overall length is approximately 4-1/2 inches (115 mm) with a CNC turned and anodized aluminum handle. ■SA-2v2 Scratch Awl Overall length is approximately 8 inches (203 mm) with a CNC turned and anodized aluminum handle. ■SA-3v2 Bent Tip Scratch Awl Overall length is approximately 8 inches (203 mm) with a CNC turned and anodized aluminum handle.

$139.00

In Stock A Unique Tool with Surprising Versatility The Universal Gauge (UG-1) is one of the handiest protractors and layout tools we have ever designed and is made for makers who have limited space and those who understand the value of their time. It is perfect for setting or checking angles on table saw blades, jointer fences, band saw blades, drill press tables and much more. Try Square There are two 90-degree references within the functionality of the UG-1, one fixed and one utilizing the protractor arm. Accuracy of the fixed square is plus or minus 0.05mm(0.002”) over the length of the 90mm(3.5”) leg. Protractor Utilizing a laser etched 45-degree quadrant, (0. 5° graduations, and it is easy to visually reference a quarter of a degree), and a 144. 5mm (5-5/8") long protractor leg, the UG-1 is a quick and fast protractor to transfer the angle precisely. Adjustable Reference Leg Featuring an offset which serves two purposes: Allows the 2mm (0.079”) thin blade edge to fit between the teeth of a circular saw blade. By chucking a drill rod blank in the drill press, you have two surfaces on the arm to help precisely set the drill press table to either square or any angle up to 45 degrees. It features quick reference icons for the common angles needed to make polyangular forms. For those who make hand cut dovetails, it is easy and fast to quickly set the protractor arm to either 6:1 or 8:1 ratios using the quick set icons as a reference. Direct Reading Bevel The UG-1 is an effective layout tool. The blade sits flat on your work piece which allows for precise transfers of angularity between the tool to your stock. It features a two-point locking system. And the locking lever facilitates those with hand strength constraints. Depth Gauge The depth gauge function of the UG-1 will measure depths in cavities as small as 1/4” (6mm) in diameter and up. Depth capacity is 76mm (3”). Use this to determine the depth of mortises, dados, rabbets, holes and other assorted recesses. It is fast, and locks via a jammed dovetail slide. It is particularly useful in conjunction with measuring depths when cut by a router. In addition, this is the tool to use when you need to precisely offset a split fence on a router table or shaper. Height Gauge Often overlooked as a valuable shop aid, a good height gauge can save a lot of time. It is primarily used as a static way to set the height of circular saw blades, JMP blades, router bits and shaper cutters. It positively locks via a jammed dovetail slide. Marking Gauge The marking gauge on the UG-1 is a quick way to layout lines a specific distance from the hook reference. It is not as efficient, or as versatile as a stand-alone marking gauge but works well for tenon layout and other smaller scale applications where parallel lines of a known distance are required. Simply set the red indicator at the desired distance and mark along the bottom edge of the indicator. Inch/Metric Comparison Tool The marking gauge of the UG-1 features opposing scales, one imperial, one metric. Sooner than you think possible, you will learn that 25mm is about an inch, 12mm is about ½” and so on. Centering Rule The UG-1 can be used to quickly fInd dead center of stock up to 140mm (5.5”) in width. The scale is metric which is ideal for a centering rule, all you need to do is align the two same numbers on the right and left of the stock, and rule will indicate center at the 0 mark. Flip Standoff When you need to lay the Universal Ga u ge on a flat surface, flip the standoff downward and slide the red marking ga u ge assembly to the top of the tool and lock. This will keep the Universal Ga u ge from tipping. The Magnetic Base There are times where a magnetic base is ideal when you need both hands for other tasks.

$4.99

Empty 15 ml bottle for storing food grade oil to protect your new chopsticks.

$55.00

In Stock The Chopstick Master™ Green Arm is an optional accessory for the all new Chopstick Master™

$49.99

In Stock The Flat Stock Planing Arm for the Chopstick Master™ The Flat Stock Arm for the Chopstick Master™ allows you to plane small pieces down to .06” thick.

$95.00

Shopping for someone else but not sure what to give them? Give them the gift of choice with a gift card. Gift cards are delivered by email and contain instructions to redeem them at checkout. Our gift cards have no additional processing fees.

$23.00

Bridge City Tool Works Japanese Saw Replacement Blades JS-1E/2E/3E/4E/5E/6E/7E/8E Please select from the options above for your Japanese Saw Replacement Blades.

$169.00

In Stock Acceptance of Most Available lrons and Chisels The HG-4 Honing Guide has been widened to accept irons up to 70mm (2-3/4") in width. The pivoting clamping bridle will accommodate aggressively tapered tools, such as Japanese chisels. And it features the design of triangle cut, which can accommodate the much narrower chisels than you think. Built-in T-square The built-in sliding T-square ensures the squareness of the cutting edge. Fine Adjustment Knob The blade angle or micro bevel can be quickly fine tuned with the rear adjustment knob. One revolution of the knob adjusts the blade angle just under 1 degree. Setup Gauge with Consistent Angles Using the setup gauge for consistent angles at 20° 25° 30°and 35°. Three of the fixed references have cutouts to eliminate interference with the clamping pad. Premium Materials The HG-4 is primarily constructed from anodized Aircraft Grade aluminum alloy with a solid brass roller and stainless steel hardware, ensuring you a great rust and wear resistance.

$49.00

Of all the different wood joints you will make, one of the most difficult is one of the simplest–the miter joint. Let’s say you are making a frame and your layout tool is off by 0.08mm, this little 0.08mm error multiplied by the eight cuts means that fourth corner now features an ugly 0.3mm gap which is just under 1/32” of an inch, directly influencing the tightness of the joint and the appearance. Therefore, you need a precision miter square for highly accurate woodworking design, machine setup and block checking. Tight joints through highly accurate parts The Miter Square is accurate to ±0.05mm over the full length of the blade, inside and out. The angularity accuracy of the 45° angle and the 135° angle formed by the steel blade and handle is less than 0.036° which helps ensure the accuracy of your projects. The handle is stable and adjustable The handle of the miter square consists of two L-shaped sections that sandwich the blade and forms a tight and accurate 45° with the handle. If the miter square becomes loose, the mounting screws can be re-tightened to resume the original accuracy. The handle design is ergonomic The hollow design of the handle is easy for the operator to grasp and hold. Stainless steel blade with high hardness for fine marking The blade, made of stainless-steel, has a smooth finish with superior hardness and is rust and wear resistant. It can be used with a marking knife. Special finishing, leaving no fingerprints The finish of the stainless- steel blade is processed with a special PVD coating (Physical Vapor Deposition) which provides a stunning decorative finish with strong corrosion and wear resistance. The surface of the blade can be marked with a pencil, leaving no fingerprints when wiped clean. Anodized aluminum makes a great matte finish The surface of miter square has matte finishing, which is beautiful and of maintenance free. One side of the handle is dark grey; the other side is silver. The trim inside the handle is orange. Its material of anodized aluminum alloy increases the hardness and wear resistance.

$29.99

In Stock 20 pieces (10 sets) of chopstick blanks sized to work immediately on your Chopstick Master™.

$179.00

The Hand Powered Palm Brace That "Charms Your Socks Off" Designed by John Economaki Inspired by a woodcut image of a little brace for grinding the valve seats in an old manual for Ford Model T, John Economaki became obsessed with the possibility of a similar tool perfect for hand drilling and screwdriver, and he created the PB-1 Palm Brace in 2000. In 2008, John designed the Commemorative Edition Palm Brace CT-16 to celebrate our woodworking heritage. CT-6 perfectly embodied John's Minimalist Artistic Approach in design and its "Black and White" simplicity created a new visual aesthetic only possible with modern processes. Twelve years later, with the inheritance of the legendary PB-1 and CT. 16, John Economaki created the brand new Palm Brace PB-2. PB-2 Palm Brace is a progressive evolution of PB-1 and CT.16 owing to John's continuous passion for perfection and the advancement of modern technology. Compared to CT.16, PB-2 features a Titanium Brace Arm made of Grade 5 Titanium Ally (TC4) which Provides Superior Strength, Hardness and Light Weight. Secondly, PB-2 features the Complete PVD coatings of Titanium Carbide (TiC) on all surfaces with unmatched scratch resistance and Jet Black Ceramic Finish. Combination drilling/countersinking is equally fun and impressive with the PB-2 Palm Brace. It's very easy to accurately control depth, with a single drill/countersink bit, you'll be able to seat #4-12 Flathead screws with ease and perfection. (Single flute counter- sinks work great in wood and non-ferrous metals.) Drilling is remarkably fast and the bits are all positive locked in the precision 1/4”Hex Keyless Chuck while exciting a hole. Driving screws with the PB-2 Palm Brace will "charm your socks off". It is a tool where you can "feel" the exact torque needed to do sensitive work, a really big deal with small brass screws. No more stripped screws, no more broken screws. Once you use the PB-2 Palm Brace to install hardware you will find a traditional screwdriver awkward! All parts of PB-2 Palm Brace are made of Alloy 303 Stainless Steel or Grade 5 (TC4) Titanium Alloy. The overall height of PB-2 is 8-1/2". The arm radius swing is 2-1/4". The Keyless Chuck takes all bits with 1/4” hex shanks. We guarantee that the PB-2 Palm Brace will be one of those tools that make you feel compelled to show them to your woodworking friends. It works extraordinarily well and has a charm that is hard to match! Enjoy your woodworking!

$179.00

In Stock The Third Generation of The Legendary CenterScribe In 1992, John Economaki created the first CenterScribe CS-1. It automatically finds the cernter of stock. CS-1 became one of the most popular tools because it scribes the center of a board without measuring and math! In 2008, John came up with the second generation of CenterScribe CS- 2 with modern structure of anodized aluminum. Besides the centering features of CS-1, CS-2 CenterScribe can also locate the centers of cylinders and squares with progressive design. Twelve years later, John redesigned the CenterScribe, and here comes the brand new CS-3 CenterScribe. Like every other tools of Bridge City, CS-3 CenterScribe is designed with perfect combination of intended functions and unique aesthetics. Compared to CS-2, CS-3 adds a built-in Mortise/ Tenon Attachment, which allows you to make perfectly centered layouts of mortises and tenons for stock of various widths without math! Also added is a lock knob, which is only used when you are using the CenterScribe with one outrigger engaged so it works like a marking gauge. The new lock knob thread is metal that presses against a skid plate to keep from scoring the arms. Constructed from anodized Aircraft Grade aluminum alloy parts and a unique stainless steel braided cable/pulleys system, CS-3 performs many functions including center findings of stock, cylinders, squares, and centered layouts for mortise and tenons. ●Scribe a centerline on stock up to 7-7/8" (200mm) wide ● Locate dead center on square stock 6-7/64"(155mm) square ● Locate dead center on round stock up to 7-7/8" (200mm) in diameter ● Locate the centerline of tapered stock quickly We are sure that this state of. the art CenterScribe CS-3 will make your woodworking much faster and easier, and it is obviously a visual pleasure in your shop!

$239.00

In Stock All woodworkers are literally creating art crafts when they work, because every woodworking project is different. Creative working is the best way to demonstrate the incredible intelligence and capabilties of human. So, we thought it would be fun to create a Special Version of the best selling HP-8 Mini Block Plane to Celebrate the creativity of the global woodworkers. We call this edition "HP-8X Celebration Edition Mini Block Plane". The HP-8X has no difference from HP-8 in functionality, but it features special structure materials and special surface finish: The body is made of high-grade Stainless Steel, the depth skid is made of Titanium Alloy All the surfaces are polished and PVD coated in three stunning cool colors: Jet Black, Sapphire Blue and Champagne Gold. The iron is mirror polished as well with refined to smooth adjustment mechanism. Because of the above upgrading, HP-8X is simply a speechless wonder for your hands and eyes! We believe HP-8X will give you the best opportunity to celebrate your creativity in woodworking! PREMIUM MATERIALS The plane body is made of stainless steel, ensuring you an excellent hand feeling. The Depth Skids of HP-8X are made of titanium alloy featuring extremely high stiffness and wear resistance. The stainless steel body and titanium alloy depth skids contributes to a perfect balance of weight, which will present you a smooth cutting experience. Adhering to the consistent aesthetics of Bridge City, the surfaces of all the main parts are processed with a special PVD coating (Physical Vapor Deposition) which provides a stunning ceramic finish with unmatched corrosion and wear resistance. DEDICATED DESIGN Precise blade adjustment system The HP-8X plane has an adjustable blade depth mechanism with a feed adjustment knob, which makes the settings easy and accurate. Rotating the adjustment knob one turn can make a fine adjustment of 0.07mm (approx. 0 003") in the blade depth. Plane for fixed thickness The most amazing capability of the small block plane is the ability to thickness plane small stock. By placing any reference material such as acrylic, Masonite, playing cards under the front and rear of the sole, you can drop the skids to your workbench surface and tighten. Set the iron depth to a comfortable depth and plane until the plane quits cutting. All of your stock will be within 0.001" (0.025mm).

$779.00

A Complete Personal Pencil Making Factory Imagine making a pencil for your child’s SAT test? Your grandchild’s first pencil? The opportunities for memorable gestures are endless. All of the steps are easy to achieve, the process is fun and the results are very rewarding. This “pencil factory in a box” can be enjoyed by your entire family on the kitchen counter! It is easy to use and allows young and old alike to make professional-grade pencils without woodworking experience or ability. Most of the parts of Pencil Precision are CNC machined from solid aluminum and anodized creating a beautiful finish that is almost as hard as a diamond. The plane iron and dies are made from hardened tool steel. By using the Pencil Precision Block Plane with the Plane Sled Unit, the default pencil shape is hexagonal. To make round, beaded or Reuleaux pencils, a hexagonal pencil is fed into the extrusion unit. A series of progressive dies remove material to create the desired pencil shape. Your pencils can also be painted in different colors if you like. All of the steps are easy to achieve, the process is fun and the results are very rewarding. --John Economaki THE PLANE SLED UNIT This unit is designed to allow kids to make hexagonal pencils without using the extrusion unit. Put the blank in the unit, tighten the clamp and in 4-6 strokes, you have cut a 1mm radius groove AND thickness planed the blank to the correct thickness. This is the beauty of depth skids on a hand plane. In practice, the unit sits on a provided anti-skid pad so it stays put and your table or counter is protected. Once you have finished the above steps on two blanks, you insert them into the grooves in the fixture. Without changing a thing on the plane, you plane until the skids hit the fixture and the plane no longer cuts. Flip the blanks and repeat to create the opposite edge. When these are glued together you have a perfect six sided hexagon, the standard pencil cross section. Clamping needs to be kid friendly and this is about as easy as it gets. Place the lead in one half, brush on some glue on the opposite blank and put the two halves together一the lead will align the two halves perfectly. Stand the pencil on end and slide on the tapered aluminum clamp below. Next, place a clamp on the other end. The major diameter of these clamps allows you to put the entire assembly back in the sled unit for clamping the middle section of the pencil. If you desire your pencil to be painted, lightly sand all of the corners with 400 grit. The sled unit converts to a paint rack as pictured below. Since the pencil will eventually need to be sharpened, and most likely will receive an eraser ferrule, you can rotate the ends of the blank with your fingers to paint all six faces without fear of screwing up the paint job. You can paint up to two pencils at a time. FERRULE UNIT The next step is to score the shoulder that the ferrule will butt against. This is done with the "Ferrule Unit". You insert the pencil until it stops, lower the cutter and spin the pencil until the cutter is parallel with the fixture. It is actually really easy. Then we have to create the tenon for the ferrule. This involves putting the pencil in the hole, peel off some wood back to the shoulder cut. The goal here is not to create a perfect cylindrical tenon, in fact, the irregularity of this helps create a firm ft with the ferrule. Putting the ferrule on dead straight is almost impossible without some help and we have it. The Ferrule Station can be rotated on end, drop a ferrule into the pocket and hold the blank in the alignment channel and tap the pencil home. Super easy and accurate. From here, you can put in one of the supplied erasers and sharpen with the included sharpener. And here is the shocker, not counting gluing time, or painting, you can make a pencil in 5 minutes. That is crazy fun! That is how you make hexagonal pencils. For other profiles, we need to use an additiona l unit. EXTRUSION UNIT This is the extrusion unit, and it uses progressive dies to make three other pencil profiles. This unit works by feeding a hexagonal pencil into the orange aluminum guide die. Forward motion is provided by rotating the crank until the pencil clears all three dies. We cannot tell you how much fun this is. This thing poops pencils! Enjoy the Fun of the Pencil Factory!

$49.00

A. PP Black Leads and Blanks Kit (25 pcs of black leads,ferrules and erasers, 50 pcs of pencil blanks) B. PP Colored Leads and Blanks Kit (25 pcs of ferrules and erasers, 50 pcs of pencil blanks, 8 pcs of yellow leads, 8 pcs of red leads, 8 pcs of green leads)

$159.00

In Stock A Radical Redesign of the Iconic Combination Square A good combination square functions as a square, miter square, depth gage, and a marking gage making it an indispensable reference in workshops the world around. Now, we introduce the CS-12v2 & CS-6v2 Combination Squares -- the radical redesign of the iconic combination square originally invented by Laroy S. Starrett in 1877. CS-12v2 & CS-6v2 Combination Squares are sure to inspire your best work—and those of your heirs—for generations to come. Two sculpted legs separated by a black web, this is one gorgeous tool that you will never want to loan to your pesky, cheap neighbor. Try Square Each square is individually calibrated to be within 0.002" (0.05mm) of 90 degrees measured at the end of a fully extended 12" (300mm) or 6" (150mm) blade. Miter Square This combination square features a 45 degree leg which can transfer the angle precisely. Depth Gauge This can be used to determine the depth of mortises, dados, rabbets, holes and other assorted recesses. Marking Gauge The marking gauge can layout the lines quickly and precisely. Lengthened Legs We lengthened the legs of the CS- 12v2 and CS- 6v2 from their traditional design roots to maximum 4-3/4" (120.6mm) and 2-11/16" (68.7mm). The 45 degree leg is significantly longer to improve registration with your stock. This precision milled square head is equally at home with the 12" and 6" blade. Same Scale on the Same Edge at Any Time The 12" and 6" Imperial blades feature left-to-right and right-to-left reading 32nds and 16ths. (The 300mm and 150mm Metric blades feature left to right and right to-left reading 1mm with extra 0.5mm resolution at the end.) You can flip the square over and view the same scale on the same edge. These blades have the industry standard layout with similar scales on opposite edges. This is an incredible improvement and will create fewer mistakes. Laser-etched Graduations All graduations are laser-etched -- they are easy to read and you should have no difficulties with clarity. Material The CS-12v2 & CS-6v2 Combination Squares are milled from stainless steel plate stock which has great rust and wear resistance, and all the surfaces of the main body and legs are complete PVD coated presenting you with the unmatched scratch resistance and incredible hardness.

$139.00

A Must-Have Handy Tool Featuring the try square, depth gauge, and a marking gauge, the Double square is a must have. Beautifully finished, this square will last for generations without any tarnishing or rust. It is a handy tool simply because they do not contain a 45° leg. The DS-6 Double Square is precisely milled, creating a tool with an accuracy limit of less than 0.002" (0.05mm) over the length of a fully extended blade. Try Square The accuracy of this square is controlled within 0.002" (0.05mm) of 90 degrees measured at the end of a fully extended 6" (150mm) blade. Depth Gauge This can be used to determine the depth of mortises, dados, rabbets, holes and other assorted recesses. Marking Gauge Using this marking gauge, you can quickly and precisely layout the lines. Same Scale on the Same Edge at Any Time The 6" Imperial blades feature left-to-right and right-to-left reading 32nds and 16ths. (The 150mm Metric blades feature left-to-right and right-to-left reading 1mm with extra 0.5mm resolution at the end.) You can flip the square over and view the same scale on the same edge. These blades have the industry standard layout with similar scales on opposite edges. This is an incredible improvement and will create fewer mistakes. Laser-etched Graduations The graduations (1/16", 1/32") are laser-etched for excellent readability. Material The DS-6v2 Double Square is milled from stainless steel plate that has great rust and wear resistance. The complete PVD coatings on all the surfaces present you with the unmatched scratch resistance and incredible hardness.

$79.00

As the same process as SR series rules, SE-24 24” Straight Edge is beautifully made of high-grade special stainless steel with PVD surface coating. It is accurate to a tolerance of 0.002” (0.05mm) over the whole length of the blade, and it is a dependable resource for the most demanding craftsmen. Every shop needs a straight edge and Bridge City SE-24 is an extraordinary buy! Exceptional Straightness With an exceptional straightness of 0.002"(0.05mm), the SE- 24 Straight Edge can be used to calibrated the flatness of your workpiece. Multiple Uses The SE-24 Straight Edge features surface ground edge, which combined with the high-grade stainless steel blade, gives a pristine surface for layout work with a knife. It is the perfect tool for checking plane soles, sighting wear in machine castings, setting up jointers, determining the twist in a plank of wood, and a myriad of other uses. Premium Material and Unique PVD Coating All the SE-24 Straight Edges are made of high-grade special stainless steel for excellent rust resistance. In addition, all the surfaces of SE- 24 Straight Edges are treated with advanced PVD coating (Physical Vapor Deposition), which provides a stunning decorative finish with strong corrosion, wear and fingerprint resistance. ***PVD (Physical Vapor Deposition) coating, also known as thin-film coating, is a process in which a solid material is vaporized in a vacuum and deposited onto the surface of a part. It is widely used in Aerospace, Automotive, Firearms, Optics, Jewelry and some consumer electronics, like the finishes of the iPhone. The surface of the SE- 24 Straight Edges can be marked with a pencil and easily wiped clean. Charming Package Design The SE-24 Straight Edges will come featured in a triangular prism shaped package that is designed with form, functionality, and fun in mind. Why a triangular prism, you ask? Not only will it look amazing as a decor, but will also add a certain geometrical charm to anyone' s workshop Inside of the triangular prism, we use high-quality foam to protect the blades from any accidental damages that may occur, so it's the perfect spot for storing your straight edges after every use. With an amazing tool in a great package, you'll have a tool that will serve you well for years to come!

$39.00

In Stock In 1984, John Economaki designed and introduced the SE-24, 24" Straight Edge to the Bridge City Tool collection. Followed by the SE-24, he then brought to life the SR (Straight Rule) series two years later. With John's unique design concept and amazing craftsmanship, these rules became extremely popular in the woodworking world soon after. Based upon the original concept, we have upgraded the rules with a high-grade stainless steel blade and added a stunning new PVD coating to make these rules top notch. Not only will these upgraded rules be functional and stylish, but also will be a great value over their predecessor. This makes the SE and SR rules a great addition to anyone's collection! Besides the obvious use as a straight rule, SR series rules are also excellent little straight edges with precision ground surfaces. They are terrific for marking, scoring, or cutting with knives. You can use them for layout work and for making precise measurements. All SR series rules are made of high-grade special stainless steel and all surfaces are coated by the advanced PVD (Physical Vapor Deposition) process. This unique PVD coating generates super surface hardness for wear resistance and low friction. As the old proverb says: “measure twice, cut once”. With that in mind, you can never have too many rules in the shop. Having an accurate and dependable rule such as the SR rules will improve your workflow, and will be your new “Go-To” tool in the shop. SR rules are available in three sizes with separate Imperial and Metric versions: 6" Pocket Rule 12" Bench Rule 24" Bench Rule SR-6-I SR-12-I SR-24-I 150mm Pocket Rule 300mm Bench Rule 600mm Bench Rule SR-6-M SR-12-M SR-24-M Laser-etched Graduations and Accurate Reading All graduations are laser-etched for precise readings and measurements, as well as wear resistance. The 150mm, 300mm and 600mm Metric rules feature left-to-right (right-to-left on the other side) reading 1 mm with extra 0.5mm resolution at the end. The 6", 12" and 24" Imperial rules feature left-to-right (right-to-left on the other side) reading 32nds and 16ths. The 6" and 12" Imperial rules have laser-etched graduations on the end of the blade for ease of use without cluttering the 1" end. Multiple Uses The SR series rules feature surface ground edge, which combined with the high-grade stainless steel blade, gives a pristine surface for layout work with a knife. It is the perfect tool for checking plane soles, sighting wear in machine castings, setting up jointers, determining the twist in a plank of wood, and a myriad of other uses. 32mm Indexing Points (Metric Version) Metric rules have an indexing point at every 32mm, which assists you to utilize the 32mm System much more easily. The 32mm system is commonly utilized in European-style cabinetmaking to space the distance between the holes for shelf supports. Premium Material and Unique PVD Coating All the SR series rules are made of high-grade special stainless steel for excellent rust resistance. In addition, all the surfaces of SR series rules are treated with advanced PVD coating (Physical Vapor Deposition), which provides a stunning decorative finish with strong corrosion, wear and fingerprint resistance. ***PVD (Physical Vapor Deposition) coating, also known as thin-film coating, is a process in which a solid material is vaporized in a vacuum and deposited onto the surface of a part. It is widely used in Aerospace, Automotive, Firearms, Optics, Jewelry and some consumer electronics, like the finishes of the iPhone. The surface of the SR series rules can be marked with a pencil and easily wiped clean. Charming Package Design The SR series rules will come featured in a triangular prism shaped package that is designed with form, functionality, and fun in mind. Why a triangular prism, you ask? Not only will it look amazing as a decor, but will also add a certain geometrical charm to anyone's workshop. Inside of the triangular prism, we use high-quality foam to protect the rules from any accidental damages that may occur, so it's the perfect spot for storing your rules after every use. With an amazing tool in a great package, you'll have a tool that will serve you well for years to come!

$219.00

The DJ-3-J Jaw Kit is an optional accessory for DJ-3 Universal Drilling Jig, it includes the 45° Miter Jaws and Long Accessory Jaws. With this Jaw Kit, you can drill dowel holes on 45 degree miter pieces or drill angled holes on flat surfaces. This kit will take the drilling capabilities of DJ-3 Universal Drilling Jig up a notch! Dowel Holes Drilling on 45 Degree Miters Want miter joints that can be strengthened with dowels? The DJ-3 Universal Drilling Jig, when fitted with the 45° miter jaws, will always drill holes perpendicular to the mitered edge directly on the centerline. In addition, with the compensation of the adjustable jaw, the optimal strength can be achieved by moving the hole as close to the inside face as possible to drill the deepest hole without drilling through the stock. Stock of ANY length can be drilled with the 45° miter jaws, and the maximum width of stock that can be drilled in this case is up to 7-9/32" (185mm). Angled Drilling on Flat Face Drilling holes at an angle is extremely easy with the long accessory jaws. In conjunction with Long Accessory Jaws, the large diameter bits with nominal shank diameters can be used for drilling large holes. Using this setup, holes can be drilled up to 45 degrees. The maximum thickness of stock is up to 5-5/16" (135mm). The thoughtful design of the index pins makes it much easier to align the two jaws and adjust the both adjustable reference surfaces to be planar. Premium Materials The DJ-3-J Jaw Kit is CNC machined from 6061 aircraft grade aluminum alloy for excellent rust resistance. With a special anodization process, these accessories will bring a vibrant and elegant look while being resilient to wear and corrosion.

$499.00

In Stock DJ-3 Universal Drilling Jig -One Tool for 9 Drilling Applications The History At all times, John Economaki - the founder of Bridge City Tool Works has been dedicated to creating the Fewest Number of Tools for makers to create high-level work in a confined space. John brought the first- generation Drilling Jig DJ-1 in 2009, which addresses the vast majority of drilling needs encountered by woodworkers and can realistically replace a stationary drill press. In 2012, he designed the second generation DJ-2 Drill Jig. 9 years later, John made his third design of the Drill Jig! And now, we are excited to introduce the 3rd- generation Drill Jig DJ-3 Universal Drilling Jig! With 9 kinds of drilling capabilities, incredible drilling accuracy and stunning appearance, DJ-3 will be an amazing new tool for your workshop! There is no more accurate way of drilling holes than through a drill bushing. The DJ-3 Universal Drilling Jig allows for two drill bushings to be inserted with a maximum drill size of 1/2” (13 mm). Compared to the previous generations of Bridge City Drill Jigs, DJ-3 features a new and improved stop system, and an adjustable jaw for off-center drillings. Using a similar dual cable adjustment system as the Bridge City CS-3 CenterScribe, the DJ-3 Universal Drilling Jig will self-center on stock up to 12-13/32” (315 mm) in width. In addition, the DJ-3 will allow for off-center drilling up to 60 mm from center. Also, the DJ-3 Jaws are configured to hold cylindrical stock and spheres. With different configurations, DJ-3 is able to handle 9 different drill applications as below: Center Drilling on Flat Face Off Center Drilling on Flat Face Drilling on Round an Tube Stock Axial Drilling on Round Stock Bias Drilling on Square Stock Axial Drilling on Square Stock Center Drilling on Sphere Dowel Hole Drilling on 45 Degree Miter* (with the optional Jaw Kit DJ-3-J) Angled Drilling on Flat Face* (with the optional Jaw Kit DJ-3-J) As you will soon learn, the DJ-3 can easily be thought of as a drill press in a box. It offers a legitimate answer to the drilling needs of many customers without sufficient space. Amazing Drilling Accuracy The bushings are made of tool steel, hardened to a Rockwell of 60- 62 HRC. After thousands of hours of research and experiments, we found that this specific hardness gave the maximum life to both the bushings and the drill bits, so that the drilling accuracy is guaranteed. In addition, the bushings have a tolerance of 10 microns, which ensures every hole drilled using this jig will be incredibly accurate. Improved Stop System For repeatability, the DJ-3 is equipped with an improved Stop System. The flip stop are designed to reach the stock regardless of which "V" Groove is used. Drilling multiple, accurate holes has never been this easy! Thoughtful Design for Storing the Hex Wrench The 2mm hex wrench is conveniently stored in the body of the DJ-3 and is retained by a hidden rare earth magnet. Premium Materials The DJ-3 Universal Drilling Jig is mostly made of 6061 aircraft grade aluminum alloy for excellent rust resistance. In addition, the DJ-3 Drilling Jig is anodized for a vibrant and decorative finish with strong corrosion and wear resistance. Standard Bushing Kit The DJ-3 Universal Drilling Jig comes with the Standard Bushing Kit including 28 bushings of the following sizes: Eleven Imperial Bushings: 1/16" x1,1/8" x1,3/16" x1, 1/4" x2, 5/16" x1,3/8" x2, 7/16" x1,1/2" x2. Seventeen Metric Bushings: 1mm x1, 2mm x1, 3mm x1, 4mm x2, 5mm x1, 6mm x2, 7mm x1, 8mm x2, 9mm x1, 10mm x2, 11mm x1, 12mm x1, 13mm x1. Center Drilling on Flat Face sing a similar dual cable adjustment system as the CS-3 CenterScribe, the DJ-3 Universal Drilling Jig can automatically align the bushings with the centerline of the workpiece. The maximum width of stock that can be drilled in this case is up to 12- 13/32" (31 5mm). Off Center Drilling on Flat Face The DJ-3 will also allow for off center drilling up to 60mm from center by using the laser-etched graduation on the back of the adjustable jaw. Drilling on Round and Tube Stock Milled into the removable jaws of the DJ-3 are two "V" grooves for drilling perpendicular holes on round or tube stock. The maximum diameter of stock that can be drilled in this case is up to 2 -3/8" (60mm). Axial Drilling on Round Stock Round stock of ANY length can be drilled axially with the DJ-3 Universal Drilling Jig. This is the use that a drill press cannot compete with. The maximum diameter of stock that can be drilled in this case is up to 12- 13/32" (31 5mm). Bias Drilling on Square Stock Because of the bushing we are using, the larger drills bits will not drift off the center line. The maximum side length of stock that can be drilled in this case is up to 1-19/32" (40.5mm). Axial Drilling on Square Stock Square stock of ANY length can be drilled axially with the DJ-3 Universal Drilling Jig. This is the use that a drill press cannot compete with. The maximum side length of stock that can be drilled in this case is up to 8-55/64" (225mm). Center Drilling on Spheres Spheres from 5/16" (8mm) to 2-3/8" (60mm) in diameter can also be easily drilled with the DJ-3 Universal Drilling Jig. Dowel Holes Drilling on 45 Degree Miters* (with the optional Jaw Kit DJ-3-J) Want miter joints that can be strengthened with dowels? The DJ-3 Universal Drilling Jig, when fitted with the 45° miter jaws, will always drill holes perpendicular to the mitered edge directly on the centerline. Stock of ANY length can be drilled with the 45° miter jaws, and the maximum width of stock that can be drilled in this case is up to 7-9/32" (185mm). *This drilling application must be completed in conjunction with the optional Jaw Kit DJ-3-J. Angled Drilling on Flat Face* (with the optional Jaw Kit DJ-3-J) Drilling holes at an angle is extremely easy with the long accessory jaws. In conjunction with Long Accessory Jaws, the large diameter bits with nominal shank diameters can be used for drilling large holes. Using this setup, holes can be drilled up to 45 degrees. The maximum thickness of stock is up to 5-5/16" (135mm). *This drilling application must be completed in conjunction with the optional Jaw Kit DJ-3-J.

$49.00

$139.00

In Stock

$139.00

In Stock

$529.00

In Stock

$139.00

In Stock

$139.00

V-Groove Kit for HP-6FX Mini Multi-Plane

$529.00

In Stock HP-14 Scraper Plane A Real Head Turner That Will Make Wood Grain Shake In Fear! -John Economaki In 2017, with much anticipation, John brought the HP-14 Scraper Plane into public eye. Five years later, we integrate the excellent new designs and optimizations with the HP-14, and are honored to announce this brand-new HP-14 Scraper Plane to all the woodworkers. The HP-14 Scraper Plane is a specialized hand planing tool that is great for trimming and smoothing surfaces with difficult grain patterns. With proper use of the HP-14 Scraper Plane, you can achieve a smoother surface and be able to work with more delicate materials. The reason for this is because the iron is scraping as opposed to shearing, which removes very little amounts of material at a time, resulting in smoother finishes without grain tear-out. The HP-14 Scraper Plane is a hand tool that will bring you immense pleasure and comfort on projects to come. Classic “Skeletonized” Design The HP-14 Scraper Plane continues to showcase the “skeletonized” style of plane body that is seen on the HP-9v2 & HP-12 planes. Featuring an all-metal front and rear totes, the plane body is designed to fit nicely in hands of all sizes. The front tote is a “mushroom” shaped piece made from machined aluminum, which is then bead blasted and anodized black. The “mushroom” shape provides improved ergonomics over the more common “balloon” shaped totes. On the other hand, the rear tote is casted from 304 stainless steel with the two interior cavities painted black. The shape of the rear tote invokes the illusion of movement, whereas the highly polished curved surfaces add a nice touch of contrast to the colors of the plane. Re-designed Iron Angle Adjustment Mechanism One of the most remarkable re-designs of the Iron Angle Adjustment mechanism is the addition of self-lubricated bearings, which eliminated any excess movement or “play” in the mechanism. This resulted in precise angle adjustments, ease of setup of the iron, and resulting in much better finishes for the workpiece. Wide Range of Angle Adjustability With the improved re-designed Iron Angle Adjustment Mechanism, you can make angle adjustments ranging from 88°~117°, which allows you the ability to handle many different types of wood of various hardness and roughness. Scraping Depth Micro-Adjustment With the scraping angle determined, the HP-14 Scraper Plane allows you to dial in the correct scraping depth using the micro-adjustment feature. By rotating the orange lock wheel in small increments of 1/3 turn counterclockwise, you can increase the scraping depth by 0.04~0.01mm. This allows you to fine-tune the scraping depth at precisely the correct angle needed for the workpiece. The Iron The HP-14 plane iron is made of hardened tool steel with a Rockwell hardness of 58 to 62. This makes the iron suitable for working with all different types of hardwoods and difficult grain patterns. The iron’s thickness is up to 15/16”, which allows for excellent stability while scraping. The primary bevel angle of the iron has been honed to 45 degrees, which provides ease of use, maintenance, and extended life of the iron. C NC Machined Stainless Steel and Anodized Aluminum Alloy The plane sole, rear tote, and all the hardware on the plane are made from CNC machined stainless steel. The rear tote has been designed with ergonomics in mind, while maintaining elegance with its polished finish. The Iron Clamping Mechanism, Angle Adjustment Mechanism, and the Side Plates are made from CNC machined aluminum alloy. The aluminum components are anodized to provide reduced friction, increased hardness, while looking exquisite. Strictly Controlled Sole Flatness To ensure that the HP-14 Scraper Plane produces a consistently smooth and even finish on a workpiece, the plane’s sole has been strictly controlled to a flatness tolerance of 0.05mm or less.

$296.99

In Stock

$249.99

In Stock

$129.99

In Stock

$659.00

In Stock Introducing the extraordinary HP-10 Foxtail Convertible Plane from Bridge City Tools. Designed to surpass all expectations in planing tasks, this precision hand tool showcases a compact and ergonomic design, guaranteeing effortless handling and precise control. With meticulous attention to detail, the HP-10 embodies Bridge City Tools' unwavering commitment to excellence. Back in 2006, the founder--John Economaki of Bridge City Tool Works embarked on a mission to revolutionize the user experience of traditional European planes. It was during this pursuit that he had an encounter with a wild fox, mesmerized by the stunning beauty of its fluffy tail. This enchanting moment became the inspiration for the first plane in the "FOXTAIL" series—the HP-7 SHOULDER PLANE. Renowned for its exquisite design, unique mechanism, and exceptional performance, the HP-7 quickly captured the hearts of woodworking enthusiasts. Building upon the success of the HP-7, John introduced the CT-14 1-1/8" FOXTAIL SHOULDER PLANE later that year. This larger version featured a captivating "skeletonized" body with a pierced design, perfectly aligning with the overall "FOXTAIL" theme. In fact, when viewed as a whole, the CT-14 resembled a proud male fox, as John envisioned. Woodworkers were captivated by its remarkable design, functionality, and remarkable performance, solidifying its status as one of John's most memorable tools. Now, we proudly present the latest addition to the "Foxtail" series—the HP-10 Foxtail Convertible Plane. Standing out with its distinctive design, the HP-10 is a versatile small plane system. It boasts interchangeable soles and mated, self-indexing irons, providing effortless customization and improved usability. Designed to accommodate fences and depth skids on both sides, the HP-10 caters to the needs of both right and left-handed users. Equipped with the standard Shoulder Iron Kit, the HP-10 delivers exceptional shoulder planing capabilities. But that's not all! By simply swapping the iron kits, the HP-10 transforms into a rabbet plane, a coving plane, or even a crowning plane. Experience the true potential of the HP-10 and unlock a world of precision in your woodworking endeavors. Embrace the rich legacy of Bridge City Tool Works, esteemed for its craftsmanship of exceptional tools. With the HP-10 Foxtail Convertible Plane, you can confidently immerse yourself in the Bridge City Tool Works experience—a seamless blend of precision, performance, and unwavering dedication to excellence. Elevate your woodworking mastery and unlock a world of precision and creativity with the HP-10, a testament to the artistry and ingenuity of Bridge City Tool Works. The Unique Design of the HP-10 Presenting the latest innovation in the Foxtail series - the HP-10 Foxtail Convertible Plane. Distinguished by its distinctive design, the HP-10 functions as a versatile small plane system. Interchangeable Soles and Irons It boasts interchangeable soles and mated, self-indexing irons, enabling effortless customization and improved usability. As a standard feature, the HP-10 comes with a Shoulder Iron Kit, providing exceptional shoulder planing capabilities. However, it doesn't stop there. By simply swapping the iron kits, the HP-10 can transform into a rabbet plane, a coving plane, or even a crowning plane. Explore the true potential of the HP-10 and unlock a world of precision in your woodworking endeavors. Also, to accommodate users of the older version of HP-10, all the soles and irons of the new version of HP-10 are compatible and can be adapted for use on the older version of HP-10. Unique Foxtail Handle The ergonomic foxtail handle is thoughtfully designed to provide a secure and comfortable grip, minimizing fatigue during extended use. Through meticulous polishing, the foxtail handle delivers an exquisite tactile and visual experience. The Iron Bed The angle of the iron bed, meticulously designed to be 20°, provides an ideal attack angle for achieving smooth surfaces without tearing, feathering, or chatter marks. With the bevel-up installation of the irons, the HP-10 with different irons can provide versatile cutting angle for your needs. Efficient Blade Tension Effortlessly control blade tension with the innovative four-linkage mechanism, enhancing your work efficiency and productivity. Easy Adjustments Iron Adjustment Easily adjust the cutting depth using the knurled locking wheel, ensuring precise and effortless adjustments to meet your specific requirements. Rotating the Knurled locking wheel clockwise increases the cutting depth, while rotating counterclockwise decreases it. When the knurled locking wheel is turned one full revolution, the cutting depth changes by 0.45mm (0.017”). Mouth Adjustment Additionally, the mouth opening can be easily adjusted by loosening the front tote and sliding the front sole as needed, minimizing tear-outs and splits when working with difficult grain patterns. Standard Shoulder Iron Kit Experience the versatility of the included shoulder iron kit, featuring an adjustable mouth for fine-tuning shaving thickness and achieving clean and accurate cuts even on challenging grain patterns. With the 20° iron bed and bevel-up installation, the cutting angle of this should plane is 20°. Excellent Accessories Dual Faces Fence Enhance accuracy with the dual faces fence, allowing for planing square edges or flipping the fence to plane 45-degree faces. This feature enables woodworkers of all skill levels to achieve impeccable results. Depth Stop Assembly The HP-10 comes with a set of Depth Stop Assembly, providing precise depth control during your woodworking projects. Whether using the shoulder iron or rabbet iron, the Depth Stop Assembly ensures consistent and accurate grooves up to a maximum depth of 28mm (approximately 1-3/32"). It can be easily installed on either side of the plane body to accommodate your specific needs. Unparalleled Craftsmanship The HP-10 is meticulously crafted with CNC machining techniques using stainless steel and aluminum alloy, ensuring unrivaled durability and stability. Optional Kits Explore the boundaries of what the HP-10 can achieve with our optional kits, enabling astonishingly precise cuts in coving, rabbet, and crown profiles.

$5.00

$39.00

In Stock

$189.00

In Stock

$129.00

$29.00

$99.00

$2109.00