Underwater CB Triple 50

$290.00

The Cable 3/8 x 65′ is a durable, stainless steel wire rope that has been designed to be strong, flexible, and should last a very long time in marine and industrial applications. The design of the cable considers ‘performance’ and ‘corrosion resistance’ while being a good selection for applications when flexibility and consistent tension and support must be maintained for long periods of time, such as boat lifts, dock rigging, or winching. The Cable 3/8 x 65′ has all of the properties of 7×7 construction as well as easy flexibility, and has all the corrosion resistance of stainless steel with the strength and integrity expected of marine applications. Key Features 3/8-inch diameter, 65-foot length: This size offers substantial tensile strength and provides ample reach. It is great for large lifts or tensioning projects. If you are buying a lift system for a full-size boat or setting up an extended configuration dock rigging, you can run the system with the rope without splicing it. 7×19 stainless steel material: This is constructed with 7 strands of stainless steel wire, each with 19 individual wires, allowing for a configuration that offers a large amount of flexibility while maintaining strength. It has great resilience to kinking and is easy to handle and bend, allowing you to wrap it around winches or pulleys. Available in 304 or 316 stainless steel: 304 stainless steel is suitable for general outdoor and marine use, offering good corrosion resistance and a breaking strength of up to 12,000 lbs. 316 stainless steel has the same alloying elements as 304, with the addition of molybdenum, which provides increased resistance to saltwater corrosion, making it more suitable for extreme marine applications. Durable marine-grade material: Designed to withstand rust, corrosion, and wear in saltwater and coastal environments. Excellent for boat lifts, mooring lines, railing systems, and rigging. Adaptable and flexible: easy to install, spool, and cut to length; works with clamps, thimbles, and eyelets for custom configurations. Additional information Installation/usage instructions: The cable can be cut and finished with wire rope clamps, thimbles or crimping sleeves, depending on your application. It is best to use stainless steel hardware to give you full corrosion protection. Always observe correct safety standards for load rating and installation methods. Care and maintenance: After use in saltwater rinse with fresh water to reduce build-up and prolong service life. Periodically check for signs of fraying, corrosion, or mechanical wear. Store the coiled cable in a dry place and avoid overstretching and bending to maintain its condition.

$3.22

The Cable 5/16 GAL per foot is a reliable, marine braided, galvanized steel cable. It offers the perfect blend of strength, durability, and versatility. It is an ideal cable for use in boat lifts, dock rigging, or many other marine applications you can depend on for support at a custom length. With 7×19 construction, this wire rope ensures high tensile strength while providing great flexibility to work in extreme waterfront conditions. Key Features 5/16-inch Galvanized Steel Cable: An industrial-grade cable at 5/16-inch diameter is a great load-carrying capacity while still being flexible enough to work in nearly all common styles of boat lift and marine rigging. Sold by the foot for custom applications: If you are only replacing one particular line or planning an entire lift system, you can buy this cable by the foot to ensure you have the exact lengths your unit requires, without waste and no need for guesswork. 7×19 flexible wire configuration: This wire cable is engineered to be flexible when used in pulleys, drums, and winches. The flexibility allows it to be used with some play; however, it is still strong enough to lift plenty of weight. Hot-dip galvanized coating: The hot-dip galvanizing is made of zinc, which is a coating that minimizes rusting and corrosion when used outdoors and with marine environments. It is not designed for use in salt water like stainless steel, and while it is acceptable in fresh water and limited period of salt water with regular maintenance, it is not designed for use in seawater or beyond occasional use in saltwater. Marine-grade proven durability: The cable has been designed to withstand the rigors of daily use as a boat lift system, dock hardware & other rigging use. The cable has an extreme resistance to abrasion, UV, and humidity. More Information Installation and use: The cable is easy to cut to your specification in seconds. It can be used with thimbles, cable clamps, or crimp sleeves. It is compatible with most common boat lift pulley designs, drive units, and winding configurations. Care and maintenance: To help the cable last, rinse with fresh water after use, especially when used in saltwater or brackish conditions. Store in a dry location when not in use, and inspect regularly for signs of wear, fraying, or corrosion.

$169.00

The 5/16×60 SS Cable is a top-quality stainless steel cable, engineered for strength, durability, flexibility, and longevity in extreme and challenging environments. The cable is a full 60-foot cable and consists of 7×19 wire. This cable is suitable for boat lifts, dock systems, and many more rigging applications from marine rigging and industrial uses. It was designed to suit conditions with moisture, tensile strength, corrosion resistance, and retain strength throughout natural marine conditions, particularly during a lifetime in saltwater or even outdoors. Main Features 5/16″ Diameter, 60′ Length: The cable offers a good strength-to-manageability ratio for a standard boat lift, rigging uses, or heavy-duty support elements. The 60-foot pre-measured section extends far enough for most applications without needing to add on. 7×19 stainless steel: The cable is comprised of 7 bundles of 19 wires, providing enhanced flexibility and fatigue resistance. In addition, the wire arrangement allows the cable to bend around pulleys and winch drums without kinking. 316 stainless steel design: This was constructed using quality 316 grade stainless steel, which contains molybdenum for excellent corrosion resistance – which, as a marine environment, is much more at risk in terms of saltwater or coastal elements. 316 grade stainless steel provides rust resistance, compatibility, and stain resistance, and does not require an excessive dry-down after repeated exposure to moisture. High load rating: This line is rated and designed to withstand high loads under tension. These shackles are fantastic for lifting, hoisting, and anchoring applications that require long-span sustained functionality. Marine-rated performance: This product has been designed to perform in extreme marine environments under submerged, salt-spray, and bright sunlight. This cable can be used in harsh exterior conditions and will perform all year round. Additional Information Installation and use: The cable comes cut or terminated as required and works fine with stainless steel thimbles, clamps, or swage fittings. Technically, it will work with most brands of boat lifts and dock systems. It will also easily route via sheaves, guide pulleys, or winding drums. Care and Maintenance: After exposure to salt water, rinse with fresh water to eliminate any further salt accumulation. Store the cable coiled and protected from the always looming elements to prevent degradation. Check the cable regularly for fraying, wear, and surface corrosion. Avoid kinks or sharp bends which could compromise cable strength.

$2.99

The Cable, 1/4 Gal by the Foot is a flexible, high-strength galvanized steel wire rope with a high degree of corrosion resistance and custom-length flexibility. It’s great to use in boat lifts, docks, hoists, and numerous rigging applications. This versatile cable is sold by the foot to accommodate your exact needs! The cables’ 7×19 construction provides an optimal combination of strength and flexibility, ensuring you can trust that they won’t fail when placed under tension, load, or movement. Key Features 1/4-inch galvanized steel wire rope: This medium-duty synthetic cable features a sturdy yet reasonable diameter, making it suitable for various marine and mechanical applications. Ideal for small to medium boat lifts, winches, and guidance systems. Sold by the foot for customized applications: Order what you need, whether you’re replacing old rigging or building a new system from scratch. We can supply any length of cable to help. Allowing you to buy by the foot limits waste and maximizes precision during the installation process. 7×19 flexible strand construction: This strand structure consists of 7 strands, each containing 19 wires. This type of construction has excellent bending capabilities and resistance to fatigue. It easily wraps around sheaves and pulleys without kinking or fraying. Hot-dip galvanized coating: The zinc coating provides protection against corrosion while the cable is in use. With its hot-dip galvanized coating, it is suitable for both freshwater and outdoor marine use (excluding saltwater). Hot-dip galvanized is not as corrosion-resistant as stainless steel, but it will hold up with proper care. Trustworthy performance in various marine environments: Designed for rugged outdoor use, this cable can withstand UV exposure, rain, and contact with water. Great for docks, lifts, and gear left outdoors. Additional Information Use and setup: This is a cut-to-length cable, which can be attached using cable clamps, eyelets, or crimp sleeves. By design, this will function well with the vast majority of standard winch/lift systems, and can be easily handled with hand tools during the setup. Care and Maintenance: After use in muddy or brackish conditions, rinse with fresh water to maintain maximum life. Store coiled and dry when not in use. Check regularly for wear or corrosion, and avoid too-tight bends to maintain flexibility and integrity.

$54.50

The GFCI Wire Harness is a safe and easy way to connect power to the boat lift system. This can provide ground protection for wet and marine environments. With the harness installed, you simply need to plug it in and go. It is pre-wired with a GFCI plug, so you can operate electrical power safely and efficiently near water. The harness is an easy and reliable solution for power safety at your shoreline when installing a new boat lift or upgrading an existing boat lift system. Key Features Built-in GFCI plug (110V): This harness has a built-in Ground Fault Circuit Interrupter plug. This will protect you from electrical shock hazards and is a must-have for all outdoor or waterfront electrical connections, especially in high-moisture environments. Pre-wired for plug-and-play convenience: This harness is ready to install with all the significant components already connected, so you can get your harness up and running sooner and with less hassle than if you had to wire the GFCI yourself. It’s literally as simple as plugging the harness into a GFCI-rated outlet and then your lift motor. Heavy-duty wiring with marine use: made of marine-grade and heavy-duty materials to endure the outdoor atmosphere, sunlight, and temperature changes. The wire is selected to allow your average boat lift motor to run safely. Designed for boat lifts: Specifically designed to be wired to suit typical boat lift applications. This harness is wired for safe connection to motors, switches, or controllers with electrical protection at the source. Flexible compatibility: Works with most boat lift systems that require 110V operation and is compatible with a variety of remotes and switch boxes, including BH-USA and other configurations. Additional Information Installation and use: Easy to install and use. Plug the GFCI harness into a US 110V outlet and connect the wires to your boat lift motor according to your system instructions. The outlet must always be GFCI protected to comply with safety regulations. The Safe-Lift is perfect for use in marina situations, dockside installations, and in residential waterfronts. Maintenance and Care: Check the wire harness regularly for wear and damage, especially after severe weather. Always keep the GFCI plug dry when not in use and test it monthly, using the built-in “Test” and “Reset” buttons. Ideally, the best approach is to keep the unit indoors when not in use for extended periods to prolong the product’s life.

$40.00

Dock Cleat | Open base “S” style 10 in. | Aluminum Anchorage | Black Powder-Coated | Long-lasting Mooring Solution Product Description As an excellent docking setup, you can select 10 in. Silver Aluminum S Dock Cleat, which is a perfect blend of durability, reliability, and style. Its corrosion-resistant aluminum s-type constriction coated with black powder has long-lasting performance to survive in harsh marine water conditions. The black finish not only gives a stylish look to the cleat body but also ensures the safety and reliability for anchorage for boats of all sizes. Its versatile design makes it a brilliant selection for anchoring your boats and decks for effortless and worry-free tie-ups. Key features S-Shaped Design: The S-type curved shape confirms a secure hold and makes it easy to tie up and similarly to release the dock line. Heavy-Duty Aluminum: The cast aluminum construction allows the cleat to resist the impact of harsh marine water. Black Powder-Coating: The black powder coating provides an elegant feel and durability to the cleat. Easy to Install: The two countersunk mounting holes help you to easily fasten the cleat for a secure fit. Additional information Installation: Once you find the required location to install the cleat, use it as a guide to mark the drilling points, then clean the holes and align them with the cleat holes properly. Then, fasten the cleat securely using appropriate bolts (to be purchased separately). Check its stability before anchoring the boat line. Care and Maintenance: Inspect the cleat bolts regularly for loosening or signs of wear. Do not use harsh acidic cleaners to maintain the smooth finish, and you can clean it with plain water, mild soap, and a soft brush to remove salt, dirt, and debris.