Hurricane Boat Lifts

$290.00

The Cable 3/8 x 65′ is a durable, stainless steel wire rope that has been designed to be strong, flexible, and should last a very long time in marine and industrial applications. The design of the cable considers ‘performance’ and ‘corrosion resistance’ while being a good selection for applications when flexibility and consistent tension and support must be maintained for long periods of time, such as boat lifts, dock rigging, or winching. The Cable 3/8 x 65′ has all of the properties of 7×7 construction as well as easy flexibility, and has all the corrosion resistance of stainless steel with the strength and integrity expected of marine applications. Key Features 3/8-inch diameter, 65-foot length: This size offers substantial tensile strength and provides ample reach. It is great for large lifts or tensioning projects. If you are buying a lift system for a full-size boat or setting up an extended configuration dock rigging, you can run the system with the rope without splicing it. 7×19 stainless steel material: This is constructed with 7 strands of stainless steel wire, each with 19 individual wires, allowing for a configuration that offers a large amount of flexibility while maintaining strength. It has great resilience to kinking and is easy to handle and bend, allowing you to wrap it around winches or pulleys. Available in 304 or 316 stainless steel: 304 stainless steel is suitable for general outdoor and marine use, offering good corrosion resistance and a breaking strength of up to 12,000 lbs. 316 stainless steel has the same alloying elements as 304, with the addition of molybdenum, which provides increased resistance to saltwater corrosion, making it more suitable for extreme marine applications. Durable marine-grade material: Designed to withstand rust, corrosion, and wear in saltwater and coastal environments. Excellent for boat lifts, mooring lines, railing systems, and rigging. Adaptable and flexible: easy to install, spool, and cut to length; works with clamps, thimbles, and eyelets for custom configurations. Additional information Installation/usage instructions: The cable can be cut and finished with wire rope clamps, thimbles or crimping sleeves, depending on your application. It is best to use stainless steel hardware to give you full corrosion protection. Always observe correct safety standards for load rating and installation methods. Care and maintenance: After use in saltwater rinse with fresh water to reduce build-up and prolong service life. Periodically check for signs of fraying, corrosion, or mechanical wear. Store the coiled cable in a dry place and avoid overstretching and bending to maintain its condition.

$3.22

The Cable 5/16 GAL per foot is a reliable, marine braided, galvanized steel cable. It offers the perfect blend of strength, durability, and versatility. It is an ideal cable for use in boat lifts, dock rigging, or many other marine applications you can depend on for support at a custom length. With 7×19 construction, this wire rope ensures high tensile strength while providing great flexibility to work in extreme waterfront conditions. Key Features 5/16-inch Galvanized Steel Cable: An industrial-grade cable at 5/16-inch diameter is a great load-carrying capacity while still being flexible enough to work in nearly all common styles of boat lift and marine rigging. Sold by the foot for custom applications: If you are only replacing one particular line or planning an entire lift system, you can buy this cable by the foot to ensure you have the exact lengths your unit requires, without waste and no need for guesswork. 7×19 flexible wire configuration: This wire cable is engineered to be flexible when used in pulleys, drums, and winches. The flexibility allows it to be used with some play; however, it is still strong enough to lift plenty of weight. Hot-dip galvanized coating: The hot-dip galvanizing is made of zinc, which is a coating that minimizes rusting and corrosion when used outdoors and with marine environments. It is not designed for use in salt water like stainless steel, and while it is acceptable in fresh water and limited period of salt water with regular maintenance, it is not designed for use in seawater or beyond occasional use in saltwater. Marine-grade proven durability: The cable has been designed to withstand the rigors of daily use as a boat lift system, dock hardware & other rigging use. The cable has an extreme resistance to abrasion, UV, and humidity. More Information Installation and use: The cable is easy to cut to your specification in seconds. It can be used with thimbles, cable clamps, or crimp sleeves. It is compatible with most common boat lift pulley designs, drive units, and winding configurations. Care and maintenance: To help the cable last, rinse with fresh water after use, especially when used in saltwater or brackish conditions. Store in a dry location when not in use, and inspect regularly for signs of wear, fraying, or corrosion.

$169.00

The 5/16×60 SS Cable is a top-quality stainless steel cable, engineered for strength, durability, flexibility, and longevity in extreme and challenging environments. The cable is a full 60-foot cable and consists of 7×19 wire. This cable is suitable for boat lifts, dock systems, and many more rigging applications from marine rigging and industrial uses. It was designed to suit conditions with moisture, tensile strength, corrosion resistance, and retain strength throughout natural marine conditions, particularly during a lifetime in saltwater or even outdoors. Main Features 5/16″ Diameter, 60′ Length: The cable offers a good strength-to-manageability ratio for a standard boat lift, rigging uses, or heavy-duty support elements. The 60-foot pre-measured section extends far enough for most applications without needing to add on. 7×19 stainless steel: The cable is comprised of 7 bundles of 19 wires, providing enhanced flexibility and fatigue resistance. In addition, the wire arrangement allows the cable to bend around pulleys and winch drums without kinking. 316 stainless steel design: This was constructed using quality 316 grade stainless steel, which contains molybdenum for excellent corrosion resistance – which, as a marine environment, is much more at risk in terms of saltwater or coastal elements. 316 grade stainless steel provides rust resistance, compatibility, and stain resistance, and does not require an excessive dry-down after repeated exposure to moisture. High load rating: This line is rated and designed to withstand high loads under tension. These shackles are fantastic for lifting, hoisting, and anchoring applications that require long-span sustained functionality. Marine-rated performance: This product has been designed to perform in extreme marine environments under submerged, salt-spray, and bright sunlight. This cable can be used in harsh exterior conditions and will perform all year round. Additional Information Installation and use: The cable comes cut or terminated as required and works fine with stainless steel thimbles, clamps, or swage fittings. Technically, it will work with most brands of boat lifts and dock systems. It will also easily route via sheaves, guide pulleys, or winding drums. Care and Maintenance: After exposure to salt water, rinse with fresh water to eliminate any further salt accumulation. Store the cable coiled and protected from the always looming elements to prevent degradation. Check the cable regularly for fraying, wear, and surface corrosion. Avoid kinks or sharp bends which could compromise cable strength.

$2.99

The Cable, 1/4 Gal by the Foot is a flexible, high-strength galvanized steel wire rope with a high degree of corrosion resistance and custom-length flexibility. It’s great to use in boat lifts, docks, hoists, and numerous rigging applications. This versatile cable is sold by the foot to accommodate your exact needs! The cables’ 7×19 construction provides an optimal combination of strength and flexibility, ensuring you can trust that they won’t fail when placed under tension, load, or movement. Key Features 1/4-inch galvanized steel wire rope: This medium-duty synthetic cable features a sturdy yet reasonable diameter, making it suitable for various marine and mechanical applications. Ideal for small to medium boat lifts, winches, and guidance systems. Sold by the foot for customized applications: Order what you need, whether you’re replacing old rigging or building a new system from scratch. We can supply any length of cable to help. Allowing you to buy by the foot limits waste and maximizes precision during the installation process. 7×19 flexible strand construction: This strand structure consists of 7 strands, each containing 19 wires. This type of construction has excellent bending capabilities and resistance to fatigue. It easily wraps around sheaves and pulleys without kinking or fraying. Hot-dip galvanized coating: The zinc coating provides protection against corrosion while the cable is in use. With its hot-dip galvanized coating, it is suitable for both freshwater and outdoor marine use (excluding saltwater). Hot-dip galvanized is not as corrosion-resistant as stainless steel, but it will hold up with proper care. Trustworthy performance in various marine environments: Designed for rugged outdoor use, this cable can withstand UV exposure, rain, and contact with water. Great for docks, lifts, and gear left outdoors. Additional Information Use and setup: This is a cut-to-length cable, which can be attached using cable clamps, eyelets, or crimp sleeves. By design, this will function well with the vast majority of standard winch/lift systems, and can be easily handled with hand tools during the setup. Care and Maintenance: After use in muddy or brackish conditions, rinse with fresh water to maintain maximum life. Store coiled and dry when not in use. Check regularly for wear or corrosion, and avoid too-tight bends to maintain flexibility and integrity.

$54.50

The GFCI Wire Harness is a safe and easy way to connect power to the boat lift system. This can provide ground protection for wet and marine environments. With the harness installed, you simply need to plug it in and go. It is pre-wired with a GFCI plug, so you can operate electrical power safely and efficiently near water. The harness is an easy and reliable solution for power safety at your shoreline when installing a new boat lift or upgrading an existing boat lift system. Key Features Built-in GFCI plug (110V): This harness has a built-in Ground Fault Circuit Interrupter plug. This will protect you from electrical shock hazards and is a must-have for all outdoor or waterfront electrical connections, especially in high-moisture environments. Pre-wired for plug-and-play convenience: This harness is ready to install with all the significant components already connected, so you can get your harness up and running sooner and with less hassle than if you had to wire the GFCI yourself. It’s literally as simple as plugging the harness into a GFCI-rated outlet and then your lift motor. Heavy-duty wiring with marine use: made of marine-grade and heavy-duty materials to endure the outdoor atmosphere, sunlight, and temperature changes. The wire is selected to allow your average boat lift motor to run safely. Designed for boat lifts: Specifically designed to be wired to suit typical boat lift applications. This harness is wired for safe connection to motors, switches, or controllers with electrical protection at the source. Flexible compatibility: Works with most boat lift systems that require 110V operation and is compatible with a variety of remotes and switch boxes, including BH-USA and other configurations. Additional Information Installation and use: Easy to install and use. Plug the GFCI harness into a US 110V outlet and connect the wires to your boat lift motor according to your system instructions. The outlet must always be GFCI protected to comply with safety regulations. The Safe-Lift is perfect for use in marina situations, dockside installations, and in residential waterfronts. Maintenance and Care: Check the wire harness regularly for wear and damage, especially after severe weather. Always keep the GFCI plug dry when not in use and test it monthly, using the built-in “Test” and “Reset” buttons. Ideally, the best approach is to keep the unit indoors when not in use for extended periods to prolong the product’s life.

$40.00

Dock Cleat | Open base “S” style 10 in. | Aluminum Anchorage | Black Powder-Coated | Long-lasting Mooring Solution Product Description As an excellent docking setup, you can select 10 in. Silver Aluminum S Dock Cleat, which is a perfect blend of durability, reliability, and style. Its corrosion-resistant aluminum s-type constriction coated with black powder has long-lasting performance to survive in harsh marine water conditions. The black finish not only gives a stylish look to the cleat body but also ensures the safety and reliability for anchorage for boats of all sizes. Its versatile design makes it a brilliant selection for anchoring your boats and decks for effortless and worry-free tie-ups. Key features S-Shaped Design: The S-type curved shape confirms a secure hold and makes it easy to tie up and similarly to release the dock line. Heavy-Duty Aluminum: The cast aluminum construction allows the cleat to resist the impact of harsh marine water. Black Powder-Coating: The black powder coating provides an elegant feel and durability to the cleat. Easy to Install: The two countersunk mounting holes help you to easily fasten the cleat for a secure fit. Additional information Installation: Once you find the required location to install the cleat, use it as a guide to mark the drilling points, then clean the holes and align them with the cleat holes properly. Then, fasten the cleat securely using appropriate bolts (to be purchased separately). Check its stability before anchoring the boat line. Care and Maintenance: Inspect the cleat bolts regularly for loosening or signs of wear. Do not use harsh acidic cleaners to maintain the smooth finish, and you can clean it with plain water, mild soap, and a soft brush to remove salt, dirt, and debris.

$25.00

Dock Cleat | Open base “S” style 10 in.| Cast Aluminum Anchorage | Silver Powder-Coated | Enduring Anchoring Solution Product Description Whether you are an occasional or professional boater, you cannot do without the 10-in. Silver Aluminum S Dock Cleat. It is a perfect blend of perfection, durability, reliability, and style. Made from best-quality and corrosion-resistant aluminum, this cleat is designed not only to survive in salt water conditions but also to continuously provide flawless performance. The elegant white powder finish makes the cleat aesthetically appealing and versatile anchorage for boats of all sizes. Key features S-Style Design: The unique S-type horns are there for a tight and secure hold for the mooring lines, facilitating easy tie-up for the oversized ropes. Corrosion-resistant Cast Aluminum: The cast aluminum body provides strength and has the capability to resist harsh marine conditions. Silver Powder Coating: The coating increases the toughness and durability and at the same time provides a smooth surface. Easy Installation: The proximity of the two mounting holes helps to bolt the cleat easily and avoid line snags and wearing of ropes. Additional information Installation: Once you find the required location to install the cleat, use it as a guide to mark the drilling points, then clean the holes and align them with the cleat holes properly. Then, fasten the cleat securely using appropriate bolts (to be purchased separately). Check its stability before anchoring the boat line. Care and Maintenance: Inspect the cleat bolts regularly for loosening or signs of wear. Do not use harsh acidic cleaners to maintain the smooth finish, and you can clean it with plain water, mild soap, and a soft brush to remove salt, dirt, and debris.

$40.00

Dock Cleat | Open base “S” style10 in. | Aluminum Anchorage | White Powder Coated | | Durable Anchoring Solution Product Description Enhance your boat anchoring using the 10 in. white power-coated cleat —a perfect combination of resilience, reliability, and elegance. Constructed from anti-corrosive cast aluminum with a protective white powder coating, this cleat is designed to withstand harsh marine conditions, delivering continuing performance for a longer duration. Key features S-type Design: The unique S-shaped horns offer a secure grip and simplify the process of looping and securing lines, adaptable for even thick ropes easily. Sturdy and Corrosion-resistant Aluminum Construction: The heavy-duty cast aluminum used for this cleat offers excellent strength and resilience for elongated performance. White Powder Coating: The white powder coating enhances the durability and provides a smooth and stylish surface. Recessed Mounting Holes for Easy Installation: The recessed mounting holes prevent rope/line snagging and fraying and ensure smooth and safe docking. Additional information Installation: Select a horizontal or vertical location on the boat/vessel as per your requirement. Mark the drilling holes on the surface of the installation with the help of the cleat holes. Remove the drilling dust and line up the cleat holes with the drilled holes. Secure the cleat with appropriate fasteners (bolts are to be purchased separately). Check the stability before anchoring the boat. Repair and Maintenance: Regularly check for loose and worn-out bolts. Avoid harsh cleaners and use plain water, mild soap, and a soft brush to remove scrap and residue from the surface of the cleat.

$28.00

Mooring Pile Cleat | 12 in. Plastic Anchorage | Black HDP UV-resistant Marine-grade Plastic | Durable Mooring Solution Product Description As a boater or sailor, you would love to organize your boat deck and firmly anchor it. The 12 in. The Black Plastic Mooring Pile Cleat is designed for durability and ease of use and is lightweight but equally durable to ensure safety. This cleat is an essential addition to your dock, marina, or waterfront property. All three – strength, durability, and convenience are combined in this 12-inch anchoring solution. Key Features Durable Design and Corrosion-Resistant – The high-strength, UV-resistant plastic used to manufacture the cleat can withstand harsh marine conditions and corrosion over time making it lightweight but sturdy. Suitable for both saltwater and freshwater use. Secure and Reliable Anchoring – The 12-inch length provides ample space for multiple dock lines that ensure a firm grip for boats of different sizes. Adaptable and Easy to Install – The pile cleat can be used for multiple applications, from securing dock lines to organizing ropes. Three pre-drilled holes facilitate quick and hassle-free mounting on pilings, docks, or seawalls. Low Maintenance – This pile cleat can sustain extreme weather conditions – heavy rains and intense exposure to the sun, with minimal maintenance. Additional Information Installation: Choose a stable mounting surface. Mark the drill holes and secure them with screws or bolts of appropriate marine-grade material (not included). Check the cleat before tying dock lines. Care and Maintenance: Inspect regularly for any loose bolt/fastener or signs of wear. Avoid overloading beyond its recommended capacity to maintain longevity

$47.50

Dock Cleat | Open base “S” style 12 in. | Corrosion-resistant Aluminum Anchorage | Black Powder Coated | Resilient Anchoring Solution Product Description Boost your boat or vessel docking with the 12 in. Black Power-Coated Cleat, which is a perfect combination of strength, durability, and sleek design. This cleat has a S-shaped horn curved design made from anti-corrosive cast aluminum. It is coated with a protective black powder. It is designed to withstand harsh marine water conditions and to perform for a longer duration. Key features S-Curve Design: The ergonomic design ensures a larger rope hold, preventing slippage and enhancing security in various docking conditions. Corrosion-resistant Aluminum Construction: The high-quality cast aluminum used for manufacturing the cleat gives exceptional strength and resilience. Sleek Black Powder-Coated Finish: The black powder coating enhances the weather resistance capability while adding to the professional look of your dock or boat. Recessed Mounting Holes for Easy Installation: The two oversized countersunk holes allow a seamless installation using a socket. It can be secured with either through bolts or lag bolts. Additional information Installation: For secure installation, choose a sturdy surface with a strong foundation. Place the cleat in the desired location and use a marker to mark the mounting holes. Drill the holes and use appropriate stainless-steel bolts or lag screws. Use standard cleating techniques with rope to ensure a firm and reliable mooring. Repair and Maintenance: Regularly check for loose and worn-out or rusted bolts. use plain water, mild soap, and a soft brush instead of harsh cleaners to remove dust and dirt.

$32.50

Mooring Cleat | Open base “S” style 12 in. | Cast Aluminum Anchorage | Silver Powder Coated | Dependable Docking Solution Product Description Augment your boat or vessel docking experience with the 12 in. Silver Powder Coated Cleat, is a strong, stylish, and reliable addition to your dock. Built from high-quality cast aluminum, it’s tough enough to handle harsh marine conditions while resisting rust and corrosion. The smooth white powder coating adds durability and gives your dock a modern, sophisticated look. The “S” shaped ergonomic design makes tying off your boat quick and easy. Key features S-Style Design: The unique S-type horns ensure a safe grip and effortless looping of anchorage lines. The shape of the creature easily accommodates even oversized ropes. Premium-Grade Corrosion-resistant Aluminum: The cleat is manufactured to resist the harsh sea water and hence is long-lasting and reliable. Sleek, Elegant White Coating: The white powder coating improves the looks and aesthetics and also prevents line wear and fraying over time. Easy and Hassle-free Installation: The two countersunk mounting holes are easy to bolt ensuring a firm grip for the safety and longevity of your ropes. Additional information Installation: Place the cleat on your dock location, positioning it in the pull direction. Mark and drill the mounting holes, and secure them with compatible bolts, firmly. Check with an appropriate load before starting to use it regularly. Repair and Maintenance: Regularly inspect the cleat for wear, corrosion, or loosening, clean with a mild cleansing agent and water, and tighten the loose bolts on time.

$16.00

Docking Pile Cleat | 12 in. Plastic Anchorage | White HDP UV-resistant Marine-grade | Sturdy Anchoring Solution Product Description As a boater or sailor, maintaining and organizing your boat deck is as essential as firmly anchoring it for a smooth and safe experience on the water. Hence, this piling cleat is a vital addition to your boat accessories. This cleat is resilient, durable, and effective as an excellent anchoring device. Key Features Simple Design and Anti-Resistant – The enduring, UV-resistant plastic body, with simple but light-weight but sturdy design has the ability to sustain in harsh marine conditions. Firm and Resilient Anchoring – The piling mount cleat with a length of 12-inches can accommodate multiple dock lines with a firm grip for boats of different sizes. Versatile and Hassel-free Installation – The three pre-drilled holes are placed strategically to ensure quick and easy mounting on the surface of boats and vessels. Negligible Maintenance – The plastic body of this pile cleat has the ability to sustain in all types of weather conditions with negligible maintenance efforts. Additional Information Installation: Once you have selected the mounting surface, mark it for the drilling holes. Drill the holes and clean the surface before securing the pile mount cleat with appropriate screws or bolts (not included). Check to ensure that it is firmly bolted, and then tie the dock lines. Maintenance: Regularly examine the pile mount cleat and tighten or replace any loose or rusted bolt/fastener.

$47.50

Anchoring Cleat | Open base “S” style12 in. | Cast Aluminium Anchorage | White Powder Coated | Sturdy Anchoring Solution Product Description Boost your boat anchoring experience using the 12 in. white power-coated cleat —a perfect blend of functionality and style for your docking needs. Designed to provide a secure tie-up point, this cleat ensures your vessel remains safely anchored, even in harsh marine conditions. Constructed from anti-corrosive cast aluminium with a protective white powder coating, it delivers continuing performance for a longer duration. Key features User-Friendly S-Shape: The s-shaped design enables easy looping of boat lines, allowing for quick and secure tie-offs. Sturdy Aluminium Construction: The heavy-duty cast aluminium used for this cleat offers excellent strength and resilience for elongated performance. White Powder Coating: The white powder coating enhances endurance and provides an even and smooth surface. Cross-angled Mounting Holes for Easy Installation: The strategical mounting holes prevent rope/line snagging and fraying and ensure smooth and safe docking. Additional information Installation: Select a horizontal or vertical location on the boat/vessel as per your requirement. Mark the drilling holes on the surface of the installation with the help of the cleat holes. Remove the drilling dust and line up the cleat holes with the drilled holes. Secure the cleat with appropriate fasteners (bolts are to be purchased separately). Check the stability before anchoring the boat. Repair and Maintenance: Regularly check for loose and worn-out bolts. Avoid harsh cleaners and use plain water, mild soap, and a soft brush to remove scrap and residue from the surface of the cleat.

$17.50

Mooring Pile Mount | 12 in. Wooden Anchorage | Premium Pressure-treated Yellow Pine | Durable Tie-up Solution Product Description Enhancing the boat line organization is as important as the anchoring. Hence you as a boater or sailor would admire the 12 in. Wood Piling Mount. It is crafted for resilience and accessibility. It is durable and dependable even though it is lightweight. This pile mount is an indispensable addition to your marine depository. Balancing the three qualities – strength, durability, and convenience this 12-inch anchoring solution is a must-have for you. Key Features Durable Design and Robust Construction: Made from premium pressure-treated yellow pine. The robust structure offers exceptional strength and resistance to environmental conditions. Secure and Reliable Anchoring – The 12-inch length provides sufficient space to accommodate multiple dock lines and also facilitates a steady grip for boats of all sizes. Flexible and Easy to Install – The pile mount can accommodate multiple applications, from locking dock lines to organizing ropes. The pre-drilled holes facilitate fast and easy mounting. Minimal Maintenance – This pile mount is made for durability and has the capability to effortlessly resist severe weather. Additional Information Installation: Choose a stable mounting surface. Mark the drill holes and secure them with screws or bolts of appropriate marine-grade material (not included). Check the cleat before tying dock lines. Care and Maintenance: Inspect regularly for any loose bolt/fastener or signs of wear. Avoid overloading beyond its recommended capacity to maintain longevity

$55.00

Dock Cleat | Open base “S” style15 in. | Aluminum Anchorage | Black Powder Coated | | Durable Anchoring Solution Product Description Enhance your boat anchoring using the 15-inch black powder-coated cleat —a perfect combination of resilience, reliability, and elegance. Constructed from anti-corrosive cast aluminum with a protective white powder coating, this cleat is designed to withstand harsh marine conditions, delivering continuing performance for a longer duration. Key features S-type Design: The unique S-shaped horns offer a secure grip and simplify the process of looping and securing lines, adaptable for even thick ropes easily. Sturdy and Corrosion-resistant Aluminum Construction: The heavy-duty cast aluminum used for this cleat offers excellent strength and resilience for elongated performance. Black Powder Coating: The black powder coating enhances the durability and provides a smooth and stylish surface. Recessed Mounting Holes for Easy Installation: The recessed mounting holes prevent rope/line snagging and fraying and ensure smooth and safe docking. Additional information Installation: Select a horizontal or vertical location on the boat/vessel as per your requirement. Mark the drilling holes on the surface of the installation with the help of the cleat holes. Remove the drilling dust and line up the cleat holes with the drilled holes. Secure the cleat with appropriate fasteners (bolts are to be purchased separately). Check the stability before anchoring the boat. Repair and Maintenance: Regularly check for loose and worn-out bolts. Avoid harsh cleaners and use plain water, mild soap, and a soft brush to remove scrap and residue from the surface of the cleat.

$40.00

Mooring Cleat | Open base “S” style 15 in. | Aluminum Anchorage | Silver Powder Coated | Robust Anchoring Solution Product Description Enhance your boat or vessel docking with the 15 in. silver powder-coated aluminum boat cleats, which is a perfect combination of strength, durability, and sleek design. This cleat has a S-shaped horn curved design made from rust-proof cast aluminum. The cleat is coated with a protective silver powder. It is designed to withstand harsh marine water conditions, to perform for a longer duration. Key features of Aluminum Boat cleats S-Style Design: The exclusive S-type-shaped horns ensure a safe grip and effortless looping of anchorage lines. The shape of the creature easily accommodates even oversized ropes. High-quality Corrosion-resistant Aluminum: The cleat is made from high-quality aluminum to resist the harsh sea water and hence is long-lasting and reliable. Smooth Silver Coating: The silver powder coating gives a smooth finish enhancing the aesthetics of the cleat that prevents damage and fraying the rope over time. Easy Installation: The two recessed mounting holes make it easy to bolt on the docking surface and ensure a steady grip for the safety and longevity of your ropes. Additional information Installation: Position the cleat, align mounting holes, secure with compatible bolts, and loop mooring lines around the S-horns for a firm hold. Use standard cleating techniques with rope to ensure a firm and reliable mooring. Repair and Maintenance: Regularly inspect your cleat for wear or corrosion. Rinse with fresh water after exposure to salt and debris, using a mild detergent for stubborn stains. Check and tighten mounting bolts, replacing any corroded bolts.

$55.00

Mooring Cleat | Open Base “S” style 15 in. | Aluminum Anchorage | White Powder Coated | | Sturdy Anchoring Solution Product Description A reliable and stress-free anchorage is what you need for your boat. Hence, the 15 in. White Powder-Coated Aluminum S-Cleat is the decisive solution for you to dock your boat safely. The powder coating safeguards the cleat body in the salt water. It supports your docking needs seamlessly through its smooth S-shaped design Key features S-type Design: The S-type curved shape confirms a secure hold and makes it easy to tie up and similarly release the dock line. Strong and Corrosion-resistant Aluminum Body: The cleat is made from high-quality cast aluminum that gives it strength and resilience. White Powder Coating: The coating provides a smooth, sophisticated surface and durability to the cleat. Easy Installation: The recessed mounting holes help to avoid the line weathering and to easily fasten the cleat for a secure fit. Additional information Installation: Once you have selected the mounting spot on the boat, mark holes to drill on the surface and drill the holes, wipe off to remove the debris, then align the cleat holes and secure them with appropriate bolts. Check the stability before anchoring the boat. Repair and Maintenance: Inspect the cleat bolts regularly for loosening or signs of wear. Do not use harsh acidic cleaners to maintain the smooth finish, and you can clean it with plain water, mild soap, and a soft brush to remove salt, dirt, and debris.

$20.00

Docking Cleat | Open base “S” style 8 in. | Nylon/Aluminium Anchorage | Black Coating | Sturdy Anchoring Solution Product Description Boost your boat anchoring experience using the 8 in. Black Nylon Cleat —a perfect blend of functionality and style for your docking needs. Premeditated to provide a secure tie-up point, this cleat ensures your boat remains safely anchored, even in harsh marine conditions. Constructed from anti-corrosive cast aluminium with a protective white powder coating, it delivers continuing performance for a longer duration. Key features Simple S-Shape: The s-type design allows easy looping of boat lines for quick and secure tie-offs. Sturdy Aluminium Construction: The heavy-duty cast aluminium used for this cleat offers excellent strength and resilience for elongated performance. Black Powder Coating: The white powder coating enhances the durability and provides an even and smooth surface. Oblique Mounting Holes for Easy Installation: The strategic mounting holes prevent rope/line snagging and fraying and ensure smooth and safe docking. Additional information Installation: Select a horizontal or vertical location on the boat/vessel as per your requirement. Mark the drilling holes on the surface of the installation with the help of the cleat holes. Remove the drilling dust and line up the cleat holes with the drilled holes. Secure the cleat with appropriate fasteners (bolts are to be purchased separately). Check the stability before anchoring the boat. Repair and Maintenance: Regularly check for loose and worn-out bolts. Avoid harsh cleaners and use plain water, mild soap, and a soft brush to remove scrap and residue from the surface of the cleat.

$195.00

Tie-Up Cleat | Open base “S” style10 in. | Cast Aluminium Anchorage | Metallic White | Sturdy Anchoring Solution Product Description Anchor or dock your boat safely using the EZ 10 in. Aluminium Tie-Up Cleat. It is one of the premium mooring solutions made for strength, reliability, and long-lasting performance. Crafted from high-quality cast aluminium, this aluminum cleats is manufactured to bear the harshest water and weather conditions and consider larger dock lines. It offers exceptional corrosion resistance in both freshwater and saltwater environments. Key features of Aluminum Cleats Heavy-duty S-shaped Design: The unique S-shaped horns offer a secure grip and simplify the process of looping and securing lines, adaptable for even thick ropes easily. Heavy-Duty Aluminium Construction: Made from corrosion-resistant aluminium for long-lasting performance Smooth Metallic Finish: Prevents rope wear and fraying, extending the life of your docking lines while offering a sleek, polished look. Grooved Mounting Holes for Easy Installation: Pre-drilled grooves/holes for hassle-free mounting on docks, decks, or boats. Additional information Installation: Arrange the aluminum cleat in the desired docking spot, mark the drilling holes with a marker, drill the holes, align them properly with the holes, and secure them with suitable fasteners (to be purchased separately). Tie your boat using a cleat hitch or similar knot. Regularly inspect for wear and re-tighten as needed for safety. Repair and Maintenance: Maintain the durability by rinsing the cleat with fresh water to clean the debris and scrap. Inspect it regularly for loose bolts or corrosion. Avoid harsh cleaners and use plain water, mild soap, and a soft brush to remove scrap and residue from the surface of the cleat.

$115.00

The FENDER FA 201 – Floating Dock Screw On Fender 10ft is a durable, impact-resistant fender for dock and boat protection. It is a 10ft fender specifically made for floating dock and provides extended cushioning to the boat from bumps, scrapes, and wave action. Easy to install and built for marine environments, it will keep your dockside protected year after year. Key Features Continuous 10-foot length: The FA 201 fender is a one-piece, 10-foot fender that provides uninterrupted fendering without gaps, leaving your dock or boat vulnerable to impact damage. The FA 201 fender is perfect for your long, straight runs of floating docks or berthing areas experiencing high-volume traffic. Heavy-duty construction: The FA 201 fender is made from a high-quality marine-grade vinyl and is designed for heavy-duty usage. The unit is UV-stabilized, non-marking, and can withstand the elements of sun, salt water, and water levels that differ from spring to neap tides and environmental conditions. FA 201 model for floating dock systems: The FA 201 is specifically designed to work with floating dock systems. It flexes with the water movement and maintains consistent boat protection without pulling apart or deforming. Attachment just by screwing onto the dock edge. More successfully, mount a long-lasting and secure fitting without having to check or re-do anything frequently. Integrated air pocket design: Inside the fender, there is an area/cavity filled with air that creates a buffer, “shock absorber”, that functions to cushion, control, and absorb impact without impacting the original fender shape and integrity. This helps protect hulls and dock surfaces, even in the roughest waters. Additional Information Installation and use: Place the fender along the edge of your floating dock where boat engagement occurs. Secure the fender using stainless steel screws or bolts at regular intervals to make it flush and tight. This fender is suitable for use on any residential or commercial floating dock systems. Maintenance: Regular cleaning using mild soap and water will remove dirt, algae, and debris from your deck. With our composite material, after exposure to saltwater, rinse with fresh water to reduce potential corrosion or damage to the surface. Check fasteners regularly to ensure they remain tight, especially after heavy storms.

$211.00

The Fender Support Bracket, 1up-1down, is a heavy-duty aluminum bracket designed to mount dock fenders above and below the dock edge. With flexibility and strength in mind, this dual-sided bracket system provides maximum fender protection by allowing you to install fenders in an “up and down” mounting block, ideal for variable water levels and docking larger vessels. Key Features Dual-position design (1 up, 1 down): Allows for the mounting of the fender in two directions (one above the dock and one below), providing full side coverage and optimal impact absorption for a wider range of boats and waterline positions. Heavy-duty aluminum frame: It is constructed from marine-grade aluminum, which gives supreme support at unbelievably low weight. It means that even when in contact with saltwater and exposure brackets will not bend, degrade, warp, or corrode. Precisely welded frame: The bracket utilizes heavy-duty welds in the length-wise direction to ensure that area is structurally sound. Capable of accommodating repeat impacts on the dock, tidal activity, and heavy docking in busy marinas. Pre-drilled for installation: The bracket comes pre-drilled, allowing you to fasten it securely to wooden or composite dock pilings. Standard stainless steel fasteners are sold separately. Low-profile height: The bracket is designed to be flush with the dock mechanism, minimizing tripping hazards and enhancing the consistent, professionally looking layout of your entire waterfront docking system. Additional Information Method of Installation and Use: Place the mounting bracket on the dock face in the area where fender coverage is warranted. Mount with stainless steel hardware for corrosion resistance and durability. Insert fenders into the upper and lower arms of the bracket, allowing coverage for both the top edge of the dock and the submerged areas on both sides of the dock. Very useful for fixed docks; ideal for commercial waterfronts and private marina use. Care and Maintenance: Inspect the corroded clamps, loose fasteners, and misalignment if any. Especially after every storm. If exposed to saltwater, make sure to rinse with freshwater so they maintain a clean look. Whenever needed, retighten bolts, screws, and clamps.

$42.50

The 10X10 Boat Fender Corner (White or Black) is a marine-grade, high-impact fender that guards at-risk dock corners from boat impacts. When maneuvering in tight slips or with tidal movements, this fender provides cushioning precisely where you need it most, right at the pier edge. The 10X10 Boat Fender Corner is available in either white or black for protective, yet clean dock-side aesthetics. Key Features 10″ x 10″ corner coverage: Corner floats harbor protection and total coverage at crucial 90-degree dock parties. Corner floats wrap the sides of the corner to help prevent hull damage while angled or direct contact occurs. Marine grade construction: Built with high-quality UV-resistant polyethylene or vinyl (differs by stock), the fender absorbs shock, and is resistant to cracking, dents, and fading over time with constant sun and water exposure. Available in white or black: Choose from two popular franchise colors to match from dock aesthetic or visibility preferences. Both fitments are non-marking and can be easily cleaned on a regular basis to maintain a sharp pro-quality. Universal fit and design: Fits on virtually any floating or fixed dock made of wood, metal, or composite. The flexible material does flex just a bit to fit tightly with your dock, thus providing protection that won’t warp. Quick to install: Some mounting holes are already formed, or a smooth surface (depends on model) allows quick attachment to your dock with stainless steel fasteners or heavy-duty adhesive (not included). Additional Information Assembly and Usage: Position the dock corner fender at the corner of the dock and secure it in place using corrosion-resistant screws or bolts. Offering a premium treatment, combined with straight dock fenders along the sides for full perimeter protection. Applicable for residential dock applications or commercial marina/waterfront facilities of all types. To care and maintain: Rinse down with fresh water every now and then to get rid of salt, grunge, or algae build up. Always clean with mild soap to maintain the fender. Periodically check for any cracks or loosened fasteners, particularly after storms or after heavy docking.

$180.50

Keep the dock clean and store hoses with this Hose Holder w/Spigot Powder Coated – White. Constructed from heavy-duty aluminum and finished with a powder coating that resists marine corrosion, this functional accessory is designed for long-lasting durability. The spigot is made from brass, making it reliable for water delivery wherever you are, to combine utility with sleekness. Washing the boat or rinsing gear-this hose holder comes as a blend of convenience, durability, and dockside efficiency. Features Marine-Grade Durability: Built from heavy-duty aluminum with a thick powder-coated finish, it withstands the harsh conditions of saltwater without rusting or chipping over time. Built-in Brass Spigot: This integrated brass spigot is corrosion-resistant. It is designed to ensure a vigorous flow of water, perfect for rinsing on the dock and boat repairing. Hose Storage: An oversized, open hook-style holder allows the hose to be kept coiled neatly and within easy reach, thereby avoiding tangles and trip hazards. Fitting: This unit is pre-drilled with the mounting holes, and you can quickly mount it to a dock piling or a wall with mounting tools. Additional Information: Installation and Use: A second hose holder for a residential dock, marina, or boathouse should be considered for aesthetics and functionality. It has dockside water use for seasonal strength, with a very sturdy built-in spigot that allows for considered use. Care & Maintenance: Rinse off with fresh water after exposure to salt or debris. Occasionally, use a mild soap and soft cloth to wipe it down to brighten. Use silicone lubricant spray as needed on the spigot for smooth use.

$210.00

The Boat Hose Holder w/Spigot Powder Coated – Black serves to organize your space in a sleek way. It is removable and made of marine-grade aluminum and powder-coated black to resist the weather. It organizes your hose and has a spigot attached to it. A great addition to a marina, dock, or waterfront property that needs function and style. Key Features Hose storage and spigot combination: Saves space by keeping the hose hanging and providing an access point for nozzles, Billy Bailey, or power washing. The boat hose holder spigot always allows you to rinse off your boat, gear, or dock quickly. Also, this product keeps your hose fastened to the wall and out of the way. Heavy-duty aluminum: Constructed from superior-quality, rust-resistant aluminum, it easily handles marine-based applications. The product will not bend, break, or corrode due to the sun, spray, or salt. Powder-coated black finish: Not only does the modern black finish look professional and sleek, it will also give the unit UV protection above and beyond performance. The powder coat is also resistant to chipping, peeling, and fading over time. Large capacity holder: Store a standard marine or garden hose snugly, therefore eliminating tangling or overdressing. It is also perfect for busy docks or high traffic areas that could utilize hose organization. Easy to mount: Easily mounts to posts, pilings, or dock walls, with common fasteners (not included). Our spigot connector is compatible with standard hoses for universal application. Additional Information Installation and use: Attach to any solid, vertical surface with your own stainless screws or bolts (hardware not included). Connect a water supply to the back of the valve for instant dock-side water. Perfect for rinsing boats, cleaning fish stations or filling water tanks. Care and Maintenance: Occasionally rinse to loosen salt or debris. Wipe the finish with fresh water and a mild cleaner to keep it nice. Inspect the valve for leaks or clogging and tighten fittings as necessary.

$96.00

As a mariner, you must be taking utmost care of your GEM control system and must be working hard to extend its lifespan. The GEM door can help you in this endeavour, which is not only easy to install. It is perfect for a rugged environment and is reliable as well. It shields the internal wiring and circuitry of your GEM control system from water, spray, dust, and debris. Key Features & Benefits Marine‑grade durability: The door is made from high-quality, marine-grade plastic that can withstand harsh sunlight, salty water, and chemical spray.. Reliable & Cost-effective: The door is perfect to enhance the safety and longevity of your GEM control system at a very reasonable cost. Replacing just the door makes it an affordable alternative over replacing the entire control unit cover. Effortless Installation: The door just needed to be pressed on to the hinges of the GEM control boxes as there is no screw required. It covers the internal electrical components and saves them from dust, moisture, and debris. Installation and Usage Clean the control box hinges and align the door hinges with those of the control box, and then press down gently till you hear a click sound to lock it. Maintenance Apply mild soap and rinse the door with fresh water to keep it clean. Wipe it off using a soft cloth to dry it. Regularly inspect the door for cracks and replace it if needed.

$60.00

The GEM Faceplate (Newer) is a direct replacement cover for updated GEM remote control boxes, constructed of durable weather-resistant material. The faceplate provides clean protection from the elements for standard GEM internal components while ensuring easy visibility and labeling for all of your controls. This faceplate is the perfect replacement for the GEM lift control system when the original faceplate looks worn down, cracked, or faded. Key Features Modular design for newer GEM systems: Made specifically for GEM remote control boxes made in the last few years to match updated housing types and screw placements. Durable construction: Manufactured from high-impact, weather-resistant plastic that can withstand UV rays, saltwater, and the typical wear and tear of dock life. Pre-cut panel: The panel has cutouts aligned for the GEM toggles and indicator light (switches not included), which makes it a suitable plug-and-play replacement without any modification. Easily identifiable: The clean face design with clearly marked switch locations makes it easy for users to operate their lift safely and confidently. Sleek, clean look: This will give a refreshed and professional look to tired, abused GEM control boxes, great for dock upgrades or replacements. Additional Information Installation and use: Unscrew the old faceplate from the control box and remove it. Line up the GEM Faceplate (newer) with your box and screw it on using compatible parts. Inspect the cutouts for the switch and light to ensure they align before tightening. Compatibility note: This faceplate is intended for GEM remotes from the latest generations (the remote body features a rounded edge). It will not work with older remotes that may have different sizes or switches. Check the model you have before buying it. Care and Maintenance: Wipe off with fresh water and a non-abrasive, soft cloth to remove any salt or debris. Do not use cleaners that are excessively harsh and may affect the printing or surface quality of the faceplate.

$49.99

As a mariner, you can convert your existing manual system to an advanced auto-stop system, ensuring precise control and enhanced safety for your boat lift operations. This transformation will not only give you freedom of movement but also safe operation. You will never regret this upgrade for precise auto-stop functionality and experience the best in boat lift technology. Key Features & Benefits Perfect Upgrade Kit: The kit has all the essentials included in it, like durable upgrade wires, cord grip, clear installation manual. The manual has detailed limit-setting instructions that make the kit a perfect and hassle-free system Seamless Compatibility: The adaptable design allows it to integrate effortlessly with GEM remote controls and electrical boxes, and hence, it is ideal for enhancing existing setups. Better Safety & Precision: The kit can be set with accurate limit adjustments, allowing you to control the lift stops, and it also has improved wire gripping reliability. Durability : The marine-grade material of the kit system makes it robust and long-lasting even under saltwater exposure, harsh marine weather, and killing UV rays. Installation and Usage Remove the old wires from the GEM box, attach the new K-wires, and use the cord grip to adjust the tension of the wires. Calibrate and synchronise the remote functions. Ensure to follow the instructions in the included manual. Maintenance Rinse the wires with fresh water, and if required. Wipe off to keep the wires dry. Inspect the fraying of the wire regularly. Retighten or replace as needed.

$199.00

The GEM Receiver Board with Auto Stop is a replacement circuit board designed explicitly for GEM brand boat lift remote systems. In addition to standard remote operation, it features Auto Stop for better control and safety, which automatically stops the lift at designated locations. This is the best solution for replacing or upgrading high-end GEM control systems and board-lift operations that are automated and run smoothly. Features: GEM remote systems replacement: Compatible with GEM brand boat-lift remotes and transformers. Auto Stop: Automatically stops the lift at its upper and lower pre-programmed limits. Prevents overwinding and excessive mechanical wear and tear. Easy installation: Simply plug it in and replace your existing GEM systems with no rewiring or complex changes. Safety and accuracy have improved: Auto-stop automates the lift and safety features, providing limited operator involvement in operation and thereby preventing operator error. Strong reception: The remote control unit features a robust wireless connection, enabling seamless operation without lag. Additional Information Installation & Use: Ensure that the power to the GEM Control Box has been removed before replacing the board. Use the remote to remove the old receiver board and replace it with the new one. Follow the wiring instructions as outlined in the user’s guide. Turn the power back on and check the Auto Off functions using the remote. Care & Maintenance: Maintain a clean, dry (sealed) control box. You should also check the board for dirt, moisture, corrosion, and loose wires. Clean the contacts if there is loose debris, and replace them if there is significant corrosion. Do not completely submerge it or expose it directly to moisture or excessively humid conditions.

$299.99

The Gem stand is a heavy-duty aluminum gazebo that mounts on the dock and securely holds your GEM remote control or switch box. If you need to keep a GEM lift controller off the dock and up and out of the way, the GEM controller stand is a practical solution in any marine environment. This Stand will provide reliability, ease of use, organize your lift controls, and allow your lift controller to keep it within arm’s length. The stand is durable and designed to be compatible with any DUI GEM lift controller, whether single-motor or dual-motor. The stand is made of powder-coated aluminum, suitable for the toughest marine conditions. Key Features Dock-mountable control stand: The GEM controller is at a comfortable ergonomic position. Installation is neat, and professional access to the remote near your dock or lift is easy. Heavy-duty aluminum construction: The stand is built from marine-grade aluminum. Durable structure offers strength and resistance to corrosion. Use in freshwater or saltwater environments! Pre-drilled mounting holes: Pre-drilled holes make it easy to install a GEM control stand on most docks. Just bolt it down and place the remote controller firmly on the stand with the slots! Powder Coated finish: Provides an additional layer of protection from the outdoors while maintaining a clean and streamlined look. They withstand heavy sun exposure, rain, and extended time around waterfronts. Stabilized single-post design: The weighted base and vertical post provide stable, upright positioning without the quirk of tipping or wobbling. It brings your remote off the dock, beautifully out of splash zones. Additional Information Installation and Use: Attach your mounting stand to your dock using the included stainless steel hardware (not included). Compatible with conventional GEM remote control boxes. Simply align the control box with the mounting plate, tighten it in place, and wire it in accordance with the manufacturer’s instructions. Care and Maintenance: As needed, wipe with a damp cloth. Check regularly that the mounting hardware remains snug and that no corrosion has started at the junction. Rinse off any saltwater with freshwater to maintain the powder-coated finish.

$49.00

The Boat GEM Transformer is a high-quality, marine-rated power transformer that delivers an easy and reliable low-voltage power source for GEM brand remote control systems on boat lifts. Built to tolerate the dockside environment, so it can safely convert standard voltage AC power into the low-voltage currents needed to operate GEM controllers. If you are replacing an existing GEM Transformer or building a completely new system, this low-voltage transformer will perform and last. Features Compatible with GEM remote systems: The Boat GEM Transformer has been explicitly designed to power the GEM-brand remote control units for boat lifts. Power conversion from AC to low-voltage DC: The Boat GEM Transformer converts 110V or 220V AC power directly to low-voltage DC output, powering GEM controllers and safely controlling a boat lift. Weather-resistant: The sealed housing is both weather-resistant and corrosion-resistant, making it suitable for use in float, dock, or marine applications. Operational reliability and safety: It protects the remote system’s reliability during voltage fluctuations that could disrupt reliable current flow. Perfect replacement or upgrade: Your GEM remote control systems can be restored to their original value and performance more quickly than you think. Additional Information Installation and Usage: The transformer must be installed in a dry area that is not prone to water. The transformer should be installed as close as possible to your GEM control box for optimal power distribution. Always follow the manufacturer’s installation instructions for connecting to your power supply. All electrical connections must have water-tight protection and must be grounded at all times. Exercise caution, remember, it is electricity. Follow the applicable safety protocol and always turn off the power in the area where you are working. Care and Maintenance: The unit should be examined for excessive wear, as rust or corrosion on the transient surfaces or connector surfaces is a sign of wear. You should maintain a clean and dry surrounding area while using the unit. With that said, avoid exposing your transformer to water spikes and submerging the transformer in water. If any of your transformer wiring or connectors are affected or damaged, resolve the issue prior to using it on the rail.

$799.00

If you are a fan of seaside parties and planning to have a fish cleaning station installed on your deck, the Seaward Half Cabinet is a must for you. It will help you to protect your fishing equipment. The Half Cabinet is a compact and, hence, a great marine-grade storage solution that can be integrated seamlessly with various Seaward’s docking and deck systems. Key Features Compact and Modular Design: Being half in size, the cabinet is compact as well as perfect for dockside areas with smaller space. It can be paired with larger Seaward systems and is modular that ensuring easy integration into new or existing setups, without sacrificing the required storage capacity. Marine-Grade Durability: Built for seawater, the cabinet is made from marine-grade aluminum. The 316 stainless steel hardware for installation, along with the nylon washers, enhances the corrosion protection, ensuring long-lasting performance in saltwater environments. Weather-Resistant & Customizable Finish: Designed to withstand saltwater, the cabinet has weather-resistant powercoating that gives a smooth and enhanced finish to it as well. Additional Information Installation: Install the cabinet with the help of the included SS hardware and the nylon washers. The Nylon washers prevent electrolysis between different types of metals. Care and maintenance: Conduct regular inspections of wear and tear of the hardware and the powder coating. For cleaning, simply wipe off the deposits with a soft fiber cloth. Do not use acid-based cleansers and tighten the fasteners regularly.

$400.00

Seaward Sink is made from premium stainless steel. It has excellent durability for versatile usage and all kinds of environments. The SS used to manufacture the sink is not only corrosion-resistant but also offers an elegant finish. The edges and corners of the sink are finished to perfection. The recessed drain hole makes it easy to fit the drain hose. Key Features Heavy Duty Stainless Steel: The stainless steel sheet of 1mm thickness makes the sink body corrosion resistant as well as robust for use in any type of environment, particularly in marine conditions. Polished Finish with Smoothened Edges: The finish helps to minimize the glare of the skin surface and does not let the water stains survive on it, and the smoothened edges and corners let you handle it without brushing your hands at the time of installation. Optimized Drain Design: The recessed drain hole of standard size allows smooth drainage and simplifies your waste disposal needs, if installed with compatible marine strainers or macerators Additional Information Installation: Adjust and align the flat flanges as per the installation location (undermount/overmount) below or above the counter/table top. Use the mounting hardware to mount the sink on/below the counter and seal the gaps around the edges of the flanges with the marine-grade silicone sealant. Use a strainer or macerator units compatible with the drain holes for drainage. Care and maintenance: Ensure to do regular inspections of wear and tear of the hardware, drain pipe, and the sealing of the flanges, and tighten or replace the hardware if needed. To keep the sink clean, just wipe off the deposits with a soft fiber cloth,

$1750.00

Adding this Fish table would be a great choice for you if you want to have an effortless and efficient fish-cleaning experience. The size of 23 in. x 50 in., this fishing station is made to keep the avid anglers in focus. Your post-fishing experience would definitely be astonishing with this durable and stylish station. The umbrella holder ensures shade and comfort on sunny and rainy days. Four legs and their placement provide stability and durability to the structure. Corrosion-resistant powder coating not only gives a smooth finish to the frame but also makes it durable. Key Features Large and Wide Table Platform: The wide table, with a fixed perforated tray, makes it easy for you to work comfortably. Resilient Structure : The marine-grade aluminum frame with an exclusive corrosion-resistant coating ensures sustainability in harsh marine Smoothened Corners: The rounded sides and smoothened corners of the table top protect you from scratching your hands on the table edges while working. Slopped Table top and Side Perforations: Sloped surface and perforated drainage channels help you to keep the table area clean and dry while working. Accessories: The drink holder, knife holder, and umbrella holder make your task convenient. Additional Information Installation: The station can be mounted on any flat surface. Once you have selected the site of installation, attach and legs to the frame using the stainless steel bolts and washers. Install the umbrella tube into a pre-drilled mounting slot or the umbrella holder and tighten the screws. You also have an option to permanently dock the table through the anchor feet on the installation location. Care and Maintenance: Clean the salt and debris regularly with fresh water. Inspect the bolts/fasteners regularly and address the loose and rusted ones as required. Do not use acid-based cleaners. Store in a cool and dry place when not in use.

$990.00

The fish table featuring four legs and a size of 23 in. x 50 in. would be a great choice for you if you want to have an effortless and efficient post-fishing experience. This fishing station is made to keep the avid mariners in focus. Your fish-cleaning experience would definitely be astonishing as this fishing table is durable, sturdy, and stylish. Four legs and their placement provide stability and durability to the structure. A corrosion-resistant metallic surface not only gives a smooth finish to the frame but also makes it durable. Key Features Large and Wide Table Platform: The wide table, with a fixed perforated tray, makes it easy for you to keep your equipment reachable and work comfortably. Tough and Reliable Structure : The marine-grade aluminum frame with an exclusive metallic finish ensures sustainability in harsh marine Smoothened Corners: The rounded sides and smoothened corners of the table top protect you from scratching your hands on the table edges while working. HDPE Table top and Side Perforations: The table is made from marine-grade plastic with a sloped surface and perforated drainage channels that help you to keep the table area clean and dry while working. Accessories: The drink holder, knife holder, and umbrella holder make your task convenient. Additional Information Installation: Select a flat surface and just place the table. The table is free-standing and hence does not require any mounting. Care and Maintenance: Clean the salt and debris regularly with fresh water. Inspect the bolts/fasteners regularly and address the loose and rusted ones as required. Do not use acid-based cleaners. Store in a cool and dry place when not in use.

$3120.00

Adding this Fish table would be a great choice for you if you want to have an effortless and efficient fish-cleaning experience. The size of 24 in. x 48 in., this fishing station is made to keep the avid anglers in focus. Your post-fishing experience would definitely be astonishing with this durable and stylish station. The umbrella holder ensures shade and comfort on sunny and rainy days. Four legs and their placement provide stability and durability to the structure. Corrosion-resistant powder coating not only gives a smooth finish to the frame but also makes it durable. The colorful canvas roof with vibrant colour options will give you overhead protection from sunlight as well. Key Features Large and Wide Table Platform: The wide table, with a fixed perforated tray, makes it easy for you to work comfortably. Resilient Structure : The marine-grade aluminum frame with an exclusive corrosion-resistant coating ensures sustainability in harsh marine Smoothened Corners: The rounded sides and smoothened corners of the table top protect you from scratching your hands on the table edges while working. Slopped Table top and Side Perforations: Sloped surface and perforated drainage channels help you to keep the table area clean and dry while working. Versatile Canopy: The overhead awning is made with canvas fabric in attractive colors to match your aesthetic preferences. Accessories: The drink holder, knife holder, and umbrella holder make your task convenient. Additional Information Installation: The station can be mounted on any flat surface. Once you have selected the site of installation, attach and legs to the frame using the stainless steel bolts and washers. Install the umbrella tube into a pre-drilled mounting slot or the umbrella holder and tighten the screws. You also have an option to permanently dock the table through the anchor feet on the installation location. Care and Maintenance: It is super easy for you to maintain this upscale fish station. Just keep it clean and free from salt and debris with fresh water. Inspecting the bolts/fasteners, pipe/hose, etc., regularly and addressing the loosened and rusted ones is also required to upkeep the setup. It is advisable to remove the roof/shade during stormy and windy weather.

$75.00

How about you pursuing your fish cleaning jobs while maintaining the comfort of shade during rain and sunshine? This aluminum umbrella holder will give you a chance to work comfortably even in rain and sunshine. Your post-fishing experience would definitely be astonishing with this umbrella holder. This versatile umbrella holder, matched to your fishing table, is easy to install. Corrosion-resistant marine-grade aluminum not only gives a smooth finish to the holder but also makes it durable. Key Features Marine-Grade Aluminum Structure: The marine-grade aluminum frame with an exclusive corrosion-resistant quality ensures sustainability in harsh marine Versatile Compatibility: It is designed to be compatible with all the frequently purchased fishing tables. Effortless Installation: It is very easy and quick for installation with pre-drilled holes for fasteners Additional Information Installation: Before purchasing the umbrella holder, check its compatibility with your fishing table. Position it on the pre-drilled holes of the table and secure it with stainless steel screws. Once it is done, slide the umbrella pole on the holder and ensure it is fitted properly, and then tighten the knob as required. Care and Maintenance: It is super easy for you to maintain this holder. Just keep it clean and free from salt and debris with fresh water. Inspecting the bolts/fasteners regularly and addressing the loosened and rusted ones is also required to upkeep the setup.

$94.00

If you want to beat the heat and need protection from UV exposure during long days at the dock, and at the same time, stay cool and comfortable. This powder-coated aluminum umbrella holder will fulfill all these needs and will give you a chance to work comfortably even in rain and sunshine. Your post-fishing experience would definitely be astonishing with this umbrella holder. This versatile umbrella holder, matched to your fishing table, is easy to install. Corrosion-resistant powder-coated marine-grade aluminum not only gives a smooth finish to the holder but also makes it sturdy and robust. Key Features Powder Coated Marine-Grade Aluminum Structure: The marine-grade aluminum frame with corrosion-resistant powder coating gives an exclusive quality to ensure sustainability in harsh marine Versatile Compatibility: It is designed to be compatible with all the frequently purchased fishing tables. Effortless Installation: It is very easy and quick for installation with pre-drilled holes for fasteners Additional Information Installation: Before purchasing the umbrella holder, check its compatibility with your fishing table. Position it on the pre-drilled holes of the table and secure it with stainless steel screws. Once it is done, slide the umbrella pole on the holder and ensure it is fitted properly, and then tighten the knob as required. Care and Maintenance: It is super easy for you to maintain this holder. Just keep it clean and free from salt and debris with fresh water. Inspecting the bolts/fasteners regularly and addressing the loosened and rusted ones is also required to upkeep the setup.

$749.00

Adding the Fish Table with Single Pedestal would be a great choice for you if you want to have an effortless and efficient fish-cleaning experience, and at the same time, need an installation-free option of a fishing table. This fish station is made to keep the avid anglers in focus who look for a pick and move on to the next location for fishing, or want to fix the table at the location of their choice. Your post-fishing experience would definitely be astonishing with this durable and stylish station. It has unmatched durability, hygiene, and convenience. Key Features Wide Table Platform: The wide table provides ample room for cleaning large fish without clutter and to work comfortably. Resilient Structure : The marine-grade aluminum frame with an exclusive corrosion-resistant white coating ensures sustainability in harsh marine 360-Degree Rotating Pedestal Mount: The pedestal, made from anodized aluminum base, allows you to rotate the table 360 degrees very smoothly. Accessories: The provision of a knife slot for holding the knives makes your task convenient. Additional Information Installation: The station can be mounted just placed or mounted using the square flange base and the SS fasteners. Maintenance: Clean the salt and debris regularly with fresh water. Inspect the bolts/fasteners, pipe/hose, etc., regularly and address the loose and rusted ones as required.

$820.00

Adding the Fish Table with Single Pedestal would be a great choice for you if you want to have an effortless and efficient fish-cleaning experience, and at the same time, need an installation-free option of a fishing table. This fish station is made to keep the avid anglers in focus who look for a pick and move on to the next location for fishing, or want to fix the table at the location of their choice. Your post-fishing experience would definitely be astonishing with this durable and stylish station. It has unmatched durability, hygiene with water connection, and convenience, along with a user-friendly design. Key Features Wide Table Platform: The wide table provides ample room for cleaning large fish without clutter and to work comfortably. Resilient Structure : The marine-grade aluminum frame with an exclusive corrosion-resistant white coating ensures sustainability in harsh marine 360-Degree Rotating Pedestal Mount: The pedestal, made from anodized aluminum base, allows you to rotate the table 360 degrees very smoothly. Integrated Water Hose System: The provision of a water connection makes your fish cleaning experience hygienic, easy, and efficient. Accessories: The provision of a knife slot for holding the knives and water hose makes your task convenient. Additional Information Installation: The station can be mounted just placed or mounted using the square flange base and the SS fasteners. Install the water hose on the given water connection slots/taps. Maintenance: Clean the salt and debris regularly with fresh water. Inspect the bolts/fasteners, pipe/hose, etc., regularly and address the loose and rusted ones as required.

$14.25

Maintaining and protecting the metal surfaces, electrical connections, engine components, and fasteners, subject to salt spray and high humidity, will be easy with CRC marine heavy-duty corrosion inhibitor. To protect and keep the metal surfaces and components rust-free for long-lasting protection, it is possible with the corrosion inhibitor. It is a must addition to your maintenance routine Key Features Long-lasting Protection: The film or coating created by the corrosion inhibitor provides long-lasting protection by sealing out the surface from moisture, salt, air, and other corrosive elements. It prevents rust and corrosion over extended periods. ​ Thin-Durable Coating: The 2-mil waxy, flexible, dry, and yellowish translucent film protects the surface from cracking or crazing, ensuring continuous protection . ​ Additional Information Application: Clean the surface to make it free from rust, old paint, or debris and dry it thoroughly. Shake the can well before use. Spray it from a distance of approximately 6-12 inches on the designated surface. Apply overlapping layers to create an even layer. Leave for 2- 4 hours in a place with mild temperatures, low humidity, and no dust. Store the container with the remaining liquid upright, tightly sealed, and away from direct sunlight and moisture. Storage: Store the container with the remaining liquid upright, tightly sealed, and away from direct sunlight and moisture.

$24.00

Adding CorrosionX Grease to your maintenance kit is quite a good decision. It is a premium, multi-purpose grease that provides great lubrication. It also provides great performance in high-resistance and gives corrosion protection. Corrosion X Marine Grease is multipurpose and ideal for applications in marine, industrial, and automotive equipment. As compared to similar products, CorrosionX Grease provides better and long-term protection from moisture and friction to the metal components, thereby extending their life. Key Features Long-lasting Corrosion Protection: The grease is made using advanced Polar Bonding technology that sticks to the metal surface and acts as a shield against moisture, salt water, and harsh chemicals. It also reduces the wear and tear of component friction through its protective layer. Waterproof, Heat-Resistant, and Non-Melting Formula: The grease provides protection even in high temperatures. It doesn’t melt or break down easily. It won’t wash away even in saltwater conditions. Heavy-Duty, Multi-Purpose Application: The Corrosion X Marine Grease is ideal for equipment and components bearing heavy loads and friction due to speed, such as wheel bearings, industrial machinery, marine equipment, and construction vehicles. The molecules of the grease stick for a longer time to the surface and protect it to ensure friction reduction and smooth operation Additional Information Application: Clean the surface to make it free from rust, old paint, or debris, and dry it thoroughly. Apply the required amount of grease to create a thick layer. moisture. Check periodically and reapply as needed. Storage: Store the container with remaining grease upright, tightly sealed, and away from direct sunlight and moisture.

$29.25

Including CorrosionX Spray Lube in your maintenance kit will ensure the longevity and reliability of your equipment for optimal performance even in harsh conditions. It is a premium, multi-purpose, long-lasting corrosion prevention compound manufactured to protect and preserve metal surfaces, electrical connections, and moving components. The spray slows down the corrosion process and also removes the existing rust. Key Features Hi-Performance Corrosion Protection: Made with advanced Polar Bonding technology shields the surface against moisture, saltwater, and harsh chemicals. It also reduces the wear and tear of components friction through its protective layer. Waterproof, Heat-Resistant and Non-Melting Formula: The grease provides protection even in high temperatures. It doesn’t melt or break down easily. It won’t wash away even in saltwater conditions. Heavy-Duty, Multi-Purpose Application: The CorrosionX spray lube is ideal for a wide range of environments, including marine, automotive, industrial, and household settings (sheaves, hinges, locks, cable/wire rope). The flexible and dry film protects the surface from cracking or crazing, ensuring continuous protection. The spray prevents electrolysis between dissimilar metals in electronics. Additional Information Application: Clean the surface to make it free from rust, old paint, or debris and dry it thoroughly. Shake the can well before use. Spray it from a distance of approximately 8-12 inches on the designated surface. Apply overlapping layers to create an even layer. Leave for 2- 4 hours in a place with mild temperatures, low humidity, and no dust. Storage: Store the container with the remaining liquid upright, tightly sealed, and away from direct sunlight and moisture.

$749.00

As a mariner, you always look for a dedicated space to keep your essential gear, personal belongings, and other equipment organized and protected from the harsh marine environment. The Dock Box will be your new favorite companion. It is made from robust fiberglass and can prove to be a spacious storage solution that is designed to elevate your waterfront lifestyle. Key Features Sturdy Fiberglass Walls: The box walls are made from 3/18 in. thick heavy-duty fiberglass sheet walls. Though it ensures sustainability in a harsh marine environment, it keeps the box lighter in weight. UV-Resistant White Gel-Coating: The gel forms a protective layer that resists fading, ensures easy cleaning, and maintains a glossy, bright look for the box season after season. Stainless-Steel Hardware: SS is used in the hinges, fasteners, and latches that give long-lasting performance in salt or freshwater environments. Huge Box Volume: The size of the box is big enough and offers sufficient space for marine equipment like life jackets, tackle boxes, pool toys, dock equipment, and more, while enabling you to keep things on your dock tidy and accessible. Additional Information Maintenance and Usage: Regularly rinse and wipe off the saltwater and dirt using a soft cloth and mild soap, keeping that gel-coat intact. To preserve the UV-resistant finish and avoid any sun damage, ensure to apply marine-grade wax as and when required. Check the hinges, fasteners, and latches at a regular interval, preferably annually— tighten any loosening fasteners to ensure smooth operation. Follow the weight capacity and wall strength, and do not overload it.

$16.00

Invest in Lucas Red N Tacky grease and add it to your maintenance kit for stress-free corrosion protection. It is a top-quality, multi-purpose grease that provides great lubrication. It also provides great performance in high-resistance and gives corrosion protection. Lucas Red N Tacky grease is a multipurpose grease ideal for applications in marine, industrial, and automotive equipment. As compared to products in a similar category, Lucas Red N Tacky provides better and long-term protection from water and friction to the metal components to extend their life and performance. Key Features Long-lasting Corrosion Protection: The grease is made using advanced technology stuck to the metal surface and acts as a shield against moisture, saltwater, and harsh chemicals. It also reduces the wear and tear of components through its protective layer. Waterproof, Heat-Resistant and Non-Melting Formula: The grease provides protection even in high temperatures. It doesn’t melt or break down easily. It won’t wash away even in saltwater conditions. Heavy-duty, Multi-Purpose Application: The grease is ideal for equipment and components bearing heavy loads and friction due to speed, such as wheel bearings, industrial machinery, marine equipment, and construction vehicles. Similarly, ideal for household settings such as sheaves, hinges, locks, and cable/wire rope. The molecule adhesion for a longer time to the surface and protects it to ensure friction reduction and smooth operation Additional Information Application: Clean the surface to make it free from rust, old paint, or debris, and dry it thoroughly. Apply the required amount of grease to create a layer. Check periodically and reapply as needed. Storage: Store the container with remaining tacky grease upright, tightly sealed, and away from direct sunlight and moisture.

$17.50

Including Premium Dielectric grease in the maintenance routine kit for longevity and reliability of your electrical connections. It is a top-quality, silicone-based grease specifically manufactured to protect the electrical components to enhance their performance. Key Features of Marine Dielectric Grease Long-lasting Corrosion Protection: The marine dielectric grease protects the dielectric surfaces through its advanced adhesion and bonding technology. It gets stuck to the surface and acts as armor against moisture, salt water, and harsh chemicals. It also reduces the wear and tear of components by electrolysis of its protective layer. Waterproof, Heat-Resistant, and Non-Melting Formula: The marine dielectric grease provides protection in both marine environments and high-temperature. It doesn’t dissolve or wash away easily even in saltwater conditions. High-performance, Multi-usage Application: The grease is ideal for electric connections and components in marine environments, automotive systems, and other settings where they are exposed to harsh conditions. Likewise, it is ideal for household settings like sheaves, hinges, locks, cable/wire rope, etc., for smooth operation. Additional Information Application: Clean the surface to make it free from rust, old paint, or debris, and dry it thoroughly. Apply the required amount using a clean applicator or gloved finger in a small amount to avoid excessive application and prevent accumulation. Check periodically and reapply as needed. Do not apply with bare hands. Storage: Store the container with remaining grease upright, tightly sealed, and away from direct sunlight and moisture.

$2422.00

Brake & Motor Combo is the right investment choice if you want a motor that is made to deliver long-lasting performance and seamless boat lifting operation with precision braking. The reliable torque and strength required to handle demanding lifting applications are the specialty of this motor. It can sustain the hardest environment to enable you to fulfil the operations easily. It is an unregrettable and smart investment in scenarios of upgrading an existing boat lifting system or replacing an old motor, if you are doing so. Key Features Robust Power Output: It can deliver powerful and efficient operation, and is also perfect for medium-duty applications in marine environments. Marine Grade Cast Iron Housing: It is manufactured to be rust and corrosion resistant in all types of water with the help of cast iron casings. Smooth & Silent Operation: It is precisely assembled for smooth and noise-free operation to minimize vibration. Integrated Safety Brake: The integrated braking system with the motor helps to instantly stop and hold loads securely, keeping you safe. This feature helps if there is a sudden power loss or emergency conditions. Compatibility: The combo is suitable for marine ramps, dockside elevators, and other lifting systems demanding precision braking. Additional Information Maintenance and Usage: Regularly inspect for signs of rust, loose bolts, or electrical wear as suggested. Rinse off debris and deposited salt with freshwater to keep the motor clean. Ensure all the wiring remains sealed and dry for electrical safety. Disconnect and store in a weather-protected location.

$75.00

Protection of your boat’s surface helps to extend the life of your trailer bunks, and it is done by the high-quality Bunk Carpet Piece. It is made for ensuring durability, performance, and a smooth glide. While you are loading or unloading, this marine-grade carpet is there to keep your boat safe from scratches. The carpet is also perfect for covering the worn bunk and still appearing stylish. As a boat owner, it offers a long-lasting solution for you. secure. Key Features Marine-Grade Durability: The carpet has the ability to withstand harsh sun rays, saltwater, and repeated rugged use. It does not fray or deteriorate easily. Protective Surface: The carpet acts as a cushion to protect your boat’s surface from scratches, scuffs, and abrasions. Non-Abrasive Backing: The carpet is soft and gentle on the gel-coated and painted boat surfaces, providing a snug, secure fit. Easy to Fit: The carpet is made from flexible but strong fiber, hence it is simple to cut and fit around the boat bunks. Additional Information Installation and Usage: Before installing the carpet, ensure that to remove the old carpet and clean the surface thoroughly. Cut the carpet piece according to the required length and then wrap it firmly around the board. Remove the sags to ensure even coverage. Seal and secure it with the help of stainless steel staples or carpet nails. Care and Maintenance Guidelines: Rinse the carpet with fresh water to remove saltwater and prevent buildup. Allow the bunks to dry to avoid mold or mildew before spreading the carpet. Regularly, check for wear of staples and nails and re-secure if needed. Replace the carpet if there is significant fraying or thinning visible.

Contact for price

$249.00

The Flushmaster 2 Outlet 3’ Hose is a useful and time-saving tool because it’s able to flush two outboard engines at the same time. The Flushmaster product is built for easy and effective installation and also comes with two hoses to get the most for flushing out your engine. Flushing helps prevent salt, sand, and buildup from your engine after each use. The 3-foot hose is compact, and the fittings are durable. Flushmaster helps streamline your routine maintenance and can help prolong the life of your engine. Key Features Dual connection: Enables the flushing of twin outboard motors using a single source of water, saving you time and hassle in post-run maintenance. Comes with two 3′ hoses: Compact hoses ensure that things remain tangle-free and avoid extra material. Each hose contains 3′, which is plenty of length for side-by-side motors and maximum efficiency. Extra durable: Made from only the highest quality hose materials and corrosion-resistant fittings, designed for many repeated freshwater flushes in a marine environment. Fast and easy setup: Connect your garden hose to the center inlet and then connect either two outlet hoses to the flushing port or muffs for each motor. This will work for most dual-engine boats. Even water pressure: Since both motors will receive an equal water flow, the internal rinse will be correct to rinse salt or other contaminants. Additional Information Setup and Usage: Connect the main inlet to a standard garden hose. Attach each 3′ hose outlet to the flush connections on your engines or the flush muffs. Turn on the water and let the system operate for the recommended flushing duration. Normally, this takes 5-10 minutes for each motor – great for emergency maintenance at the dock or in the driveway. Care and Maintenance: Rinse your hose with fresh water after use and make sure it is completely dry before stowing. Routinely, inspect the hose ends and fittings for wear or corrosion. When storing your hose, coil it and keep it in a dry, shaded location to extend its lifespan.

$287.99

Boat engine flushing is easy and seamless for dual-engine boats with the Flushmaster kit for single or twin outboards. The hassle of engine maintenance is gone with this flushmaster. It works very fast and cleanses the engines thoroughly so that you can store them without tension, ensuring that when you use them back with optimal performance Features of Flushmaster Kit Dual-hose design: Two hoses eliminate the hassles of swapping the hose for both engines, hence it is a time-saving investment for you. High-grade plastic hose: Durable and flexible hoses made from high-grade plastic are easy to detangle, hence making the handling smooth. GHT quick-connect fittings: Standard garden hose type quick-connect fittings for the hose are easy to secure and leak-free. Water-conservation: Systematic and streamlined flow of water not only saves water but also gives perfect and quick cleansing to the engines. Easy operation and monitoring: Single-press On/Off and Start/Stop functionality, along with functionality to set the flushing time. You can reset the time to start afresh or increase or decrease the timing. The monitoring panel helps you to easily monitor the flushing time and battery level of the device. Additional Information Installation and usage: Once you have selected the mounting spot on the dock or boat, mount the Flushmaster TM to connect both the hose using the quick-connect fittings. Press the On/Off button to turn on or turn off the flushmaster. Use the Start/Stop buttons to start or stop the water supply. You can set the time for flushing using the set button and reset to start afresh. or increase or decrease the flushing time. Ensure that you flush the engine for 5-10 min. or as per the engine manufacturer’s recommendation. Once the work is complete, disconnect the hose, drain it and store the unit. Care and Maintenance: Rinse the hose with fresh water after each use to remove salt and debris. Store in a dry and covered location to increase the longevity of the device and hose. Remove the batteries when the device is not in use. Regularly check the connectors and tighten or replace them as required.

$312.49

Regardless of your level of experience, it’s critical to ensure your outboard engines survive a long time and perform at their peak. By offering a comprehensive solution for efficient and hassle-free outboard flushing, the Flushmaster TM with single or twin outboards of 7 ft. length. It is fast and botheration-free and cleans the engines thoroughly to ensure optimal performance of it. Features Two-outboard design: The two water hose outlets make the cleaning swapping free and time-saving. HDPE plastic hose: The versatile and highly durable thermoplastic polymer used to manufacture the hose makes it flexible and durable for ease of detangling. Standard quick-connect fixtures: GTH type attachment for quick-connection, ensuring an easy-to-secure and leak-free Water-efficient: Streamlined water flow ensures water conservation and efficient cleaning of the engines. Monitoring and operation: Soft touch buttons are given to operate the flushmaster device – On/Off and Start/Stop, and Set/Rest to set and reset the timing, and buttons to increase and decrease the timing. The monitoring panel helps you to easily monitor the flushing time and battery level of the device. Additional Information Installation and usage: Once you have selected the mounting spot on the dock or boat, mount the Flushmaster to connect both the hoses using the quick-connect fittings. Press the On/Off button to turn on or turn off the flushmaster. Use the Start/Stop buttons to start or stop the water supply. You can set the time for flushing using the set button and reset to start afresh. or increase or decrease the flushing time. Ensure that you flush the engine for 5-10 min. or as per the engine manufacturer’s recommendation. Once the work is complete, disconnect the hose, drain it, and store the unit. Care and Maintenance: Rinse the hose with fresh water after each use to remove salt and debris. Store in a dry and covered location to increase the longevity of the device and hose. Remove the batteries when the device is not in use. Regularly check the connectors and tighten or replace them as required.

$624.99

Bigger boats need 4 engines, and hence flushing these engines may not be easy without an efficient flushing device. Flushing your engines will be easy and seamless with the Flushmaster TM for quad outboards. The hassle of engine cleaning is gone with the 4-outlet 12-foot Flushmaster. It works very fast to clean the engines thoroughly so that you can move ahead with your next trip or store the engines without any stress, ensuring optimal performance. Features Four-hose outlets: Four-hose outlets remove the hassles of swapping the hose for each of the four engines, saving you time spent on cleaning each engine individually. High-quality marine grade plastic hose: Durable, flexible, and 12 ft. hoses made from high-grade plastic are easy to detangle, hence making the handling smooth. Quick-connect attachments: Standard garden hose type quick-connect fittings for the hose are easy to secure and leak-free. Water-efficient: Systematic and streamlined flow saves water and makes a perfect stream for quick cleaning of the engines. Easy operation and monitoring: Single-press On/Off and Start/Stop functionality, along with functionality to set the flushing time. You can reset the time to start afresh or increase or decrease the timing. The monitoring panel helps you to easily monitor the flushing time and battery level of the device. Additional Information Installation and usage: Once you have selected the mounting spot on the dock or boat, mount the Flushmaster TM to connect both the hose using the quick-connect fittings. Press the On/Off button to turn on or turn off the flushmaster. Use the Start/Stop buttons to start or stop the water supply. You can set the time for flushing using the set button and reset to start afresh. or increase or decrease the flushing time. Ensure that you flush the engine for 5-10 min. or as per the engine manufacturer’s recommendation. Once the work is complete, disconnect the hose, drain it, and store the unit. Maintenance: Rinse the hose with fresh water after each use to remove salt and debris. Store in a dry and covered location to increase the longevity of the device and hose. Remove the batteries when the device is not in use. Regularly check the connectors and tighten or replace them as required.

$549.99

Larger boats require four engines; therefore, without effective flushing equipment, flushing these engines may be difficult. The FlushmasterTM for quad outboards will make flushing your engines simple and smooth. The 5-foot, 4-outlet Flushmaster eliminates the trouble of engine cleaning. It works quickly to completely clean the engines so you can store them stress-free or go on your next journey, assuring peak performance. Features Quad outboards: Four-hose outboards save you from the labor of swapping the hose for each of the four engines and also save the time you spent cleaning each engine separately. High-quality grade plastic hose: Tough, flexible, and 5 ft. hoses made from high-grade plastic are easy to untangle, hence making the handling smooth during the cleaning process. Quick-connect attachments: Standard garden hose type quick-connect fittings for the hose are easy to secure and leak-free. Water-efficient: Systematic and streamlined flow saves water and makes for a perfect stream for quick cleaning of the engines. Easy operation and monitoring: Single-press On/Off and Start/Stop functionality along with touch buttons to set the flushing time. You can reset the time or increase or decrease the timing. The monitoring panel helps you to easily monitor the flushing time and battery level of the device. Additional Information Installation and usage: Once you have selected the mounting spot on the dock or boat, mount the Flushmaster TM to connect both the hose using the quick-connect fittings. Press the On/Off button to turn on or turn off the flushmaster. Use the Start/Stop buttons to start or stop the water supply. You can set the time for flushing using the set button and reset to start afresh. or increase or decrease the flushing time. Ensure that you flush the engine for 5-10 min. or as per the engine manufacturer’s recommendation. Once the work is complete, disconnect the hose, drain it, and store the unit. Care and Maintenance: Rinse the hose with fresh water after each use to remove salt and debris. Store in a dry and covered location to increase the longevity of the device and hose. Remove the batteries when the device is not in use. Regularly check the connectors and tighten or replace them as required.

$159.99

The Lift Mate Outdoor Wi-Fi Camera helps you to keep a vigilant eye on your property and or other operations or activities as you can monitor efficiently. The Lift Mate gives you a precise, detailed view with the help of crystal-clear 1080p HD video and advanced night vision. You can view the activities of the surroundings, as this camera is capable of real-time remote surveillance from miles away. This camera device is easy to install, flexible to mount, and sends smart alerts to your mobile. This camera can remain functional 24/7, all year, and in all types of weather due to its robust construction. Key Features Crystal-clear HD video: With the help of a wide-angle lens, it captures a broader range of view and delivers clear, sharp HD footage even in very low light which is must when you need to keep a close eye on the surroundings. Remote Surveillance via Mobile App: Stream live video or playback the recorded one using the Life Mate app that is compatible with both iOS and Android mobile devices, enjoying the remote surveillance. Data Storage: Footages can be stored either on the cloud or on local data storage as per your choice. Water-resistant Casing: Casing of the remote is made from marine-grade plastic, which is weather resistant and hence shields the enclosed components from sunlight and harsh weather. Material and Construction: Waterproof casing guards the camera against both dust and water, enabling it to be used in harsh environments. Night Vision: 24/7 security for clear monitoring with infrared LEDs to enhance visibility up to 6 ft during nighttime. Easy Installation: Installation is as easy as mounting, connecting, and streaming after applying a preloaded unique activation code after integrating with the app. Additional Information Installation and Usage: Choose the appropriate location, install the mounting bracket, and secure the camera on the bracket. Connect the camera to the adapter and the adapter to a 12V DC power source. Download the Life Mate App from the play store, enter your unique activation code to link the camera to your account on the play store. Make the setting as per your choice and test the video recording and storage. Care and Maintenance: Wipe off regularly with a soft cloth to keep the camera lens clean. Regularly check and maintain the electrical connections. Update the app as and when available for optimal performance and storage of data. Remove and store the camera safely during extreme weather conditions such as hurricanes or storms, if needed.

$499.00

Forget the usual boat lifting hassles—lift mate boat lift device turns the chore into something almost effortless. This smart little controller makes managing your boat lift feel natural, right from your smartphone. Whether you’re gliding out onto open water or pulling into the dock for the day, it gives you a blend of safety, control, and ease that’s hard to ignore. In most cases, it just makes everything simpler without all that extra fuss. Overall, Lift Mate blends smart technology with practical design, giving you a relaxed way to keep your boat lift under control, almost like having an extra set of hands on your deck. Key Features Smartphone App Control: You can run your boat lift with the handy Lift Mate app on both iOS and Android. It’s simple to start, stop, and adjust settings wherever you may be. Bluetooth and Wi-Fi Connectivity: Bluetooth mode can be used to access a limited location, whereas you can switch to Wi-Fi mode for greater distance, and gives you flexibility. Auto-Stop Feature: Set up the top and bottom limit variations to prevent any mishaps like overwinding or motor damage due to winding strain. Secure Access Sharing: You can easily and securely share to grant family, friends, or marina staff access with personalized user permissions. Real-Time Lift Status: With live updates, you always know where your lift is positioned, keeping you in the loop throughout your day. Compact- Weatherproof Design: Built to brave harsh marine conditions, its rugged and waterproof casing stands up to the elements even if things get a bit rough. Additional Information Installation and Usage: Download and install the lift mate boat lift application from the Apple Store or Google Play Store. It is available for free. You need to install the controller with the mounting hardware in the package. Once the device is installed and connected to the app on your mobile, you can set the boat lift’s upper and lower limits in the app. Use the four touch buttons to manage and control the lifting and rigging operations. Care and Maintenance: To keep your Lift Mate working well, clean the controller to remove salt or dirt. Every few months, check if the wiring and mount are tight. Remember to update your app to get the newest features, and when you’re not using the lift for some time, turn off the unit to make it last longer.

$499.00

1.5 HP C-Face Boat Motor in Stainless Steel is made for a tough marine environment and making your motorised operations easy. It is not only high performance but also long-lasting and reliable. 1.5 hp boat motor can be deployed for various applications, such as boat lifting, if you are a mariner. Either you can upgrade your boat-lifting system or replace the old aging motor with this powerful boat motor. This could be your safest and smartest investment as a mariner. Key Features & Benefits of 1.5 Horsepower Outboard Motor Heavy-Duty Power Output: The 1.5 horsepower outboard motor can facilitate both medium to heavy-duty boat lifts. Stainless Steel Housing: The SS is ideal for saltwater and can stand firm against rust and corrosion, even in saltwater zones. Smooth & Quiet Operation: The precise and balanced assembly of the internal components of the motor has minimal vibration and hence gives smooth and noise-free operation. TEFC Enclosure (Totally Enclosed Fan Cooled): The enclosure is designed to protect the internal components from the external environment, thereby increasing the life of the motor and ensuring consistent operation. Easy Installation: The C-Face mount design is compatible with almost all the flat-plate hoist systems/gearboxes, which simplifies mounting and saves time and labor costs. Installation and Usage Pre-Installation: Check the compatibility of your hoist system for the C Face motor. Wiring should be for 115V or 230V, based on your dock’s power supply. Engage or consult a licensed electrician for safety. Installation: Align the flanges with the gearbox and use the appropriate-sized bolts for mounting and securing. Connect with the power source. Usage : Ensure to conduct a dry run to check the rotation direction and smooth operation. Maintenance Regularly inspect for signs of rust, loose bolts, or electrical wear as suggested. Rinse off debris and deposited salt with freshwater to keep the motor clean. Ensure all the wiring remains sealed and dry for electrical safety. Disconnect and store in a weather-protected place when the motor is not being used.

$489.99

1.5 HP C-Face Boat Motor in Stainless Steel casing- wired at 208V is built to perform in the hardest environment to enable you to fulfill the operations easily. It has high performance and is durable with reliable. You can deploy it for various applications, particularly for boat lifting, if you are a mariner. It is an unregrettable and smart investment in scenarios of upgrading and existing boat lifting systems or replacing an old motor. Key Features & Benefits Heavy-performance Power Output – Easy boatlift for medium to heavy loads through 1.5 hp power. Stainless Steel Casing: Protection from rust and corrosion in all types of water with the help of steel casings. Smooth & Noiseless Operation: Smooth and noise-free operation through precise assembly of the electrical components of the motor to minimize vibration. TEFC Enclosure (Totally Enclosed Fan Cooled): The enclosure is designed to protect the internal components from the external environment, thereby increasing the life of the motor and ensuring consistent operation. Easy Installation: The C-Face mount design is compatible with almost all the flat-plate hoist systems/gearboxes, which simplifies mounting and saves time and labor costs. Installation and Usage Pre-Installation: Check the compatibility of your hoist system for the C Face motor. Wiring should be for 115V or 230V, based on your dock’s power supply. Engage or consult a licensed electrician for safety. Installation: Align the flanges with the gearbox and use the appropriate-sized bolts for mounting and securing. Connect with the power source. Usage : Ensure to conduct a dry run to check the rotation direction and smooth operation. Maintenance Regularly inspect for signs of rust, loose bolts, or electrical wear as suggested. Rinse off debris and deposited salt with freshwater to keep the motor clean. Ensure all the wiring remains sealed and dry for electrical safety. Disconnect and store in a weather-protected place when the motor is not being used.

$401.00

1 HP C-Face Boat Motor in Stainless Steel with its all-stainless steel casing and concealed design, is capable of resisting corrosion due to saltwater, moisture intrusion, and damage from extreme weather. The motor design is easy for quick connection to gear plates and compatible drives with C-face mounts. It is also integrated with thermal overload protection and TEFC design to guard against overheating and contamination. All in all, a promise to make your investment in the motor successful and provide you easy lifting experience. Key Features & Benefits Heavy-performance Power Output: Provides powerful lifting capacity for smooth, efficient boat handling through 1 HP. Stainless Steel Casing: Made from stainless steel, it has rust-proof and corrosion-resistant construction ideal for saltwater and freshwater conditions. Smooth & Noiseless Operation: Smooth and noise-free operation through precise assembly of the electrical components of the motor to minimize vibration. TEFC Enclosure (Totally Enclosed Fan Cooled): Protects the internal components from moisture and dust, thereby increasing the life of the motor and ensuring consistent operation. Easy Installation: The C-Face mount design is compatible with almost all the flat-plate hoist systems/gearboxes, which simplifies mounting and saves time and labor costs. Installation and Usage Pre-Installation: Check if your hoist system is compatible with the C Face motor. The wire should be for 115V or 230V, based on your power supply. Engage or consult a licensed electrician for safety. Installation: You need to align the flanges of the motor with the gearbox for mounting and use the bolts of the correct size and parameters for securing. Check the power source and connect the motor to the power source. Usage: Always balance the load on the lift, do not overload the lift system, and check if the surroundings of the motor are clear during the lifting operation. Conduct a test run to check the direction of the rotation and if the motor is operating smoothly. Maintenance Regularly inspect for signs of rust, loose bolts, or electrical wear as suggested. Rinse off debris and deposited salt with freshwater to keep the motor clean. Ensure all the wiring remains sealed and dry for electrical safety. Disconnect and store in a weather-protected place when the motor is not being used.

$1152.00

2 HP C-Face Boat Motor is made to deliver long-lasting performance and seamless boat lifting operation. The reliable torque and strength required to handle demanding lifting applications are the specialty of this motor. It can sustain the hardest environment to enable you to fulfil the operations easily. It is an unregrettable and smart investment in scenarios of upgrading an existing boat lifting system or replacing an old motor, if you are doing so. Key Features & Benefits Heavy-performance Power Output – Easy boatlift for medium to heavy loads through 2 hp power. Marine Grade Stainless Steel Casing: Protection from rust and corrosion in all types of water with the help of steel casings. Smooth & Silent Operation: Smooth and noise-free operation through precise assembly of the electrical components of the motor to minimize vibration. TEFC Enclosure (Totally Enclosed Fan Cooled): Designed to protect the internal components from the external environment, thereby increasing the life of the motor and ensuring consistent operation. Easy to Install: C-Face mount design is compatible with almost all the flat-plate hoist systems/gearboxes, which simplifies mounting and saves time and labor costs. Installation and Usage Pre-Installation: Check the compatibility of your hoist system for the C Face motor. Wiring should be for 115V or 230V, based on your dock’s power supply. Engage or consult a licensed electrician for safety. Installation: Align the flanges with the gearbox and use the appropriate-sized bolts for mounting and securing. Connect with the power source. Usage : Ensure to conduct a dry run to check the rotation direction and smooth operation. Maintenance Regularly inspect for signs of rust, loose bolts, or electrical wear as suggested. Rinse off debris and deposited salt with freshwater to keep the motor clean. Ensure all the wiring remains sealed and dry for electrical safety. Disconnect and store in a weather-protected place when the motor is not being used.

$399.99

LE C-Face 3/4 HP Stainless Steel Electric Motor is the right investment choice if you want a motor that is made to deliver long-lasting performance and seamless boat lifting operation. The reliable torque and strength required to handle demanding lifting applications are the specialty of this motor. It can sustain the hardest environment to enable you to fulfil the operations easily. It is an unregrettable and smart investment in scenarios of upgrading an existing boat lifting system or replacing an old motor, if you are doing so. Key Features & Benefits Robust Power Output: It can deliver powerful and efficient operation, and is also perfect for medium-duty applications in marine environments. Marine Grade Stainless Steel Housing: It is manufactured to b e rust and corrosion resistant in all types of water with the help of steel casings. Smooth & Silent Operation: It is precisely assembled for smooth and noise-free operation to minimize vibration. TEFC Enclosure (Totally Enclosed Fan Cooled): It has the enclosure design to protect the internal electrical components from water and the external environment to increase the life of the motor and ensure consistent operation. Easy to Install: It has a C-Face mount design and is compatible with almost all the flat-plate hoist systems/gearboxes, which simplifies mounting and saves time and labor costs. Installation and Usage Pre-Installation: Check the compatibility of your hoist system for the C Face motor. Wiring should be for 115V or 230V, based on your dock’s power supply. Engage or consult a licensed electrician for safety. Installation: Align the flanges with the gearbox and use the appropriate-sized bolts for mounting and securing. Connect with the power source. Usage : Ensure to conduct a dry run to check the rotation direction and smooth operation. Maintenance Regularly inspect for signs of rust, loose bolts, or electrical wear as suggested. Rinse off debris and deposited salt with freshwater to keep the motor clean. Ensure all the wiring remains sealed and dry for electrical safety. Disconnect and store in a weather-protected place when the motor is not being used.

$411.00

Flat Plate 1.5 HP HD Motor can deliver the best capabilities for you, if you are a marine professional or enthusiastic boater. It has all the capabilities—strength, durability, and convenience. It is safe and can give you the promise to offer dependable performance season after season. Either you can upgrade your boat-lifting system or replace the old aging motor with this powerful boat motor. This could be your safest and smartest investment as a mariner. Key Features & Benefits Heavy-Duty Power Output: The 1.5 hp power can facilitate both medium to heavy-duty boat lifts. Marine Grade Metal Housing: The marine grade metal with powder coating is ideal for saltwater and can stand firm against rust and corrosion, even in saltwater zones. Smooth & Quiet Operation: The precise and balanced assembly of the internal components of the motor has minimal vibration and hence gives smooth and noise-free operation. TENV Sealed Housing: The enclosure is designed to protect the internal components from the external environment, thereby increasing the life of the motor and ensuring consistent operation. Easy Installation: The Flat Plate mount design is compatible with almost all the flat-plate hoist systems/gearboxes, which simplifies mounting and saves time and labor costs. Installation and Usage Pre-Installation: Check the compatibility of your hoist system for the Flat Plate motor. Wiring should be for 115V or 230V, based on your dock’s power supply. Engage or consult a licensed electrician for safety. Installation: Align the flanges with the gearbox and use the appropriate-sized bolts for mounting and securing. Connect with the power source. Usage : Ensure to conduct a dry run to check the rotation direction and smooth operation. Maintenance Regularly inspect for signs of rust, loose bolts, or electrical wear as suggested. Rinse off debris and deposited salt with freshwater to keep the motor clean. Ensure all the wiring remains sealed and dry for electrical safety. Disconnect and store in a weather-protected place when the motor is not being used. Oil the bearing from time to time.

$319.00

Motor, Flat Plate 1 HP Motor can deliver the best capabilities for you, if you are a marine professional or an enthusiastic boater. It has all the capabilities—strength, durability, and convenience. It is safe and can give you the promise to offer dependable performance season after season. Either you can upgrade your boat-lifting system or replace the old aging motor with this powerful boat motor. This could be your safest and smartest investment as a mariner. Key Features & Benefits Heavy-Duty Power Output: The 1.5 hp power can facilitate both medium to heavy-duty boat lifts. Marine Grade Metal Housing: The marine grade metal with powder coating is ideal for saltwater and can stand firm against rust and corrosion, even in saltwater zones. Smooth & Quiet Performance: The precise and balanced assembly of the internal components of the motor has minimal vibration and hence gives smooth and noise-free operation. Enclosed Non-Vented Housing (TENV): The enclosure is designed to protect the internal components from the external environment, thereby increasing the life of the motor and ensuring consistent operation. Easy to Install: The Flat Plate mount design is compatible with commonly found boat lifts across docks and marinas, supports flat-plate hoist systems/gearboxes, which simplifies mounting and saves time and labor costs. Installation and Usage Pre-Installation: Check the compatibility of your hoist system for the Flat Plate motor. Wiring should be for 115V or 230V, based on your dock’s power supply. Engage or consult a licensed electrician for safety. Installation: Align the flanges with the gearbox and use the appropriate-sized bolts for mounting and securing. Connect with the power source. Usage : Ensure to conduct a dry run to check the rotation direction and smooth operation. Maintenance Regularly inspect for signs of rust, loose bolts, or electrical wear as suggested. Rinse off dust, debris, and deposited salt with freshwater to keep the motor clean. Ensure all the wiring remains sealed and dry for electrical safety. Disconnect and store in a weather-protected place when the motor is not being used. Lubricate the bearing from time to time.

$922.00

Flat Plate 1 HP Boat Motor has the best capabilities to support your lifting jobs as a marine professional or enthusiastic boater. It is strong with genuine power requirements, durable with marine-grade material casing, and convenient with a standard mount design. The motor meets all the safety standards and can provide dependable performance consistently season after season. It is an unregrettable and safe investment in any case, whether you are upgrading your boat-lifting system or replacing the old and aging motor with this powerful boat motor. Key Features & Benefits Heavy-Duty Power Output: The 1 hp power enables medium-level boat lifts easily. Stainless Steel Housing: The SS is perfect for saltwater and all types of water and can stand firm against rust and corrosion. Smooth & Quiet Performance: The precise and balanced assembly of the internal components of the motor has minimal vibration and hence gives smooth and noise-free operation. Enclosed Non-Vented Housing (TENV): The enclosure is designed to protect the internal components from the external environment, thereby increasing the life of the motor and ensuring consistent operation. Easy to Install: The Flat Plate mount design is compatible with almost all the boat lifts across docks and marinas, supports flat-plate hoist systems/gearboxes that enable easy mounting, and saves time and labor costs. Installation and Usage Pre-Installation: Check the compatibility of your hoist system for the Flat Plate motor. Wiring should be for 115V or 230V, based on your dock’s power supply. Engage or consult a licensed electrician for safety. Installation: Align the flanges with the gearbox and use the appropriate-sized bolts for mounting and securing. Connect with the power source. Usage : Ensure to conduct a dry run to check the rotation direction and smooth operation. Maintenance Regularly inspect for signs of rust, loose bolts, or electrical wear as suggested. Rinse off dust, debris, and deposited salt with freshwater to keep the motor clean. Ensure all the wiring remains sealed and dry for electrical safety. Disconnect and store in a weather-protected place when the motor is not being used. Lubricate the bearing from time to time.

$310.00

Flat Plate 3/4 HP Motor is an excellent companion for you as a marine professional or enthusiastic boater. It has the capability to do medium-scale lifting jobs. It has remarkable characteristics like durable marine-grade material casing and a convenient standard mount design. The motor also meets all the safety standards to make it a dependable solution with good performance consistently. It is an unregrettable and safe investment in any case, whether you are upgrading your boat-lifting system or replacing the old and aging motor. Key Features & Benefits Heavy-Duty Power Output: The 3/4 hp power enables medium-level boat lifting jobs easily. Marine Grade Metal Housing: The marine grade metal with powder coating has the capability to sustain in all types of waters, making it rust and corrosion proof. Smooth & Quiet Performance: The precise and balanced assembly of the internal components of the motor has minimal vibration and hence gives smooth and noise-free operation. Enclosed Non-Vented Housing (TENV): The enclosure is designed to protect the internal components from the external environment, thereby increasing the life of the motor and ensuring consistent operation. Easy to Install: The Flat Plate mount design is compatible with almost all the boat lifts across docks and marinas, supports flat-plate hoist systems/gearboxes that enable easy mounting, and saves time and labor costs. Installation and Usage Pre-Installation: Check the compatibility of your hoist system for the Flat Plate motor. Wiring should be for 115V or 230V, based on your dock’s power supply. Engage or consult a licensed electrician for safety. Installation: Align the flanges with the gearbox and use the appropriate-sized bolts for mounting and securing. Connect with the power source. Usage : Ensure to conduct a dry run to check the rotation direction and smooth operation. Maintenance Regularly inspect for signs of rust, loose bolts, or electrical wear as suggested. Rinse off dust, debris, and deposited salt with freshwater to keep the motor clean. Ensure all the wiring remains sealed and dry for electrical safety. Disconnect and store in a weather-protected place when the motor is not being used. Lubricate the bearing from time to time.

$478.00

3 4 hp boat lift motor with switch is the one you would be looking for if you’re a fan of a durable, easy-to-install motor embedded with safety and control in marine applications. This is a smart, reliable choice as it is strong with genuine power requirements, durable with marine-grade material casing, and convenient with a standard mount design. The motor meets all the safety standards and can provide dependable performance consistently season after season. It is an unregrettable and safe investment in any case, whether you are upgrading your boat-lifting system or replacing the old and aging motor with this powerful boat motor. Key Features & Benefits Heavy-Duty Power Output: The 3/4 hp power enables medium-level boat lifts easily. Stainless Steel Housing: The SS is perfect for saltwater and all types of water and can stand firm against rust and corrosion. Smooth & Quiet Performance: The precise and balanced assembly of the internal components of the motor has minimal vibration and hence gives smooth and noise-free operation. It is pre-installed with a Bremas Drum Switch for safe and intuitive forward/reverse control. Enclosed Non-Vented Housing (TENV): The enclosure is designed to protect the internal components from the external environment, thereby increasing the life of the motor and ensuring consistent operation. Easy to Install: The Flat Plate mount design is compatible with almost all the boat lifts across docks and marinas, supports flat-plate hoist systems/gearboxes that enable easy mounting, and saves time and labor costs. Installation and Usage Pre-Installation: Check the compatibility of your hoist system for the Flat Plate motor. Wiring should be for 115V or 230V, based on your dock’s power supply. Engage or consult a licensed electrician for safety. Installation: Align the flanges with the gearbox and use the appropriate-sized bolts for mounting and securing. Connect with the power source. Usage : Ensure to conduct a dry run to check the rotation direction and smooth operation. Maintenance Regularly inspect for signs of rust, loose bolts, or electrical wear as suggested. Rinse off dust, debris, and deposited salt with freshwater to keep the motor clean. Ensure all the wiring remains sealed and dry for electrical safety. Disconnect and store in a weather-protected place when the motor is not being used. Lubricate the bearing from time to time.

$44.50

Lifting or hoisting operations are painstaking and really need great strength. This 10″ Pulley Wheel will definitely make such a mechanical operation smooth and efficient. The pulley can be deployed for a variety of usages including boat lifting, anchoring, rigging, hoisting, cranes, elevators, conveyor, HVAC system, lathe, and milling machine. The 10″ Pulley Wheel does its operation seamlessly with reduced friction and superior load-bearing capacity. Key Features Durable: Manufactured from zinc die-cast, making the pulley wheel wear, corrosion, and impact resistant. With long-lasting performance in all types of environments. Smooth Design: Grooved design for safe rope or belt movement. The unique design minimizes the friction and enhances the efficiency and longevity of the ropes. High Load Capacity: Apposite for marine and industrial applications as it has substantial load-bearing capacity. Easy to install: Standard bore size facilitates quick mounting and removal for maintenance. Additional Information Usage and maintenance: Before you install, check for deformation, cracks, or rust. Use the correct bore size for installation. Regularly check for wear and tear and replace if required. Also, the application of grease/lubricant will ensure frictionless operation and longevity. The application of anti-corrosion sprays is also suggested for marine environments.

$94.75

The 11.250″ Pulley Wheel double gear pulley is remarkably efficient at bearing heavy loads for lifting and pulling operations. The resilient and robust body can lift heavy loads with minimal exertion. It helps to significantly reduce your strain and improves overall operational effectiveness. This versatile pulley wheel can be implemented for a wide range of applications. It is essential for industries that depend on lifting, anchoring, rigging, and hoisting and is particularly best-suited for use in boats. Key Features Sturdy and Reliable: The sturdy zinc die-cast is corrosion resistant, making the pulley reliable and long-lasting. Smooth Design: The unique fluted design ensures minimal friction enhancing the efficiency and longevity of the ropes along with smooth and safe belt movement. Heavy Load-bearing Capacity: The size and design with substantial load-bearing capacity makes it fit specifically for marine and industrial applications. Easy to install: The mounting and removal is made easy with the bore of standard size. Additional Information Usage and maintenance: Check for any deformities, such as bends or dents, before you install the pulley wheel. Cracks or rusting on the surface can reduce the safety of operation, hence, you need to check that as well. Select the pulley wheel of the correct bore size for safe and efficient operation. Regular checks for damage or wear are a must, and if needed, replace it. Also, the application of grease/lubricant in the bore will ensure frictionless operation and endurance. The application of anti-corrosion sprays is also suggested for marine environments.

$50.00

The 4 Inch Flat Pulley Wheel efficiently guides the boat lift cable from the drive pipe to the boat cradle. Its heavy load-bearing capacity distributes the load, makes lifting easy, and improves the overall operational effectiveness. It is multipurpose and can be deployed for a wide range of heaving applications. It is indispensable for you if you need effortless lifting, anchoring, rigging, and hoisting for your boats. Key Features Resilient Structure: The marine grade aluminum body of the pulley is corrosion resistant, making it reliable and long-lasting. Smooth Design: The flat design reduces the lifting friction and increases the efficiency and durability of the rope lines. Load-bearing Capacity: The size and design with substantial load-bearing capacity makes it fit specifically for marine and industrial applications. Easy Mounting: The pulley has a standard bore size, which makes it is easy to install and remove for maintenance. Additional Information Usage and maintenance: Do not forget to check the pulley for any denting or bending before you install it. The pulley requires very minimal maintenance, such as regular checks for rusting and deformities, and needs to be replaced if needed. Select the pulley wheel of the correct bore size for safe and efficient operation. The application of grease/lubricant in the bore will ensure frictionless operation and endurance. The application of anti-corrosion sprays is also suggested for marine environments.

$48.00

The 4-inch raised gear pulley is made from high-grade aluminum. It is lightweight, strong, and has a good corrosion resistance capacity. The bronze bushing bore is efficient in precise cable guidance along with smooth cable rotation with the least friction. It is indispensable and trustworthy for durable and effortless lifting and hoisting for your boats. Key Features Durable Structure: The high-quality aluminum used to manufacture this pulley makes it rust-proof and, hence, dependable and long-lasting. Smooth Design: The raised design reduces the drifting and slippage of the rope during operation; at the same time, it makes the movement frictionless. Load-bearing Capability: The size and design perfectly suit its function of load bearing and hence, it is fit for marine and industrial applications. Easy Mounting: The pulley has a standard bronze bushing bore, which helps in easy mounting and maintenance. Additional Information Usage and maintenance: Do not forget to check the pulley for any denting or bending before you install it. The pulley requires very minimal maintenance, such as regular checks for rusting and deformities, and needs to be replaced if needed. Select the pulley wheel of the correct bore size for safe and efficient operation. The application of grease/lubricant in the bore will ensure frictionless operation and endurance. The application of anti-corrosion sprays is also suggested for marine environments.

$35.10

The 5 Inch Raised Face Boat Pulley is made from high-grade aluminum and has a robust and versatile design. Its lightweight feature makes it indispensable for efficient lifting and pulling operations. The corrosion-resistant body of the pulley is ideal for the marine environment. The standard size makes it easy to install, and the smooth finish ensures efficient and precise cable guidance for smooth cable rotation. It is durable and provides effortless lifting and heaving for your boats. Key Features Heavy-Duty Construction: high-quality aluminum used for this boat pulley makes it durable against corrosion and mechanical stress. Smooth Design: The raised design enhances grip and alignment, thereby reducing slippage of rope/belt for frictionless lifting operations. Load-bearing Capability: The size and design perfectly suit its function of load bearing, and hence it is fit for both marine and industrial applications. Easy Mounting: The boat pulley has a standard bore that helps in easy mounting and maintenance for a secure and hassle-free installation, reducing downtime and maintenance efforts. Additional Information Usage and maintenance: Do not forget to check the boat pulley for any denting or bending before you install it. The pulley requires very minimal maintenance, such as regular checks for rusting and deformities, and needs to be replaced if required. Select the pulley wheel of the correct bore size for safe and efficient operation. The application of grease/lubricant in the bore will ensure frictionless operation and endurance. The application of anti-corrosion sprays is also suggested for marine environments.

$1825.00

Create an enthralling underwater display using the Underwater Fish Light CB Triple 50-100-100. These lights are made for both looks and functionality. These lights will light up your dock with a captivating glow, instantly uplifting the visual appeal of your surroundings. Your aspirations to enhance the ambiance for an evening get-together or to enjoy the fascinating sight of the illuminated dock will be fulfilled. The additional advantage of attracting a diverse array of fish is also attached to these durable fish lights. Key Features Simple Design: 3 self-cleaning bulbs mounted with cage ensures lighting throughout the night and in all types of water. The underwater weights are attached to each bulb to keep them submerged and floating all the time. Versatile and Safe Mounting: 50-100 feet cables attached to each bulb ensure safety from shocks or short circuits. Varying cable lengths allow versatile installation options to suit various dock layouts. Additional Information Installation: Mount the lights under the water’s surface at desired locations and secure them. Then, connect the cable of each bulb to the control box. Ensure that the control box has a suitable and fully grounded power source. Switch it on at the desired time during the evening to enjoy the mesmerizing blue light. Care and maintenance: Periodically inspect the lights and cables for any damage.​ Replace the cable, cage, and bulbs as needed. Keep the light and light cages free from any buildup of algae or debris for optimal light.​ Disconnect from the power source and store in a dry, safe place when you are not using the setup.

$45.00

The Underwater Fish Light Bulb Cage is an essential add-on for your underwater fish lights. It protects the light bulbs from accidental damage for extended use. It also shields the bulbs from floating debris, powerful fish strikes, and the force of water. Sturdy yet lightweight construction made from high-quality, corrosion-resistant material ensures the light beam remains unobstructed and continues to attract fish effectively. Key Features Simple Design: Simple cage-type structure for seamless lighting all the time while at the same time obstructing debris, water force, and fish strikes to the light bulbs Easy Mounting: It is Simple and quick to install on the underwater fish light requiring no special tool or skill. Additional Information Installation: Attach the cage to the frame and fasten the clamps. Care and maintenance: Periodically inspect for any damage.​ Keep the cages free from any buildup of algae or debris for optimal light. Rinse the cage with fresh water to prevent corrosion.​ Store it in a dry, safe place when you are not using the setup.

$45.00

A board to mount your aquatic lighting setup is as important and required as the Fish Lights set . Underwater Fish Light Mounting Board (Large) is the one that is capable of mounting your setup, which is a clean, durable, and thoughtfully designed platform. It is coated with white powder to make it water-resistant and durable for marine environments. Key Features Marine-Grade Durability: The board is made from high-density starboard and is hence suitable for marine environments. It is capable of resisting damage from rot, warping, and moisture. Optimized Size: The size of the board is specified for large-sized transformers or multiple components, hence it offers sufficient surface to organize connections. Lightweight and Manageable: The board is durable enough to stay firmly in place yet lightweight, and hence, one person can manage the installation. Ready-to-Install: The board comes with all the required hardware necessary for mounting hardware and hence easy for you to mount your underwater light transformer securely. Additional Information Installation and Usage : Choose the mounting location, a vertical dock pilaster, piling, or framed board above water level would be ideal and easy to access. Position, hold, and mark the screw locations. Drill the holes and secure using the supplied hardware. Once the board is installed, mount the underwater light transformer. Care and Maintenance Guidelines: Periodically wipe off using a damp cloth to clean the salt spray or debris, and use mild soap, only if needed. Check and tighten screws as required. Try to install the board in shade to avoid discoloration due to sun exposure.

$35.00

As a mariner, you must have a board to mount your lighting setup, which is as important and required for you as having the Fish Lights set up. Underwater Fish Light Mounting Board (medium) is the one that is capable of mounting your lighting setup up which is a clean, sturdy, and thoughtfully designed platform. It is coated with white powder to make it water-resistant and durable for marine environments. Key Features Premium Starboard Structure: The board is made from high-density starboard and is hence suitable for marine environments. It is capable of resisting damage from rot, warping, and moisture. Perfectly Sized: The size of the board is specified for medium-sized transformers, hence it offers sufficient surface to organize connections. Ultra-Lightweight: The board is durable enough to stay firmly in place, yet lightweight, and hence, the installation is quite manageable by a single person. Quick and Easy Setup: The board comes with all the required hardware necessary for mounting hardware and hence easy for you to mount your underwater light transformer securely. Additional Information Installation and Usage: Choose the mounting location, a vertical dock pilaster, piling, or framed board above water level would be ideal and easy to access. Position, hold, and mark the screw locations. Drill the holes and secure using the supplied hardware. Once the board is installed, mount the underwater light transformer. Care and Maintenance Guidelines: Periodically wipe off using a damp cloth to clean the salt spray or debris, and use mild soap, only if needed. Check and tighten screws as required. Try to install the board in shade to avoid discoloration due to sun exposure.

$25.00

A board to mount your aquatic lighting setup is as important and required as the Fish Lights set. Underwater Fish Light Mounting Board (small) is the one that is capable of mounting your setup, which is a clean, durable, and thoughtfully designed platform. It is coated with white powder to make it water-resistant and durable for marine environments. Key Features High-density Starboard Structure: The board is made from high-density starboard and is hence suitable for marine environments. It is capable of resisting damage from rot, warping, and moisture. Optimized Size: The size of the board is specified for medium-sized transformers, hence it offers sufficient surface to organize connections. Ultra-Lightweight: The board is durable enough to stay firmly in place yet lightweight, and hence, the installation is quite manageable by a single person. Quick and Easy Setup: The board comes with all the required hardware necessary for mounting hardware and hence easy for you to mount your underwater light transformer securely. Additional Information Installation and Usage: Choose the mounting location, a vertical dock pilaster, piling, or framed board above water level would be ideal and easy to access. Position, hold, and mark the screw locations. Drill the holes and secure using the supplied hardware. Once the board is installed, mount the underwater light transformer. Care and Maintenance Guidelines: Periodically wipe off using a damp cloth to clean the salt spray or debris, and use mild soap, only if needed. Check and tighten screws as required. Try to install the board in shade to avoid discoloration due to sun exposure.

$1825.00

Create an enthralling underwater display using the Underwater Fish Light VG Triple 50-100-100. These lights are made for both looks and functionality. These emerald green lights will light up your dock with a captivating glow, instantly uplifting the visual appeal of your surroundings. Your aspirations to enhance the ambiance for an evening get-together or to enjoy the fascinating sight of the illuminated dock will be fulfilled. The additional advantage of attracting a diverse array of fish is also attached to these durable fish lights. Key Features Simple Design: 3 self-cleaning bulbs mounted ensure lighting throughout the night and in all types of water. The underwater weights are attached to each bulb to keep them submerged and floating all the time. Versatile and Safe Mounting: 50-100-100 feet cables attached to each bulb ensure safety from shocks or short circuits. Varying cable lengths allow versatile installation options to suit various dock layouts. Additional Information Installation: Mount the lights under the water’s surface at desired locations and secure them. Then, connect the cable of each bulb to the control box. Ensure that the control box has a suitable and fully grounded power source. Switch it on at the desired time during the evening to enjoy the mesmerizing, emerald, vibrant green light. Care and maintenance: Periodically inspect the lights and cables for any damage.​ Replace the cable, cage, and bulbs as needed. Keep the light and light cages free from any buildup of algae or debris for optimal light.​ Disconnect from the power source and store it in a dry, safe place when you are not using the setup.

$609.00

Underwater blue single Fish Light is a great solution to light up your dock any time and/or special events you organize. Radiating pure blue light attracts baitfish and enhances the underwater visibility at nighttime. This portable blue fish light will help you bring beauty and a captivating glow to your dock, instantly uplifting the visual appeal of your surroundings. Your aspirations to enhance the ambiance for an evening get-together or to enjoy the fascinating sight of the illuminated dock will be fulfilled again. Key Features Simple Design: Simple, compact, and portable design makes it easy for you to move it and flexibly fix it around the dock as needed in all types of water. Versatile and Safe: plug‑and‑play light with 50-foot cable attached to the Fish Light is safe from shocks or short circuits. Additional Information Installation: Mount the lights at the required place with the help of the given clips. Then, connect the cable of the bulb to the 110V power source. Switch it on at the desired time during the evening to enjoy the mesmerizing blue light. Care and maintenance: Periodically inspect the light and cable for any damage.​ Keep the light free from any buildup of algae or debris for optimal light.​ Disconnect from the power source and store it in a dry, safe place when you are not using the setup.

$1375.00

The Pedestal, Power SPC-36-2T-350-LED , is a top-of-the-line dockside power station designed to provide dependable electrical service and brilliant lighting in one stylish, all-weather pedestal. Designed for marinas, residential docks, and commercial waterfronts, this pedestal provides the safest and most organized way to power vessels while utilizing energy-efficient and bright LED lighting for illumination and security. Key Features 30A/125V twist-lock receptacles: Equipped with two NEMA L5-30R twist-lock outlet to allow for a safe and secure connection for your boats when they are docked. Meets most shore power cords currently being used in residential and light commercial marina applications. Built-in LED light with photocell: Energy-efficient LED lighting built in to automatically turn on at dusk and off at dawn, keeping the dock illuminated through the night for safety and visibility without the need to remember to turn it on or off. Durable SPC housing: The pedestal body is made of Super-Polymer Composite (SPC), designed to withstand various potential damage, including UV rays, corrosion, impact, and extreme marine weather conditions. Will not crack, yellow or degrade in salt water. Compact and efficient footprint: This pedestal is 36 inches tall and takes up an appropriate footprint for most docks, so it is not in the way or looks too big. A pedestal that is too wide is not portable and creates installation issues when the user has a situation where the utility may not be able to simply replace it with the exact pedestal. Weatherproof and safe: All components are marine-rated and enclosed to keep moisture out, corrosion-proof fastening and watertight connections, and built to meet or exceed marine safety industry standards. Additional Information Installation and Use: Securely mount the pedestal to the dock surfaces with marine-grade bolts. Connect to dock power in accordance with local electrical codes or marina installations. The pedestal is designed specifically for use with watercraft, accessories or dock systems, while also providing excellent lighting to the pedestals or marine area at night. Maintenance and handling: Occasionally, rinse the pedestal with clean water to remove any dirt and salt buildup. Routinely inspect receptacles and LED housing for signs of wear and tear. Check the state of the photocell and only replace bulbs or components with compatible marine-rated materials.

$1625.00

The Pedestal, Power SPC-36-2T-350-LED-Black is a sleek black case that provides safe and effective shore power with an automatic LED dock light. It has a low profile and is small enough to fit on private docks and marinas. It can even handle the toughest weather at sea. This pedestal is 36 inches tall and has a 30A twist-lock plug, electronics that can withstand the weather, and an LED light that comes on when it gets dark. The black powder-coated finish gives the pedestrian dock a modern look and makes it stronger and longer-lasting. Key Features 30A twist-lock outlet: This pedestal contains one NEMA L5-30R outlet, with a gfci 110V outlet. LED lights that switch on and off by themselves with a photocell: The built-in LED light saves energy and goes on by itself at dusk and off by itself at dawn. This makes your dock safer and easier to notice. It makes the marina or dock safer and means you don’t have to remember to turn the lights on and off. Black SPC housing that works well in the water: The pedestal is composed of a Super-Polymer Composite (SPC) that can handle UV rays, salt, corrosion, and impact. This model stands out from other white models because of its unique black finish, which gives it a sleek, stylish appeal. Design of 36 inches: This pedestal is only 36 inches tall, so it’s a wonderful choice for docks with limited space. It may still look nice and neat while being practical. Safe and protected from the weather: The electrical parts are all rated for use on boats and are kept safe in sealed, water-tight containers so they will last a long time and perform well in wet or humid conditions. Additional Information Setup and Usage: Securely install the dock using corrosion-resistant bolts (not included). Connect to shore power per marina and/or residential wiring codes. Will work with most common 30A shore power cords and accessories. Excellent for residential boat docks, private slips, and light-duty commercial marina installations. Care and maintenance: As the module ages, use clear water and mild soap to wash away salt and dirt. Inspect the outlets, light coverings, and housings for any signs of wear or corrosion. Check the photocell is working and replace elements as necessary with marine-rated parts.

$1675.00

The Pedestal, Power SPC-36-2T-420-LED , is a powerful shore power and lighting pedestal – featuring rugged construction, designed to last in a marina, boatyard, or private dock’s environment. Our 36-inch pedestal features dual-pedestal power capability and automated LED lighting. When activated, the pedestal is better illuminated for visibility at night, as well as providing dockside power safely and conveniently. The Super-Polymer Composite (SPC) is weather-resistant and was built for an extreme marine environment and long exposure to sun, salt, and most importantly, moisture. Key Features Dual Power Technologies (30A and 20A): One 30A / 125V twist-lock outlet (NEMA L5-30R) and one standard 20A / 125V GFCI outlet combined for a versatile power delivery for boats, tools, and dockside appliances. Photocell-controlled LED light: The integrated energy-efficient LED light will turn on at dusk and off at dawn. The LED light provides the dock with an added degree of safety and visibility, eliminating the need to turn the fixture on and off. Marine-grade SPC construction: The pedestal housing is (SPC) Super-Polymer Composite, which is tougher & stronger against UV rays, salt spray, impact, and corrosion. This construction provides the pedestal with a durable form and finish to withstand various weather conditions. Compact 36” height: Small enough to fit on residential docks – fully functional for light commercial use. Its clean, compact design minimizes obstruction on your dock. Waterproof and code compliant: Ingeniously conceived with sealed enclosures and corrosion-resistant materials to meet or exceed marine electrical safety requirements. Designed to reliably function in wet/ humid environments. Additional Information Installation and Use: Install the pedestal securely to a dock surface with stainless steel fasteners (not included) and connect it to a proper shore power source that follows local electrical codes. Perfect for use in personal boat slips, yacht clubs, and marina installations that require multiple power options and lighting features in a single pedestal. Care and Maintenance: Take time to periodically wash the cooler with fresh water and a mild detergent. Please inspect all power outlets, GFCI functionality, lighting components, and fasteners on a regular basis to ensure proper operation and safety. In addition to addressing any of the conditions above, be sure to inspect the photocell function as needed.

Contact for price

On the way back or while sailing, you might need to do some lifting. For such taxing jobs in the water, you need strong lifting equipment that can lift your belongings against the sun, salt, and exhaustion. 1” x 54′ nylon sling is the one that gives you confidence to lift, rig, and secure the weight. You can use this sturdy nylon sling to handle fragile marine items, tie down equipment, and move objects on deck. The sling is compact with strength, flexibility, and durability. Key Features Finest Quality Nylon: Made with high-grade nylon, this sling has good stretchability, strength, and flexibility, ideal for repeated usage in harsh saltwater environments. High Load Capacity: The ability to lift heavy loads easily and safely is quite a commendable feature of this sling. Water Resistant: Strength and reliability are combined with this sling; the nylon is excellent at preventing corrosion from water and preventing the growth of mold and fungus. Soft on Surface: Nylon threads of the sling are soft on the contact surface, hence less chances of scratching the surface. Ease of Handling: Easy to fold and roll for space-saving storage and traveling. Additional Information Application: Choose the correct combination of hitch and weight for the object to be lifted or moved based on the application and WLL. Do not forget to regularly monitor and check the sling threads thoroughly for signs of damage and wear. Note: The Working load limits or WLL are defined based on ideal load conditions. Maintenance and Care: Ensure to distribute the load evenly and do not exceed the load beyond the rated load-bearing capacity. Sharp objects and direct sunlight can damage the nylon threads; hence, keep them away from such conditions. Store it in a safe and weatherproof environment to ensure the longevity of the sling.

$19.99

When you are sailing or sailing back, you might need to do some lifting jobs. Such tough jobs in the water need a strong lifting gear that can lift your stuff against salt, sun, and strain. 1″ x 8′ Nylon Sling is suitable to do this job, and you can have full confidence in lifting, rigging, and securing the load. Jobs like hoisting equipment on deck, tying down some gear, or handling sensitive marine materials, you can have this heavy-duty nylon sling deployed that offers the durability, flexibility, and strength all three combined in the compact and resilient sling. Key Features Premium Nylon: Industry-grade nylon is used to make this sling, which provides a good tensile strength and long-lasting flexibility in harsh environments for recurrent usage. Load Capacity: Capable of handling heavy lifting with ease and can safely carry large loads. Water Resistant and Durable: Made from strong nylon, it r esists mold, mildew, UV degradation, and saltwater corrosion, thereby maintaining its strength and reliability. Soft on Load: S oft, non-abrasive nylon does not damage or scratch polished surfaces during lifting. Easy to Handle: It is easy to coil, store, and maneuver this sling. Additional Information Usage: Inspect the sling thoroughly for cuts and damage. Always choose the proper hitch configuration based on the application and working load limits (WLL). Note: Working load limits (WLL) are based on ideal conditions. Always inspect before use and follow proper rigging practices. Care and maintenance: For a safe and extended life span of the sling, always ensure to evenly distribute the load and never exceed the rated capacity. At the time of using it and storage protect it from sharp edges and direct sunlight.

$55.99

Lifting and hoisting jobs are mandatory for your marine journeys. Such demanding jobs require you to have reliable lifting/rigging gear that can not only withstand saltwater and sunlight but also heavy loads. 2″ x 10′ Nylon Sling is trustworthy for all types of lifting, rigging, and securing loads requirements. This sling has all three in one—durable, flexible, and strong, and is also compact and resilient. Key Features of Nylon Hoisting Straps Finest Quality Nylon: Made with high-grade nylon, this sling has good stretchability, strength, and flexibility, ideal for repeated usage in harsh saltwater environments. High Load Capacity: Accomplished to lift heavy loads easily and safely is quite a commendable feature of this sling. Water Resistant and Sturdy: Strong nylon with a capacity to resist mold, mildew, UV degradation, and water corrosion helps to maintain the strength and dependability of this sling. Gentle on Load: Smooth nylon of this sling is gentle on polished surfaces, minimizing the risk of damage to the surface. Easy to Handle: It is easy to roll, store, and move this sling. Additional Information Usage: Inspect the sling thoroughly for cuts and damage. Always choose the proper hitch configuration based on the application and working load limits (WLL). Note: Working load limits (WLL) are based on ideal conditions. Always inspect before use and follow proper rigging practices. Care and maintenance: For safe and extended life span of the sling. Always ensure to distribute the load evenly and never exceed the rated capacity of load. At the time of using, it and storage protect it from sharp edges and direct sunlight.

$40.99

Loading cargo, hoisting gear, or moving machinery on deck- you can do all these operations safely and reliably using the 2″ x 3′ Nylon Sling. Strength and reliability are a must for such tasks when you are doing marine operations. This sling doesn’t need you to remain cautious for rough use and harsh marine environments. This sturdy 2-ply nylon sling delivers superior performance for lifting, rigging, and securing your equipment in any environment, including a harsh marine environment. Key Features Premium Quality Nylon: The premium quality nylon used for this sling makes it flexible and sturdy. Heavy Load Capacity: The sling has the capability to lift and bear heavy loads easily and safely, making it quite reliable. Water Resistant and Sturdy: The sling is made from nylon that can resist the growth of mold and fungus. It is also great in fighting corrosion due to UV rays and water corrosion to maintain its strength and dependability. Soft and Smooth on the Surface: The smooth nylon threads used for the sling are gentle on surface coatings, minimizing damage to the surface. Easy to Handle: The sling is very flexible, very easy to fold and roll, store for movement, and store. Additional Information Usage: Regularly monitor and check the sling thoroughly for any damage. Ensure you choose the proper hitch configuration based on the application and working load limits (WLL). Note: Working load limits (WLL) are based on ideal conditions. Always inspect before use and follow proper rigging practices. Care and maintenance: To ensure the safety and longevity of the sling. Always ensure that the load is distributed evenly. Never exceed the rated load-bearing capacity. Keep it away from sharp edges/objects and direct sunlight while using and storing it.

$42.99

When challenging marine conditions call for reliable lifting strength, the Nylon Sling 2″ x 4′ rises to the challenge. The resilient and flexible sling made from 2-ply nylon thread is capable of delivering exceptional performance for boat lifting, rigging, hoisting, and a wide range of marine lifting operations. This boat lift sling gives you a perfect balance of strength and safety to make your marine journey enjoyable and stress-free. Key Features of Boat Lift Slings Premium Quality Nylon: The premium quality nylon threads used for weaving this sling make it elastic and strong. Load Capacity: The sling can lift heavy loads effortlessly and securely, making it quite reliable. Water Resistant and Tough: The boat lift sling straps is made from nylon that can resist the growth of mold and fungus. It is also great in fighting corrosion due to UV rays and water corrosion to maintain its strength and dependability. Gentle on Surface: Nylon threads make this boat lifting slings soft on the load, minimizing damage to the surface through scratching. Ease of Handling: Easy to fold and roll for space-saving storage and traveling. Additional Information Usage: The usage is quite easy, as hooking the eyes to the load. But regularly monitor and check the sling thoroughly for any damage. Ensure you choose the proper hitch configuration based on the application and working load limits (WLL). Note: Working load limits (WLL) are based on ideal conditions. Always inspect before use and follow proper rigging practices. Care and maintenance: To ensure the safety and longevity of the sling, always ensure to evenly distribute the load. Ensure that you do not to exceed the rated load-bearing limit. Keep it away from sharp edges/objects and direct sunlight while using and storing it.

$46.99

The challenging marine conditions always compel you to have a reliable lifting tool. 2″ x 6′ Nylon Sling will help you to overcome this challenge. Made from 2-ply nylon thread, this sling is resilient and flexible and is capable of delivering excellent performance for boat lifting, rigging, hoisting, and many other lifting operations. The strength and safety features of this sling are admirable and keep you stress-free while lifting and rigging. Key Features Premium Quality Nylon: The quality nylon threads used for making the sling give it elasticity and strength. Heavy Load Capacity: The sling can effortlessly and reliably bear and lift heavy loads. Water Resistant and Tough: The sling is water resistant and strong and avoids the growth of mold and fungus. It is equally resistant to UV rays and sea salt. Gentle on Surface: The nylon threads make the sling soft thereby minimizing the damage to the surface due to scratching. Ease of Handling: The sling is easy to fold and roll and can be stored even in less space. Additional Information Usage: The usage is quite easy, as hooking the eyes to the load. Inspect the sling thoroughly for cuts and damage. Always choose the proper hitch configuration based on the application and working load limits (WLL). Note: Working load limits (WLL) are based on ideal conditions. Always inspect before use and follow proper rigging practices. Care and maintenance: To ensure the safety and longevity of the sling, always distribute the load evenly. Do not exceed the rated load-bearing limit at the time of lifting heavy loads. Store it away from sharp edges, objects, and direct sunlight.

$155.00

Lifting a boat and putting it in and out of water could be a demanding job if it is to be done without a strong lifting cable or rope. 3/8 in. x 30 ft Stainless Steel Cable is the answer as a strong solution for this job. Its stainless steel strands are not only flexible but also corrosion resistant and built for long-term reliability with minimal maintenance. 7×19 strand formation of this cable is perfect and resilient for heavy lifting. Key Features & Benefits Strong and Durable: Stainless Steel of 316 Type enables you to use the cable in harsh saltwater and other marine conditions. It is resistant to corrosion due to salt and weather. Heavy-Duty but Flexible : Robust 3/8-inch diameter made from 7×19 strand configuration means 133 individual SS wires are interlaced together to get good load-bearing capacity as well as excellent flexibility. Versatile Utility : A 30-foot length with a sleek, polished finish enables you to use the cable for a wide range of applications, specifically for sailboat rigging in mid-sea. Easy to install: Rope thimbles and clamps make your installation process easy and hassle-free. Installation and Usage Use a wire cutter of appropriate gauge and grind the ends after cutting the cable to avoid fraying. Wear hand gloves while uncoiling or handling steel cable to protect your hands from friction burns. Use appropriate hardware to clamp or tuck the cable. Maintain a minimum bend radius to avoid internal wire breakage and fatigue of the cable. Maintenance Regularly check the cable for kinks, frays, or corrosion. Rinse with fresh water and mild soap, and then wipe dry with a soft cloth. If you are using it for frequent movement or friction, ensure to apply a light coat of marine-grade lubricant to reduce wear and tear. When not in use, store the cable in a dry and enclosed space.

$215.00

3/8 in. x 45 ft Stainless Steel Cable makes the lifting and rigging operations in mid-sea easy for you. It has a very flexible structure made in a 7 x 19 formation and, in parallel, provides trust and reliability while lifting heavy loads. The stainless steel strands are corrosion resistant and built for long-term reliability, and give you minimal maintenance efforts. Key Features & Benefits Powerful and Enduring: In the harsh saltwater and other worst marine conditions, the stainless steel of 316 Type used in the cable will help you do your lifting job efficiently, which has the capacity to withstand corrosion due to salt and weather. Sturdy but Flexible : To provide an excellent load-bearing capacity and flexibility, it has a diameter of 3/8-inch that is made from a 7×19 strand configuration, meaning 133 individual SS wires are interwoven together. Adaptable Utility : A 45-foot length with a sleek, polished finish enables you to use the cable for a wide range of applications, specifically for sailboat rigging in mid-sea. Easy to install: Rope thimbles and clamps make your installation process easy and hassle-free. Installation and Usage Use a wire cutter of appropriate gauge and grind the ends after cutting the cable to avoid fraying. Wear hand gloves while uncoiling or handling steel cable to protect your hands from friction burns. Use appropriate hardware to clamp or tuck the cable. Maintain a minimum bend radius to avoid internal wire breakage and fatigue of the cable. Maintenance Regularly check the cable for kinks, frays, or corrosion. Rinse with fresh water and mild soap, and then wipe dry with a soft cloth. If you are using it for frequent movement or friction, ensure to apply a light coat of marine-grade lubricant to reduce wear and tear. When not in use, store the cable in a dry and enclosed space.

$245.00

When it comes to picking up your boat or other heavy equipment at the time of sailing or mid-sea, you need a reliable lifting and rigging partner. And it can be none other than an SS cable of high strength. 3/8 in. x 50 ft Stainless Steel Cable, you can easily rely on it. It has a 7×19 strand formation, making it an excellent combination of strength and reliability with the least maintenance. Key Features & Benefits Resilient: The cable is made from 316 Type Stainless Steel, which makes it corrosion resistant as well, and it can survive harsh marine water. Tough and Malleable : The cable has 133 individual SS strands that are interwoven into a 7×19 strand configuration, giving it a diameter of 3/8 in. to it. This makes the cable tough and increases its load-bearing capacity and flexibility. Multipurpose : The cable is of 50-foot length with a metallic lustre, making it aesthetically appealing and amenable for a wide range of applications, specifically for boat and marine equipment rigging. Easy Installation: The cable can be easily installed using the rope thimbles and clamps. Installation and Usage Use a wire cutter of appropriate gauge and grind the ends after cutting the cable to avoid fraying. Wear hand gloves while uncoiling or handling steel cable to protect your hands from friction burns. Use appropriate hardware to clamp or tuck the cable. Maintain a minimum bend radius to avoid internal wire breakage and fatigue of the cable. Maintenance Regularly check the cable for kinks, frays, or corrosion. Rinse with fresh water and mild soap, and then wipe dry with a soft cloth. If you are using it for frequent movement or friction, ensure to apply a light coat of marine-grade lubricant to reduce wear and tear. When not in use, store the cable in a dry and enclosed space.

$364.00

3/8 in. x 60 ft Stainless Steel Cable makes the lifting and rigging operations in mid-sea easy for you. It has a very flexible structure made in a 7×19 formation and, in parallel, provides trust and reliability while lifting heavy loads. The stainless steel strands are corrosion-resistant and built for long-term reliability, and give you minimal maintenance efforts. Key Features & Benefits Strong and Durable: Stainless Steel of 316 Type enables you to use the cable in harsh saltwater and other marine conditions. It is resistant to corrosion due to salt and weather. Sturdy but Flexible : To provide an excellent load-bearing capacity and flexibility, it has a diameter of 3/8-inch that is made from a 7×19 strand configuration, meaning 133 individual SS wires are interwoven together. Versatile Utility : A 60-foot length with a sleek, polished finish enables you to use the cable for a wide range of applications, specifically for sailboat rigging in mid-sea. Easy Installation: The cable can be easily installed using the rope thimbles and clamps. Installation and Usage Use a wire cutter of appropriate gauge and grind the ends after cutting the cable to avoid fraying. Wear hand gloves while uncoiling or handling steel cable to protect your hands from friction burns. Use appropriate hardware to clamp or tuck the cable. Maintain a minimum bend radius to avoid internal wire breakage and fatigue of the cable. Maintenance Regularly check the cable for kinks, frays, or corrosion. Rinse with fresh water and mild soap, and then wipe dry with a soft cloth. If you are using it for frequent movement or friction, ensure to apply a light coat of marine-grade lubricant to reduce wear and tear. When not in use, store the cable in a dry and enclosed space.

$315.00

3/8 in. x 72 ft. Stainless Steel Cable is designed to manage the toughest tasks for you with confidence. High-grade galvanized steel provides an excellent grip and support while lifting and rigging heavy items. It is not only flexible but also corrosion resistant and built for long-term reliability with minimal maintenance. 7×19 strand formation of this cable is ideal and resilient for heavy lifting. Key Features & Benefits Sturdy: Stainless Steel of 316 Type is resistant to corrosion and enables you to use the cable in saltwater and other harsh conditions. Durable but Flexible : Robust 3/8-inch diameter made from 7×19 strand configuration means 133 individual SS wires are interlaced together to get good load-bearing capacity as well as excellent flexibility. Multiutility : A 72-foot length with a sleek, polished finish enables you to use the cable for a wide range of applications, specifically for sailboat rigging in mid-sea. Easy to install: Rope thimbles and clamps make your installation process easy and hassle-free. Installation and Usage Use a wire cutter of appropriate gauge and grind the ends after cutting the cable to avoid fraying. Wear hand gloves while uncoiling or handling steel cable to protect your hands from friction burns. Use appropriate hardware to clamp or tuck the cable. Maintain a minimum bend radius to avoid internal wire breakage and fatigue of the cable. Maintenance Regularly check the cable for kinks, frays, or corrosion. Rinse with fresh water and mild soap, and then wipe dry with a soft cloth. If you are using it for frequent movement or friction, ensure to apply a light coat of marine-grade lubricant to reduce wear and tear. When not in use, store the cable in a dry and enclosed space.

$115.00

As a mariner, you need a reliable partner when you have to do a lifting job, such as lifting rigging, a boat, and other heavy equipment or loads. 5/16 in. x 30 ft. Stainless Steel Boat Lift Cable is designed to accompany you in such conditions. High-grade galvanized steel provides an excellent grip and supports heavy items. It is flexible and corrosion resistant at the same time, built for reliability with the least maintenance. 7×19 strand formation of this cable is ideal and resilient for heavy lifting. Key Features & Benefits Sturdy: Stainless Steel of 316 Type is resistant to corrosion due to salt water and other minerals, and also enables you to use the cable in harsh conditions. Flexible Construction : The 5/16- inch diameter is made from a 7×19 strand configuration means 133 individual SS wires are interwoven together to get not just sufficient but reliable load-bearing capacity along with excellent flexibility. Multipurpose : A 30-foot length with a glossy polish finish can be used for various purposes and applications, specifically designed for sailboat rigging in mid-sea. Easy to install: Rope thimbles and clamps of appropriate sizes make your installation process easy and hassle-free. Installation and Usage Use appropriate hardware to clamp or tuck the cable. Maintaining a minimum bend radius to avoid internal wire breakage and fatigue of the cable. The cable ends should be saved from fraying, and hence, use a wire cutter of appropriate gauge and grind the ends after cutting the cable. You may scratch your hands or get friction burns. To avoid this, always wear hand gloves of PPE quality to protect your hands. Maintenance For frequent movement or frictional usage, apply marine-grade lubricant lightly on the surface to reduce wear and tear. Regularly check the cable for kinks, frays, or corrosion. Rinse with fresh water and mild soap, and then wipe dry with a soft cloth. When not in use, store the cable in a dry and enclosed space.

$135.00

5/16 in. x 35 ft Stainless Steel Cable makes the lifting and rigging operations in mid-sea easy for you. It has a very flexible structure made in a 7×19 formation and, in parallel, provides trust and reliability while lifting heavy loads. The stainless steel strands are corrosion-resistant and built for long-term reliability, and give you minimal maintenance efforts. Key Features & Benefits Strong and Durable: Stainless Steel of 316 Type enables you to use the cable in harsh saltwater and other marine conditions. It is resistant to corrosion due to salt and weather. Malleable Construction : The 5/16- inch diameter is made from a 7×19 strand configuration, which means 133 individual Stainless Steel wires are merged and woven together to get not just sufficient but reliable load-bearing capacity along with excellent flexibility. Multipurpose : Smooth polish finish and a comfortable pre-cut length of 35-feet, makes the cable multipurpose —specifically designed for sailboat rigging in mid-sea. Easy to install: The Installation process of the cable is easy and hassle-free through the rope thimbles and clamps of appropriate sizes. Installation and Usage Use appropriate hardware to clamp or tuck the cable. Maintaining a minimum bend radius to avoid internal wire breakage and fatigue of the cable. The cable ends should be saved from fraying, and hence, use a wire cutter of appropriate gauge and grind the ends after cutting the cable. You may scratch your hands or get friction burns. To avoid this, always wear hand gloves of PPE quality to protect your hands. Maintenance Regularly check the cable for kinks, frays, or corrosion. Rinse with fresh water and mild soap, and then wipe dry with a soft cloth. If you are using it for frequent movement or friction, ensure to apply a light coat of marine-grade lubricant to reduce wear and tear. When not in use, store the cable in a dry and enclosed space.

$145.00

As a mariner, if you are a fan of long-lasting strength, weather resistance, and high-performance 5/16 in. x 40 ft. Stainless Steel Boat Lift Cable is designed only for you. It is reliable for lifting jobs such as lifting rigging or boats, and other heavy equipment. The high-quality galvanized steel has the capability to provide an excellent hold and support a heavy load. It is flexible and corrosion resistant at the same time, built for reliability with the least maintenance. 7×19 strand formation of this cable is ideal and tough for perfect lifting. Key Features & Benefits Robust: Stainless Steel of 316 Type is resistant to corrosion due to salt water and other minerals, and also enables you to use the cable in harsh conditions. Malleable Construction: The 5/16- inch diameter is made from a 7×19 strand configuration means 133 individual Stainless Steel wires are merged and woven together to get not just sufficient but reliable load-bearing capacity along with excellent flexibility. Multipurpose : A length of 40-feet, makes the cable multipurpose along with the smooth polish finish —specifically designed for sailboat rigging in mid-sea. Easy to install: The Installation process of the cable is easy and hassle-free through the rope thimbles and clamps of appropriate sizes. Installation and Usage Use appropriate hardware to clamp or tuck the cable. Maintaining a minimum bend radius to avoid internal wire breakage and fatigue of the cable. The cable ends should be saved from fraying, and hence, use a wire cutter of appropriate gauge and grind the ends after cutting the cable. You may scratch your hands or get friction burns. To avoid this, always wear hand gloves of PPE quality to protect your hands. Maintenance For frequent movement or frictional usage, apply marine-grade lubricant lightly on the surface to reduce wear and tear. Regularly check the cable for kinks, frays, or corrosion. Rinse with fresh water and mild soap, and then wipe dry with a soft cloth. When not in use, store the cable in a dry and enclosed space.

$179.00

For you as a mariner, strength, flexibility, and corrosion resistance are all bundled in one in the form of 5/16 in. x 45 ft Stainless Steel Boat Lift Cable. Your lifting and rigging jobs are made easy and smooth with the very flexible structure of this cable that is made in a 7×19 formation and parallel provides trust and reliability while lifting heavy loads. The stainless steel strands are corrosion-resistant and built for long-term reliability, and give you minimal maintenance efforts. Key Features & Benefits Strong and Durable: Stainless Steel of 316 Type enables you to use the cable in harsh saltwater and other marine conditions. It is resistant to corrosion due to salt and weather. Sturdy but Flexible : The 5/16- inch diameter is made from a 7×19 strand configuration means 133 individual Stainless Steel wires are merged and woven together to get not just sufficient but reliable load-bearing capacity along with excellent flexibility. Varied Usage : Smooth polish finish and a comfortable pre-cut length of 45-feet, makes the cable multipurpose, specifically designed for sailboat rigging in mid-sea. Easy installation: The installation process of the cable is easy and hassle-free through the rope thimbles and clamps of appropriate sizes. Installation and Usage Use appropriate hardware to clamp or tuck the cable. Maintaining a minimum bend radius to avoid internal wire breakage and fatigue of the cable. The cable ends should be saved from fraying, and hence, use a wire cutter of appropriate gauge and grind the ends after cutting the cable. You may scratch your hands or get friction burns. To avoid this, always wear hand gloves of PPE quality to protect your hands. Maintenance Regularly check the cable for kinks, frays, or corrosion. Rinse with fresh water and mild soap, and then wipe dry with a soft cloth. If you are using it for frequent movement or friction, ensure to apply a light coat of marine-grade lubricant to reduce wear and tear. When not in use, store the cable in a dry and enclosed space.

$180.00

Cable, 5/16 in. x 50 ft SS Stainless Steel Cable is designed to manage the toughest tasks for you with confidence. High-grade galvanized steel provides an excellent grip and support while lifting and rigging heavy items. It is not only flexible but also corrosion resistant and built for long-term reliability with minimal maintenance. 7×19 strand formation of this cable is ideal and resilient for heavy lifting. Key Features & Benefits Robust and Sturdy: Stainless Steel of 316 Type is resistant to corrosion and enables you to use the cable in saltwater and other harsh conditions. Flexible and Enduring : Robust 3/8-inch diameter made from 7×19 strand configuration means 133 individual SS wires are interlaced together to get enduring load-bearing capacity as well as excellent flexibility. Varied Usage : A 50-foot length with a sleek, polished finish enables you to use the cable for a wide range of applications, specifically for sailboat rigging in mid-sea. Ease of Installation: Rope thimbles and clamps make your installation process easy and hassle-free. Installation and Usage Use a wire cutter of appropriate gauge and grind the ends after cutting the cable to avoid fraying. Wear hand gloves while uncoiling or handling steel cable to protect your hands from friction burns. Use appropriate hardware to clamp or tuck the cable. Maintain a minimum bend radius to avoid internal wire breakage and fatigue of the cable. Maintenance Regularly check the cable for kinks, frays, or corrosion. Rinse with fresh water and mild soap, and then wipe dry with a soft cloth. If you are using it for frequent movement or friction, ensure to apply a light coat of marine-grade lubricant to reduce wear and tear. When not in use, store the cable in a dry and enclosed space.

$255.00

When it comes to picking up your boat or other heavy equipment at the time of sailing or mid-sea, you need a reliable lifting and rigging partner. And it can be none other than an SS cable of high strength. 5/16 in. x 60 ft Stainless Steel Cable, you can easily rely on. It has a 7×19 strand formation, making it an excellent combination of strength and reliability with the least maintenance. Key Features & Benefits Resilient: The cable is made from 316 Type Stainless Steel, which makes it corrosion resistant as well, and it can survive harsh marine water. Tough and Malleable : The cable has 133 individual SS strands that are interwoven into a 7×19 strand configuration, giving a diameter of 5/16 in. This makes the cable tough and increases its load-bearing capacity and flexibility. Multipurpose : The cable is of 60-foot length with a metallic lustre, making it aesthetically appealing and amenable for a wide range of applications, specifically for boat and marine equipment rigging. Easy Installation: The cable can be easily installed using the rope thimbles and clamps. Installation and Usage Use a wire cutter of appropriate gauge and grind the ends after cutting the cable to avoid fraying. Wear hand gloves while uncoiling or handling steel cable to protect your hands from friction burns. Use appropriate hardware to clamp or tuck the cable. Maintain a minimum bend radius to avoid internal wire breakage and fatigue of the cable. Maintenance Regularly check the cable for kinks, frays, or corrosion. Rinse with fresh water and mild soap, and then wipe dry with a soft cloth. If you are using it for frequent movement or friction, ensure to apply a light coat of marine-grade lubricant to reduce wear and tear. When not in use, store the cable in a dry and enclosed space.

$285.00

The dock ladde r is quite instrumental when it comes to climbing up on the dock or going to the water for swimming in the middle of the sea. This dock is an essential addition for you as a mariner or boater. The 3-step wide lift ladder is robust, easy to use, and made from high-quality weather-resistant aluminum. It also brings the safety and convenience you need to enter or exit the water. The ladder is designed in such a way that you can roll it up to keep it out of the water when not in use. This makes it more appealing for you as a user to avoid corrosion due to constant water contact. Features Broad Steps: The steps are wide enough and are anti-slip to ensure extra support and stability. Lift-up and Lock: The dock ladder is designed to wrap up and lock it when not in use, to safeguard it from rusting and damage due to marine growth. High-quality Aluminum: The marine-grade aluminum makes it strong, corrosion-resistant, and ideal for all types of water conditions. Effortless Installation: The pre-drilled holes make the mounting easy with the help of nuts and bolts included in the package. Additional Information Installation and usage: Once you have selected the mounting spot on the dock or boat, mark holes to drill on the surface and drill the holes, wipe off to remove the debris, then align the ladder holes and secure it with included nuts and bolts. Once the installation is done, check the stability before using it. Care and Maintenance: Inspect the bolts regularly for loosening or signs of wear. Do not use harsh acidic cleaners to maintain the smooth finish, and you can clean it with plain water, mild soap, and a soft brush to remove salt, dirt, and debris. Do not leave the ladder inside the water when you are not using it.

$326.00

The 4 step wide lift ladder is quite useful, whether you want to step into your boat, enjoy a swim, or access your dock. It offers a seamless, secure movement that you can trust for safety. The ladder has a rugged marine-grade aluminum construction to survive in the toughest conditions, such as sun and saltwater exposure. The wide steps of this ladder have an anti-slippage feature as well that provides you with steady and safe stepping, especially for kids and elderly people. With an easy-to-use lift mechanism, you can quickly raise the ladder out of the water after use, preventing marine buildup and prolonging its life. Features Wide Steps: Wide and anti-slipping steps ensure every step of yours is supported, stable, and safe. Lift-Up Design: Easy to lift-up feature helps you to guard the ladder from rusting, and corrosion due to marine growth and constant contact with water.. High-quality Aluminum: Superior-quality lightweight aluminum used in the ladder body gives it strength and a longer life. Effortless Installation: Pre-drilled mounting holes are provided to make the installation easy and hassle-free. The nuts and bolts are also included. Additional Information Installation and usage: Select the mounting spot on the dock or boat, mark holes to drill on the surface, drill the holes, wipe off to remove the debris, then align the ladder holes and secure it with the included nuts and bolts. Check the stability of the ladder before using it. Care and Maintenance: Do a regular inspection of the bolts to check the loosening or signs of wear. Ensure not to use chemical-based cleaners for cleaning. You can clean it with plain water, mild soap, and a soft brush to remove salt, dirt, and debris, which also maintains the smooth finish of the metal surface. Lift up the ladder to take it out of the water when you are not using it.

$338.00

The 5 step wide lift ladder is very useful, whether you want to get into or out of your boat, enjoy a swim, or access your dock. It offers a seamless, safe movement that you can trust. The wide steps of this ladder have an anti-slippage feature as well that provides you with steady and safe stepping, especially for kids and elderly people. The ladder has a rough, high-quality aluminum structure to survive in the toughest conditions, such as sun and saltwater exposure. You can raise and lower the ladder in and out of the water quickly through an easy-to-lift mechanism that prevents corrosion and damage due to build-up. Features Wider Steps: Wider, well-supported, stable anti-slipping steps make every step of yours easy and safe. Easy to Lift-up Design: Easy lift-up design that you can safeguard from rusting and damage due to marine growth because of constant water contact. Marine-grade Aluminum: Lightweight but marine-grade aluminum gives strength, stability, and longevity to the ladder. Effortless Installation: Mounting holes are predrilled to make the installation easy with the help of included nuts and bolts. Additional Information Installation and usage: Mark holes on the selected mounting spot, drill holes on the marked surface, clean to remove the debris, then align the ladder holes and secure it with nuts and bolts included in the package. Check to ensure the stability of the ladder before you use it. Care and Maintenance: Inspect the bolts regularly for loosening or signs of wear. Use plain water, simple, mild liquid cleaners, and a soft brush to wipe off the debris that maintains the smooth finish. Do not let it submerge in water when not in use; roll and lift it up.