SWIT Electronics America

$159.00

Availability: Usually ships in 1-2 weeks S-2070 is a new light of SWIT Chip Array LED family, with smaller size and lower consumption for hand HD camcorders. The new generation LED technology, Chip Array LED, integrates the LEDs into a chip with high brightness output but in smaller size, and the most remarkable, it offers a equally spread, soft, non-glaring light, similar to the traditional Halogen bulb light. Chip Array LED S-2070 is a new light of SWIT Chip Array LED family, with smaller size and lower consumption for hand HD camcorders. The new generation LED technology, Chip Array LED, integrates the LEDs into a chip with high brightness output but in smaller size, and the most remarkable, it offers a equally spread, soft, non-glaring light, similar to the traditional Halogen bulb light. 13W Power Consumption, 70W Bulb Equivalent S-2070 requires only 13W power consumption but can output bright light equivalents to an 70W halogen bulb. The illuminance is 800 Lux at 1 meter distance and 1 meter scale. Compact Size, Ideal for HDV camcorders: S-2070 is compact size designed, smaller than SWIT S-2041 and S-2050 Chip Array LED light, and more suitable to use on small camcorders. 60° Wider Beam Angle: The traditional LED lights use lens to converge and get a higher brightness, but dropped down quickly around, which will generate a visible lighting border in the image. In comparison, the S-2070 Chip Array LED generates a 60° wider beam angle, equally spread from the center to edge, and suitable for HD shooting. Glareless light, Single Shadow: The traditional LED array always generates several highlight pots on retina and people will feel glaring, even canft recover sight until a few seconds. In comparison, the SWIT Chip Array LED has only one bulb in appearance, and output a non-glaring, single shadow light, suitable for close interview shooting. 3200K/5000K/5600K Color Temperature: The S-2070 LED has 5000K color temperature and also equipped with a 5600K (Daylight) and a 3200K (Tungsten) color temperature filter. You can switch the color temperature easily. 6-17V Wide Voltage Power Supply: The S-2070 accepts 6-17V wide voltage input, so you can get power from 14.4V V-mount/Gold Mount batteries or 7.2V DV batteries. The light package goes with a D-tap to pole-tap cable (S-7104), to plug into the DC-IN port of S-2070 and get power from D-tap power output sockets, such as batteries, battery plates, or camera handle. You can also select SWIT pole-tap to pole-tap DC cable (S-7108) to get power from pole-tap DC adaptors. By installing a particular DV battery plate, you can directly mount a 7.2V DV battery onto the rear of the S-2070 light. Interchangeable DV Plates: You can power the S-2070 by most popular DV batteries, via the easy interchangeable DV battery plates. Battery Mount Options: Mount model Original Battery SWIT Battery S-7004B Panasonic VW-VBG6 S-8BG6 S-7004C Canon BP-945/970G S-8945, S-8845 S-7004D Panasonic VBD/CGR-D S-8D58, S-8D98, S-8D62 S-7004F SONY NP-F970/770 S-8972, S-8970, S-7004I JVC SSL-JVC50 S-8I50, S-8I75 S-7004U SONY BP-U S-8U93,S-8U63 Power by Special Compact Battery: By optional purchased battery S-8040 If you want a compact battery power solution, you may choose SWIT S-8040 Li-ion battery to instead of the DV plates and DV batteries. The S-8040 is specially used for SWIT S-2041 and S-2070 lights, with 7.2V, 21Wh/3Ah capacity, and can run nearly 1 hour and 40 minutes on S-2070. The S-8040 has a 4-level power indicators and a pole-tap charging input socket. You can use SWIT portable Pole-tap charger S-3010D to charger S-8040. Dimmer control: S-2070 has a dimmer controller to adjust the light output from 10%-100%. The color temperature will not change during the dimmer controlling. Easy Installation: S-2070 offers a dual purpose installation base, that can be fixed to camera via both cold shoe and 1/4h screw head.

$4850.00

Availability: Usually ships in 1-2 weeks S-4904 is the broadcast industry wireless system, includes an S-4904T transmitter and an S-4904R receiver, with WHDI (OFDM) technology, supports uncompressed 3G/HD/SD-SDI and HDMI wirelessly transmitted in 2200ft scale, and with less than 1ms latency. The system is pure hardware connection, plug and play build-up, which is widely used in on-site shooting and director monitoring.

$2850.00

Availability: Usually ships in 2-3 weeks SWIT S-4915 is a set of wireless video transmission system with one transmitter and one receiver. With WHDI (OFDM) technology, the system supports uncompressed 3G/HD/SD-SDI and HDMI dual video format signals wirelessly transmitted up to 492ft(150meter) with less than 1ms latency. It captures the resolution at 1080p up to 60 fps uncompressed 3GSDI and HDMI dual format video signal. The S-4915 wireless system operates on a license-free frequency 5.1GHz-5.9GHz. It also supports multicast function that 1 transmitter with multi receivers. Both transmitter and receiver can be powered by Sony L series battery via attached battery mount or can be powered via pole DC input of 6.5-17V.

$670.00

Availability: Usually ships the next business day. Long-lasting power solution for high draw devices S-4010 power station box can install 4 pieces of V-mount batteries which can provide more power and longer power supply time comparing to single Li-ion battery. It can meet the demand of different users, and is very suitable for Cine cameras, lightings for Film & Television and mobile studios. PP+ Fiber glass case, strong and durable S-4010 adopts PP+ Fiber glass case which is high intensity, high toughness and high temperature resistant. Power with 4 V-lock batteries, portable and usable Considering the size, weight, power effeciency, and usability, S-4010 is designed to be powered with 1-4 V-lock batteries, which are widely used and easy to find. S-4010 is compatible with all the SWIT V-lock batterie, or 3rd party batteries with dimensions less than 168(L)x101(W)x65(H)mm. Auto-balanced circuit design With auto-balanced circuit, S-4010 can be powered by 1-4 batteries, with different capacity. The max output is limited by the batteries output. 2-ch 4-pin XLR DC output With 2-ch 4-pin XLR output sockets, S-4010 is capable of outputing 2-ch 11-16.8V, max 15A power simultaneously. And S-4010 is designed with multiple circuit protections, such as over load, over voltage, and etc. LED panel display status With a LED panel, S-4010 can display real-time voltage, and when battery capacity is too low, the LED panel will keep flashing to remind you to change or charge batteries. Charging without taking out batteries With the supplied 5A charger, user can charge the batteries in the S-4010 directly, without taking out of them. Cooling fan design The fan keeps dissipating heat from the box, and makes it safe when working in high temperature environment.

$760.00

Availability: Usually ships in 2-3 weeks Long-lasting power solution for high draw devices S-4020 power station box can install 4 pieces of V-mount batteries which can provide more power and longer power supply time comparing to single Li-ion battery. It can meet the demand of different users, and is very suitable for Cine cameras, lightings for Film & Television and mobile studios. PP+ Fiber glass case, strong and durable S-4020 adopts PP+ Fiber glass case which is high intensity, high toughness and high temperature resistant. Power with 4 V-lock batteries, portable and usable Considering the size, weight, power effeciency, and usability, S-4020 is designed to be powered with 1-4 V-lock batteries, which are widely used and easy to find. S-4020 is compatible with all the SWIT V-lock batterie, or 3rd party batteries with dimensions less than 168(L)x101(W)x65(H)mm. Auto-balanced circuit design With auto-balanced circuit, S-4020 can be powered by 1-4 batteries, with different capacity. The max output is limited by the batteries’ output. 2 channels XLR high load DC output selection Select 4-pin XLR 11-16.8V 15A(180W) or 3-pin XLR 22-33.6V15A(360W) to DC output And S-4020 is designed with multiple circuit protections, such as over load, over voltage, and etc. LED panel display status With a LED panel, S-4020 can display real-time voltage, and when battery capacity is too low, the LED panel will keep flashing to remind you to change or charge batterie. Charging without taking out batteries With the supplied 5A charger, user can charge the batteries in the S-4020 directly, without taking out of them. Cooling fan design The fan keeps dissipating heat from the box, and makes it safe when working in high temperature environment.

$760.00

Availability: Usually ships in 2-3 weeks Long-lasting power solution for high draw devices S-4030 power station box can install 4 pieces of V-mount batteries which can provide more power and longer power supply time comparing to single Li-ion battery. It can meet the demand of different users, and is very suitable for Cine cameras, lightings for Film & Television and mobile studios. PP+ Fiber glass case S-4030 adopts PP+ Fiber glass case which is high intensity, high toughness and high temperature resistant. Power with 4 V-lock batteries Considering the size, weight, power effeciency, and usability, S-4030 is designed to be powered with 2-4 V-lock bat- teries. With auto-balanced circuite design, the different models and capacities batteries can be mixed. The max output power is limited by battery inside. 2-ch 4-pin XLR DC output With 2-ch 3-pin XLR output sockets, S-4030 is capable of outputing 2-ch 22-33.6V, max 15A power simultaneously. And S-4030 is designed with multiple circuit protections, such as over load, over voltage, and etc. LED panel display status With a LED panel, S-4030 can display real-time voltage, and when battery capacity is too low, the LED panel will keep flashing to remind you to change or charge batteries. Charging with batteries inside With the supplied 5A charger, user can charge the batteries in the S-4030 directly, without taking out of them. Cooling fan design The fan keeps dissipating heat from the box, and makes it safe when working in high temperature environment.

$260.00

Availability: Usually ships in 1-2 weeks Chip Array LED technology Single shadow, glareless Super high CRI =97 30W, 1300Lux @ 1 meter, dimmable 60° wide beam angle, equally spread Fresnel lens, raise to 4000Lux@1m 2700K-5600K continuously adjustable 6-17V wide input voltage D-tap power lead Glass Fiber strong and durable housing Screw and cold shoe mount

$259.00

Availability: Usually ships the next business day The S-2041 on-camera LED light adopts the new generation LED technology called Chip Array LED, which integrates the LEDs into a chip with high brightness output but in smaller size, and the most remarkable, it offers a equally spread, soft, glareless light, similar to the traditional Halogen bulb light.

$3550.00

Availability: Usually ships in 3-4 weeks. The M-1093F adopts 2× 9-inch IPS (In-Plane Switching) LCD panels, with Full HD 1920×1200 resolution and LED backlight, 800:1 contrast. The viewing angle is Horizontal: 170° / Vertical: 170°

$1950.00

Availability: Usually ships in 2-3 weeks. This is SWIT's first 9-inch FHD waveform monitor, S-1093F, with 1920×1200 resolution IPS LCD panel, 2K/3G/HD/SD-SDI and HDMI input, provides broadcast technical reference patterns- waveform, vector scope, histogram, and up to 16-ch audio meters with alert, select any 2-ch audio to output. Moreover, the peaking focus assist, false color, R/G/B/Mono, H/V delay, UMD, AFD, scale markers are useful functions for broadcast field and studio monitoring.

$1800.00

Availability: Usually ships the next business day. 17.3-inch Full HD Studio LCD Monitor (AH-IPS LCD panel, LED backlight) S-1173H adopts a 17.3 -inch IPS (In-Plane Switching) LCD panel, Full HD 1920×1080 resolution and LED backlight, 700:1 contrast for accurate color reproduction. The viewing angle is Horizontal: 160° / Vertical: 160°.

$2300.00

Availability: No longer available. 17.3-inch Full HD Studio LCD Monitor (AH-IPS LCD panel, LED backlight) S-1173F adopts a 17.3 -inch IPS (In-Plane Switching) LCD panel, Full HD 1920×1080 resolution and LED backlight, 700:1 contrast for accurate color reproduction. The viewing angle is Horizontal: 160° / Vertical: 160°.

$209.00

Availability: Usually ships the next business day S-8073N is a NP-1 type rechargeable Li-ion battery for professional video cameras and audio mixers with NP-1 battery connections. It has 73Wh / 5.1Ah high capacity, not restricted by IATA air transportation regulations. It also has a 4-level LED power indicator for giving a quick reference of remaining power of battery. S-8073N has two 14.4V D-tap DC out sockets for powering multi devices simultaneously. The built-in intelligent circuit has multiple protections in case of abnormal current, voltage or temperature.

$91.00

Availability: Usually ships the next business day S-8970 is a 7.2V, 47.5Wh Li-ion DV battery compatible with SONY L series NP-F770/970/960/950 batteries. The build-in intelligent circuit has multiple protections of abnormal current, voltage and temperature. Compatible with: All devices with Sony BP-F plate; SONY HXR-NX100 / NX5R, PXW-Z150; SONY NXR-MC2000 / HD1000; SONY HVR-Z1 / Z5 / Z7 / V1SONY NEX-FS100 / FS700 / EA50; SONY DSR-PD150 / PD170 / PD190; ZCAM E2 / E2-M4 / E2-S6 / E2-S6G / E2-F6 / E2-F8 NOT Compatible: ARRI HI-5, ARRI ZMU-4 (Battery slot physical size limitation) Warranty Period: One year conditional.

$90.00

Availability: Usually ships the next business day S-8972 is a 7.2V, 47Wh Li-ion DV battery compatible with Sony L series NP-F770/970/960/950 batteries. It has a 7.2V/5.5mm pole DC output socket which can power camera and SWIT S-2010 on-camera LED light simultaneously. S-8972 also has a 4-level LED indicator to give you a view of remaining power before mounting to camera. The build-in intelligent circuit has multiple protections of abnormal current, voltage and temperature. (on-camera LED light sold separately) Compatible with: All devices with Sony BP-F plate; SONY HXR-NX100 / NX5R, PXW-Z150; SONY NXR-MC2000 / HD1000; SONY HVR-Z1 / Z5 / Z7 / V1SONY NEX-FS100 / FS700 / EA50; SONY DSR-PD150 / PD170 / PD190; ZCAM E2 / E2-M4 / E2-S6 / E2-S6G / E2-F6 / E2-F8 NOT Compatible: ARRI HI-5, ARRI ZMU-4 (Battery slot physical size limitation) Warranty Period: One year conditional.

$98.00

Availability: Usually ships the next business day S-8D62 is a 7.2V, 47Wh Li-ion DV battery compatible with Panasonic CGA series D54S/D28S batteries. It has a 7.2V/5.5mm pole DC output socket which allows to power the camera and other devices simultaneously. S-8D62 also has a 4-level LED indicator to give you a view of remaining power before mounting to the camera. The built-in intelligent circuit has multiple protections of abnormal current, voltage and temperature. The S-8D62 can be charged on SWIT Dual channel charger S-3602D or SWIT 4-ch charger LC-D421D. It takes about 4 hours and 30 minutes to charge from empty to 100%. And you can also use the SWIT S-3010D Portable Pole-tap Charger for S-8D62. It will take 7 hours to fully charge. Compatible with: Panasonic AJ-PX230/270, AG-HVX200/201; Panasonic AG-HPX170/250, AG-DVX100; Panasonic AG-3DA1, AG-AC8/AC30/AC90; Panasonic AG-DVC7/15/30/60/80/180 Warranty Period: One year conditional.

$120.00

Availability: Usually ships the next business day S-8D58 is 43Wh the replacement battery for Panasonic VW-VBD Series (VW-VBD58, AG-VBR59P, AG-VBR89G and AG-VBR118G). Compatible with: Panasonic AU-EVA1, AV-DVX200, AJ-PX230/270; Panasonic AJ-UPX360, AG-CX350/370, AG-UX90/180; Panasonic AG-DVC30, AG-DVX100, AG-HVX200/201; Panasonic AG-HPX171/250, AG-AC30 Compatible with Original Charger: AG-BRD50 NOT Compatible: AG-CX10/18/20, HC-X1200/X1500/X1600/X2000/X2100 (Battery slot physical size limitation) 43Wh/6000mAh Capacity With 7.2V nominal voltage, the S-8D58 has 43Wh / 6000mAh capacity, and can run approx. 2 hours on AJ-PX270 series camcorders when LCD monitor is on. Build-in Pole-tap DC Socket A 5.5/2.1mm pole-tap DC output socket is equipped on the S-8D58 battery, for DC 7.2V (Nominate) connection. You can connect on-camera LED light, monitor or wireless transmitter on the pole-tap socket, and get power simultaneously with camera. The Max power from the pole-tap is 30W, 4A. The Pole-tap socket can also be used as charging input, by SWIT portable charger S-3010D. Build-in 5V/1A USB Socket It’s rather a fantastic function to have a USB socket on the DV battery! Connect your smart phone or pad to the USB socket, press the “Check” button, and then the S-8D58 starts to output 5V/1A power to charge your devices! 4-level LED Power Indicator The S-8D58 battery has the 4-level LED power indicators to check the battery remaining capacity. You can get a quick view of capacity before using. Easy Charging The S-8D58 can be charged on Panasonic original charger DE-A88, and SWIT also provides the Dual channel charger S-3602D for S-8D58, will take about 4 hours to charge from empty to 100%. And you can also use SWIT S-3010D Portable Pole-tap Charger for S-8D58. It will take 7 hours to fully charge. Warranty Period: One year conditional.

$180.00

Availability: Usually ships the next business day S-8D98 is 70Wh the replacement battery for Panasonic VW-VBD Series(VW-VBD58, AG-VBR59P, AG-VBR89G and AG-VBR118G). Compatible with: Panasonic AU-EVA1, AV-DVX200, AJ-PX230/270; Panasonic AJ-UPX360, AG-CX350/370, AG-UX90/180; Panasonic AG-DVC30, AG-DVX100, AG-HVX200/201; Panasonic AG-HPX171/250, AG-AC30 Compatible with Original Charger: AG-BRD50 NOT Compatible: AG-CX10/18/20, HC-X1200/X1500/X1600/X2000/X2100 (Battery slot physical size limitation) 70Wh/9800mAh Capacity With 7.2V nominal voltage, the S-8D98 has 70Wh / 9800mAh capacity,and can run approx 3 hours on AJ-PX270 series camcorders when LCD monitor is on. Build-in Pole-tap DC Socket A 5.5/2.1mm pole-tap DC output socket is equipped on the S-8D98 battery, for DC 7.2V (Nominate) connection. You can connect on-camera LED light, monitor or wireless transmitter on the pole-tap socket, and get power simultaneously with camera. The Max power from the pole-tap is 30W, 4A. The Pole-tap socket can also be used as charging input, by SWIT portable charger S-3010D. Build-in 5V/1A USB Socket Use S-8D98 as Power Station to your cell phone! It’s rather a fantastic function to have a USB socket on the DV battery! Connect your smart phone or pad to the USB socket, press the “Check” button, and then the S-8D98 starts to output 5V/1A power to charge your devices! 4-level LED Power Indicator The S-8D98 battery has 4-level LED power indicators to check the battery remaining capacity. You can get a quick view of capacity before using it. Easy Charging The S-8D98 can be charged on Panasonic original charger DE-A88, and SWIT also provides the Dual channel charger S-3602D for S-8D98, will take about 6 hours to charge from empty to 100%. And you can also use SWIT S-3010D Portable Pole-tap Charger for S-8D98. It will take 9.5 hours to fully charge. Warranty Period: One year conditional.

$75.00

Availability: Usually ships the next business day S-8823 is the replacement battery for JVC BN-VF823, compatible with JVC 180/170/150/100/101/70 series. S-8823 can exchange digital info with the cameras, and display remaining power info on the camera viewfinder.

$155.00

Availability: Usually ships the next business day S-8i50 is the replacement battery for SSL-JVC50/SSL-JVC75, compatible with JVC camera GY-LS300, GY-HM650/600/250/200/HMQ10. S-8i50 can exchange digital info with the JVC cameras, and display remaining power info on the camera viewfinder.

$91.00

Availability: Usually ships the next business day Product Description Li-ion battery pack of 7.2V nominal voltage Comparable to Canon BP series DV battery 47Wh / 6.6Ah capacity Multiple circuit protections Canon BP series Replacement battery S-8945 is the replacement battery for Canon BP series BP-945/BP-970G, compatible with Canon XF100/105/300/305, XH-A1, XL-H1, etc. 47Wh / 6.6Ah Capacity With 7.2V nominal voltage, the S-8945 has 47Wh / 6.6Ah capacity, and can run approx 5 hour on Canon XF305 camcorder when LCD monitor is on. Easy Charging The S-8945 can be charged on SWIT Dual channel charger S-3602C. It takes about 4 hours and 30 minutes to charge from empty to 100%. Note: S-8945 does not applicable on Canon C-100 camera. Warranty Period: One year conditional.

$59.00

Availability: Usually ships the next business day Li-ion battery pack of 7.2V nominal voltage Comparable to Canon BP-955 RED KOMODO compatible 47Wh / 6.6Ah capacity 4-level LED power indicator 7.2V/5.5mm Pole-tap DC output Multiple circuit protections

$169.00

Availability: Usually ships the next business day Canon BP series DV battery Charger S-3602C is a dual channel charger for SWIT S-8845, and compatible with Canon BP series DV batteries. Dual Channel Simultaneous Charging S-3602C has 2 charging channels, with DC 8.4V, 1.8A charging output for each channel, and can charge 2 batteries simultaneously. The 4-level LED charging indicators are provided for each channel which indicate the real time capacity by percentage when charging. AC-DC Adapting Output S-3602C has 2x 5.5mm/2.1mm pole sockets for DC adapting output. The DC outputs work simultaneously and provides DC 8.4V, 3.5A in total. Optional accessory: S-7500C dummy Canon BP series battery adaptor for adapting Canon DV cameras, or the equipments with Canon BP series battery mounts. Item includes: 1 x S-3602C charger Related Items: SWIT S-8845 DV battery for Canon SWIT S-8945 DV battery for Canon

$169.00

Availability: Usually ships the next business day JVC BN-VF823 DV Charger S-3602V is a dual channel charger for SWIT S-8823, and compatible with JVC BN-VF823 DV battery. Dual Channel Simultaneous Charging S-3602V has 2 charging channels, with DC 8.4V, 1.8A charging output for each channel, and can charge 2 batteries simultaneously. The 4-level LED charging indicators are provided for each channel, which indicate the real time capacity by percentage when charging. AC-DC Adapting Output S-3602V has 2x 5.5mm/2.1mm pole sockets for DC adapting output. The DC outputs work simultaneously and provides DC 8.4V, 3.5A in total. Item includes: 1 x S-3602V charger Related Items: SWIT S-8823 DV battery for JVC BN-VF823

$169.00

Availability: Usually ships the next business day SSL-JVC50 DV battery Charger S-3602I is a dual channel charger for SWIT S-8i50, and compatible with SSL-JVC50 DV battery that used on JVC GY-HM600/650/HMQ10 cameras. Dual Channel Simultaneous Charging S-3602I has 2 charging channels, with DC 8.4V, 1.8A charging output for each channel, and can charge 2 batteries simultaneously. The 4-level LED charging indicators are provided for each channel,which indicate the real time capacity by percentage when charging. AC-DC Adapting Output S-3602I has 2x 5.5mm/2.1mm pole sockets for DC adapting output. The DC outputs work simultaneously and provides DC 8.4V, 3.5A in total. Optional accessory: S-7500i dummy battery adaptor for adapting JVC GY-HM600/650 cameras, or the equipments with SSL-JVC50 battery mounts. Item includes: 1 x S-3602i charger Related Items: S-8i75 60Wh Battery for JVC SSL-JVC75 S-8i50 47Wh Battery for JVC SSL-JVC50

$169.00

Availability: Usually ships the next business day S-3602D is a dual channel charger and adaptor for SWIT S-8D58/8D98 and S-8D62, and compatible with Panasonic VW-VBD58 and CGA series D54, D28 DV batteries. S-3602D has 2 charging channels, with DC 8.4V, 2A charging output for each channel, and can charge 2 batteries simultaneously. The 4-level LED charging indicators are provided for each channel, which indicate the real time capacity by percentage when charging. S-3602D has 2x 5.5mm/2.1mm pole sockets for DC adapting output. The DC outputs work simultaneously and provides DC 8.4V, 3.5A in total. Optional accessory: S-7500P dummy Panasonic CGA series battery adaptor for adapting Panasonic DV cameras that use VW-VBD58, AG-VBR59 or CGA-D54/D28 series batteries, or the equipments with the above battery mounts. Item includes: 1 x S-3602D Charger Related Items: SWIT S-8D98 70Wh Battery for Panasonic SWIT S-8D58 43Wh Battery for Panasonic

$169.00

Availability: Usually ships the next business day S-3602B is a dual channel simultaneous charger of S-8BG6 and compatible with Panasonic VW-VBG6 battery. It has 2-channel 7.2V DC adapter output for Panasonic cameras HMC70/150 and AF100. It is also available for charging in one channel and adapting in the other channel. Item includes: 1 x S-3602B charger.

$169.00

Availability: Usually ships the next business day SONY L series (NP-F) DV battery Charger S-3602F is a dual channel charger for SWIT S-8972, S-8970, S-8770, and compatible with SONY L series NP-F970/770 DV batteries. Dual Channel Simultaneous Charging S-3602F has 2 charging channels, with DC 8.4V, 1.8A charging output for each channel, and can charge 2 batteries simultaneously. The 4-level LED charging indicators are provided for each channel, which indicate the real time capacity by percentage when charging. AC-DC Adapting Output S-3602F has 2x 5.5mm/2.1mm pole sockets for DC adapting output. The DC outputs work simultaneously and provides DC 8.4V, 3.5A in total. Optional accessory: S-7500F dummy SONY L series battery adaptor for adapting SONY DV cameras that use L series batteries, or the equipments with SONY L series battery mounts. Item includes: 1 x S-3602F Charger Related Items: SWIT S-8972 DV battery for Sony SWIT S-8970 DV battery for Sony SWIT S-7500 battery shaped adaptor

$169.00

Availability: Usually ships the next business day SONY BP-U series DV battery Charger S-3602U is a 2-channel charger is for S-8U65/S-8U95 and Sony BP-U series DV batteries. Intelligent Dual Channel Charging S-3602U has 2 charging channels, DC 16.7V, 1.9A output,and can charge 2 batteries sequentially to 75% capacity,and then charge both batteries simultaneously to full. The 4-level LED charging indicators are provided for eachchannel, which indicate the real time capacity by percentage when charging. AC-DC Adapting Output S-3602U has a 5.5mm/2.1mm pole socket of DC12V, 1.9A adapting output. The package also provides a DC cable for adapting SONY cameras.

$240.00

Availability: Usually ships the next business day S-8082A is a lightweight 95Wh Gold-mount battery, with a D-tap socket for camera light or other equipments. It has a 4-level LED indicator to give the user a view of remaining power before mounting to camera. The Li-ion contents of S-8082A comply with the IATA safe air transportation regulations. It is not restricted from being taken onto an airplane or shipped as air cargo.

$340.00

Availability: Usually ships the next business day Large Capacity Battery, Complied with IATA The IATA DGR regulations restricted the air transportation of over 100Wh Li-ion battery packs: Battery Capacity Carry-on Baggage Air Cargo Shipping Under 100Wh OK OK 100Wh-160Wh Only 2pcs allowed Not allowed Over 160Wh Not allowed Not allowed Since the large capacity batteries are quite necessary, SWIT provides the solution of Dividable Battery to comply with IATA regulations. S-8152A can be divided into 2 parts, and each part contains 73Wh capacity, not restricted by air transportation. And when using S-8152A, just assemble the 2 parts, you can get a Li-ion battery pack of 146Wh large capacity. Note: The restrictions may be different between different airlines.

$460.00

Availability: Usually ships the next business day Large Capacity Battery, Complied with IATA The IATA DGR regulations restricted the air transportation of over 100Wh Li-ion battery packs: Battery Capacity Carry-on Baggage Air Cargo Shipping Under 100Wh OK OK 100Wh-160Wh Only 2pcs allowed Not allowed Over 160Wh Not allowed Not allowed Since the large capacity batteries are quite necessary, SWIT provides the solution of Dividable Battery to comply with IATA regulations. S-8192A can be divided into 2 parts, and each part contains 92Wh capacity, not restricted by air transportation. And when using S-8192A, just assemble the 2 parts, you can get a Li-ion battery pack of 184Wh large capacity. Note: The restrictions maybe are different between different airlines.

$315.00

Availability: Usually ships in 1-2 weeks S-8083A is the AntonBauer gold mount rechargeable Li-ion battery pack for professional video cameras.It’s compact design, smaller in size.

$355.00

Availability: Usually ships in 1-2 weeks Adopt High-Load Li-ion Cells Normal Li-ion batteries offer 100W/8A output and suitable for most ENG cameras, but the Cine Cameras such as ALEXA require around 85W high draw which is too heavy for the normal Li-ion batteries: the battery life will be reduced if long time full draw powering. Moreover, if there’re monitor, lighting work together, and total power will be above 100W, and the normal batteries can not draw completely. Using S-8113A high-load battery, you can get MAX 150W/12A constant power output, which can drive more high power cameras, lightings and other equipments easily, and won’t reduce battery life during long time high power output.

$545.00

Availability: Usually ships in 1-2 weeks Adopt High-Load Li-ion Cells Max 250W, 20A constant power output Perfect for high draw power application. Using S-8183A high-load battery, you can get MAX 250W/20A constant power output, which can drive more high power cameras, lightings and other equipments easily, and won’t reduce battery life during long time high power output. 240Wh / 16.7Ah High Capacity Consists of 24pcs 18650 battery cells, and reaches 240Wh / 16.7Ah high capacity. Can run approx 8 hours for normal 30W ENG cameras; and approx 2.5 hours for ARRI Alexa camera 6A Fast Charging S-8183A supports 6A fast charging, saving more than 50% charging time, can be charged from 0 to 80% after 2.5 hours, and fully charged within 3.8 hours. Build-in D-tap DC Output Socket A D-tap DC output socket is equipped on the top side of S-8183A battery, for DC14.4V (Nominate) connection, such as on-camera lights, monitors, wireless transmitter, etc. Max Power from D-tap is 120W, 10A. 4-level LED Power Indicator On the side of the battery, there’re 4-level LED power indicators to check the battery remaining capacity. You can get a quick view of capacity before using.

$375.00

Availability: Usually ships the next business day SC-304A is a 2-channel simultaneous charger for gold mount batteries, which can automatically recognize the type of battery being charged (Li-ion, Ni-MH and Ni-Cd). The charging output is DC 14-20V, 1.9A each channel. The SC-304A has LED charging indicators on the front panel, indicates the real time capacity of each channel by different colors when charging. Warranty Period: Two years conditional.

$269.00

Availability: Usually ships in next business days The portable charger S-3822A can charge 2 Gold mount batteries simultaneously. The charging output is DC 16.8V, 3A×2. 【Please note that batteries are sold separately】 Key Features: Gold mount battery charger 2-ch simultaneous charging 3A charging current per channel LED charging indicators Support AC to 4-pin XLR output Light weight and portable

$750.00

Availability: Usually ships in next business days S-3812A can charge 2 Gold mount batteries simultaneously at Max 6A fast charging current, to SWIT particular batteries. The charging speed is quite faster than normal chargers. The following battery models support 6A fast charging: S-8340A, S-8360A, D-8161A And for other batteries, the charging current is 3A. Key Features: 2-ch simultaneous charging Identify battery type and adjust charging method 6A fast charging for SWIT particular batteries 3A charging for normal batteries Support AC to 4-pin XLR output Support battery to 4-pin XLR output LCD display charging/adapting info

$295.00

Availability: Usually ships the next business day The S-3802A has 2 Gold mount plates and can charge 2 batteries one-by-one sequentially. The charging output is DC 14-20V, 1.9A. Key Features: Gold mount battery charger 2-ch sequential charging LED charging indicators 1-ch AC-DC adaptor through 4-pin XLR Light weight and portable

$270.00

No Longer Available S-8082S is a lightweight 95Wh V-mount battery, with a D-tap socket for camera light or other equipments. It has a 4-level LED indicator to give the user a view of remaining power before mounting to camera. The Li-ion contents of S-8082S comply with the IATA safe air transportation regulations. It is not restricted from carry-on nor from shipping as air cargo.

$460.00

Availability: Usually ships the next business day Large Capacity Battery, Complied with IATA The IATA DGR regulations restricted the air transportation of over 100Wh Li-ion battery packs: Battery Capacity Carry-on Baggage Air Cargo Shipping Under 100Wh OK OK 100Wh-160Wh Only 2pcs allowed Not allowed Over 160Wh Not allowed Not allowed Since the large capacity batteries are quite necessary, SWIT provides the solution of Dividable Battery to comply with IATA regulations. S-8192S can be divided into 2 parts, and each part contains 92Wh capacity, not restricted by air transportation. And when using S-8192S, just assemble the 2 parts, you can get a Li-ion battery pack of 184Wh large capacity. Note: The restrictions maybe are different between different airlines.

$315.00

Availability: Usually ships in 1-2 weeks S-8083S is the V-mount rechargeable Li-ion battery pack for professional video cameras. It’s compact design, smaller in size.

$355.00

Availability: Usually ships in 1-2 weeks Adopt High-Load Li-ion Cells Normal Li-ion batteries offer 100W/8A output and suitable for most ENG cameras, but the Cine Cameras such as ALEXA require around 85W high draw which is too heavy for the normal Li-ion batteries: the battery life will be reduced if long time full draw powering. Moreover, if there’re monitor, lighting work together, and total power will be above 100W, and the normal batteries can not draw completely. Using S-8113S high-load battery, you can get MAX 150W/12A constant power output, which can drive more high power cameras, lightings and other equipments easily, and won’t reduce battery life during long time high power output.

$560.00

Availability: Usually ship next business day Adopt High-Load Li-ion Cells 250W, 20A constant power output Using S-8183S high-load battery, you can get at least 250W/20A con stant power output, which can drive more high power cameras, lightings and other equipments easily, and won’t reduce battery life during long time high power output. 240Wh/16.7Ah High Capacity Consists of 24pcs 18650 battery cells, and reach 240Wh/16.7Ah high capacity. Can run approx 8 hours for normal 30W ENG cameras; and approx 2.5 hours for ARRI Alexa camera 6A Fast Charging S-8183S supports 6A fast charging, saving more than 50% charging time, can be charged from 0 to 80% after 2.5 hours, and fully charged within 3.8 hours. Build-in D-tap DC Output Socket A D-tap DC output socket is equipped on the top side of S-8183S battery, for DC14.4V (Nominate) connection, such as on-camera lights, monitors, wireless transmitter, etc. Max Power from D-tap is 120W, 10A. 4-level LED Power Indicator On the side of the battery, there’re 4-level LED power indicators to check the battery remaining capacity. You can get a quick view of capacity before using.

$280.00

Availability: Usually ships the next business day Digital Li-ion Battery S-8320S is a 80Wh V-mount battery, for Cine and ENG cameras, with latest designed dual housing heavy duty structure, drop-off proof and water proof. The battery supports digital power info display, which is an ideal power solution for field applications.

$450.00

Availability: Usually ships the next business day S-8340S is a 160Wh V-mount battery, for Cine and ENG cameras, with latest designed dual housing heavy duty structure, drop-off proof and water proof. The battery supports high load, fast charging and digital power info display, which is an ideal power solution for field applications.

$65.00

Availability: Usually ships the next business day PC-U130S is an ultra portable charger for V-Mount batteries, and can be directly connected to the pins of the battery. Applicable batteries: Sony and SWIT V-Mount batteries, S-8192S/S-8152S/S-8180S/S-8082S/D-8161R. LED Charging Indicator The PC-U130S has an LED charging indicator. It's red during charging, and turn to green when charging finished. Note: PC-U130S charger is not compatible with IDX batteries. Warranty Period: two years conditional.

$375.00

Availability: Usually ships the next business day SC-304S is a 2-channel simultaneous charger for Sony and SWIT V-mount batteries, which can automatically recognize the type of battery being charged (Li-ion, Ni-MH and Ni-Cd). The charging output is DC 14-20V, 1.9A each channel. The SC-304S has LED charging indicators on the front panel, indicates the real time capacity of each channel by different colors when charging. 【Please note that batteries are sold separately】 Warranty Period: Two years conditional.

$269.00

Availability: Usually ships in next business days The portable charger S-3822S can charge 2 V-mount batteries simultaneously. The charging output is DC 16.8V, 3A×2. Key Features: V-mount battery charger 2-ch simultaneous charging 3A charging current per channel LED charging indicators Support AC to 4-pin XLR output Light weight and portable

$780.00

Availability: Usually ships in next business days S-3812S can charge 2 V-mount batteries simultaneously at Max 6A fast charging current, to SWIT particular batteries. The charging speed is quite faster than normal chargers. The following battery models support 6A fast charging: S-8340S, S-8360S, D-8161S And for other batteries, the charging current is 3A. Key Features: 2-ch simultaneous charging Identify battery type and adjust charging method 6A fast charging for SWIT particular batteries 3A charging for normal batteries Support AC to 4-pin XLR output Support battery to 4-pin XLR output LCD display charging/adapting info

$295.00

No Longer Available The S-3802S has 2 V-mount plates and can charge 2 batteries one-by-one sequentially. The charging output is DC 14-20V, 1.9A. 【Please note that batteries are sold separately】 Key Features: V-mount battery charger 2-ch sequential charging LED charging indicators 1-ch AC-DC adaptor through 4-pin XLR Light weight and portable

$389.00

S-4610 is a portable mini converter of SDI audio embedder, supports digital audio or analog audio to embed, and SDI up to 3Gb/s. It’s widely used in broadcast field production and professional audio/video conversion and transmission.

$389.00

S-4609 is a portable mini converter of SDI audio de-embedder, supports up to 3Gb/s SDI, and can be widely used in broadcast field production and professional audio/video conversion and transmission.

$480.00

Availability: Usually ships the next business day The S-4606 is a portable Optical fiber to 3G/HD/SD-SDI converter. The single-mode fiber ensures max 20km reliable transmission, and support hot swap of optical module. The S-4606 is heavy duty housing design, protecting the BNC connectors well, and supplied various screw threads in the bottom, for convenient installing.

$480.00

Availability: Usually ships the next business day The S-4605 is a portable mini converter for SDI to LC single mode Optical Fiber converter, widely used on transmitting SDI in a long distance.

$225.00

Availability: Usually ships the next business day S-4604 is a portable Mini converter for distributing 1 SDI input to 4 SDI output, supports up to 3Gb/s SDI, with embedded information, widely used on broadcast projects.

$245.00

Availability: Usually ships the next business day S-4601 is a HDMI to 3G/HD/SD-SDI converter. It supports HDMI audio embedded into SDI output; analog audio (3.5mm socket) input, embedded into SDI output. S-4601 is heavy duty housing design, protecting the BNC connectors well, and supplied various screw threads in the bottom, for convenient installing, and future accessories (battery mount, etc) Standard Package S-4601 standard package includes: 1x AC-DC power adaptor (A-PA03) 1x Install plate (A-IP00) Warranty Period: Two years conditional.

$235.00

Availability: Usually ships the next business day The S-4600 is a portable 3GSDI to HDMI converter. It converts the 3GSDI with its embedded audio to HDMI output, and supports 3GSDI loop through output and SDI embedded audio via 3.5mm earphone output. The S-4600 is heavy duty housing design, protecting the BNC connectors well, and supplies various screw threads at the bottom, for convenient installing, and future accessories (battery mount, etc.) Standard Package S-4600 standard package includes: 1x AC-DC power adaptor (A-PA03) 1x Install plate (A-IP00) Warranty Period: Two years conditional.

$259.00

Availability: Usually ships the next business day S-4612 is a mini converter for DVI to SDI conversion, (DVI-D, 18+1 connector), which can be widely used for DVI video source to deliver and broadcast, support up to 1080p 50/60 format DVI to convert to SDI.

$259.00

Availability: Usually ships the next business day S-4611 is a mini converter for SDI to DVI conversion, (DVI-D, 18+1 connector), which can be widely used to display up to 3Gb/s broadcast SDI video on DVI monitor, televisions, LED board or projectors.

$1550.00

Availability: Usually ships the next business day. S-2330 is a studio LED spot light, with Chip-on-board LEDs of 50,000 hours lifetime, and generates 300W light output, which is an ideal light source for broadcast studio and field video productions. Spot /Flood Adjust S-2330 outputs 20° - 70° beam angle by adjusting position of the LED board, and 0-100% non-flickering dimmable. The following output illuminace at different distance is for reference: Distance 20°Spot 70°Flood 3 meters 5940Lux 913Lux 5 meters 2139Lux 364Lux 7 meters 1090Lux 193Lux Bi-color temperature S-2330 LED board alternated with 3000K and 8000K LEDs, and the output color temperature can be continuously adjustable between 3000K and 8000K. High Color Reveal Ability CRI (Color Rendering Index) is a measure of the ability of a light source to reveal the colors of various objects faithfully in comparison with a natural light source. And TLCI (Television Lighting Consistency Index) is special for the color reveal ability by camera sensor. Max value 100. The normal LED light has 80-85 CRI or TLCI, while S-2330 offers the super high CRI at 95 and TLCI at 95, and will not lost the object original colors. DMX512 Control S-2330 adopts standard 5-pin DMX in/out port, supports DMX512 protocol, and adjusts dimmer and color temperature by DMX controller. The dimmer and color temperature occupy 1 DMX address respectively. The DMX address is set by 10x binary DIP switchers, and displayed by LED. LCD screen display The rear LCD screen can display the current dimmer percentage, color temperature value, and supports touch control to adjust. Silent Mode S-2330 adopts silent fans to radiate heat, which will not affect normal shooting environment to record audio. While in strictly silent required broadcast environment, S-2330 can be switched to “Silent Mode” to turn off the fans. And meanwhile, the max brightness will be reduced to 50%. Sleep Mode S-2330 supports “Sleep Mode”: you can switch off the light by pressing the DIMMER knob, to enter Sleep Mode. And press the DIMMER knob again; the S-2330 can be quickly light up to the previous dimmer value. 4-leaf Metal Barn Door S-2330 is equipped with 4-leaf metal barn doors, dismountable and rotatable. Meanwhile, the light provides a special black-out cloth to prevent the light leakage. Mounting Options The yoke mounting options for light stands that have either a 5/8" Baby pin or 1-1/8" Junior receiver.

$1150.00

Availability: Usually ships the next business day. S-2320 is a studio LED spot light, with Chip-on-board LEDs of 50,000 hours lifetime, and generates 160W light output, which is an ideal light source for broadcast studio and field video productions. Spot /Flood Adjust S-2320 outputs 20° - 70° beam angle by adjusting position of the LED board, and 0-100% non-flickering dimmable. The following output illuminace at different distance is for reference: Distance 20°Spot 70°Flood 3 meters 1800Lux 546Lux 5 meters 666Lux 196Lux 7 meters 320Lux 100Lux Bi-color temperature S-2320 LED board alternated with 3000K and 8000K LEDs, and the output color temperature can be continuously adjustable between 3000K and 8000K. High Color Reveal Ability CRI (Color Rendering Index) is a measure of the ability of a light source to reveal the colors of various objects faithfully in comparison with a natural light source. And TLCI (Television Lighting Consistency Index) is special for the color reveal ability by camera sensor. Max value 100. The normal LED light has 80-85 CRI or TLCI, while S-2320 offers the super high CRI at 95 and TLCI at 95, and will not lost the object original colors. DMX512 Control S-2320 adopts standard 5-pin DMX in/out port, supports DMX512 protocol, and adjusts dimmer and color temperature by DMX controller. The dimmer and color temperature occupy 1 DMX address respectively. The DMX address is set by 10x binary DIP switchers, and displayed by LED. LCD screen display The rear LCD screen can display the current dimmer percentage, color temperature value, and supports touch control to adjust. Silent Mode S-2320 adopts silent fans to radiate heat, which will not affect normal shooting environment to record audio. While in strictly silent required broadcast environment, S-2320 can be switched to “Silent Mode” to turn off the fans. And meanwhile, the max brightness will be reduced to 50%. Sleep Mode S-2320 supports “Sleep Mode”: you can switch off the light by pressing the DIMMER knob, to enter Sleep Mode. And press the DIMMER knob again; the S-2320 can be quickly light up to the previous dimmer value. 4-leaf Metal Barn Door S-2320 is equipped with 4-leaf metal barn doors, dismountable and rotatable. Meanwhile, the light provides a special black-out cloth to prevent the light leakage. Mounting Options The yoke mounting options for light stands that have either a 5/8" Baby pin or 1-1/8" Junior receiver.

$18.00

Availability: Usually ships the next business day D-tap 90° conversion D-tap male to female connection For S-8U63/8U93 on Sony PXW-FS7 D-tap 90° conversion S-7105 is a D-tap male to female connector of 90° conversion. Sony PXW-FS7 Application On Sony new camera PXW-FS7, the D-tap output socket of SWIT compatible battery S-8U63 or S-8U93 is blocked by the camera structure. So you can use S-7105 connector to extend the battery D-tap socket by 90° angle, and connect with other on-camera devices to power. Specifications Power connector (A) D-tap male Power connector (B) D-tap female Warranty Period: One year conditional.

$16.00

Availability: Usually ships the next business day S-7108 is a DC cable with 5.5mm pole connector on both ends. Its widely used in broadcast equipments, such as SWIT DV batteries with pole DC output socket (S-8972/8D62/8BG6/8845), S-3602 adapting output socket, S-2040 DC input socket, S-1051 monitor DC input, etc. The cable length is 1 meter. Key Features: 5.5mm pole to pole DC cable 1 meter cable length Warranty Period: One year conditional.

$26.00

Availability: Usually ships the next business day S-7104 has a D-tap plug to connect with battery plate or battery with D-tap output socket and get DC power. Key Features: 1 Connect with D-tap output power source Output DC via 5.5/2.1mm pole-tap connector 2-pin Pole-tap DC Connector S-7104 outputs DC power via 5.5/2.1mm 2-pin pole-tap connector, with 0.6 meter cable length for connecting with the devices, such as SWIT S-2040 / S-2050 on-camera LED lightings, and S-1051H / S-1051C LCD monitors.

$29.00

Availability: Usually ships the next business day The S-7102 is an adaptor cable for S-3802A/S charger, provides 14.4V DC output through a 4-pin XLR connector. Key Features: 14.4V DC output 4-pin XLR connector S-3802A/S output cable Specifications: Output voltage DC 14.4V Cable length Approx 10ft/3m Warranty Period: One year conditional.

$29.00

Availability: Usually ships the next business day The S-7101 connects to D-tap socket of batteries or mount plates and provides 14.4V DC output through a 4-pin XLR connector. (Battery plate sold separately.) Key Features: 14.4V DC output 4-pin XLR connector D-tap socket applicable Specifications: Output voltage DC 14.4V Cable length Approx 6.6ft/2m Warranty Period: One year conditional.

$29.00

Availability: Usually ships the next business day The S-7100S directly connects to pins of V-mount batteries and provides 14.4V DC output through a 4-pin XLR connector. (Battery sold separately.) Key Features: 14.4V DC output 4-pin XLR connector V-mount battery applicable Specifications: Output voltage DC 14.4V Applicable battery V-mount battery Cable length Approx 6.6ft/ 2m Warranty Period: One year conditional.

$29.00

Availability: Usually ships the next business day The S-7100A directly connects to pins of gold mount batteries and provides 14.4V DC output through a 4-pin XLR connector. (Battery sold separately.) Key Features: 14.4V DC output 4-pin XLR connector Gold Mount battery applicable Specifications: Output voltage DC 14.4V Applicable battery Gold Mount battery Cable length Approx 6.6 ft/ 2m Warranty Period: One year conditional.

$29.00

Availability: Usually ships the next business day Sony NP-F type dummy battery Pole-tap DC connector Power Sony DV cameras by AC-DC adaptor Sony NP-F Type Battery Compatible S-7500F is the Sony NP-F type dummy battery adaptor. Mount the dummy battery head onto Sony DV camera, and connect with pole-tap DC power source, you can prolong the camera running time or get uninterrupted power source from AC-DC adaptor. Pole-tap DC connector S-7500F can be connected with power source by 5.5/2.1mm pole-tap connector, compatible with SWIT DV batteries with Pole-tap socket; SWIT S-3602F/M/P/B/J/V/i/C DV battery charger/adaptor, and SWIT S-4310 power distributor for shoulder rigs. Specifications: Compatible battery SWIT S-8972, S-8970, S-8770 Sony NP-F970, NP-F770 Applicable camera Sony HVR-Z1/Z5/Z7/V1 Sony DSR-PD150/170/190 Sony NEX-FS100/700/EA50 Sony NXR-MC2000/HD1000 Output voltage Nominate DC 7.2V Cable length 1 meter Weight 0.1kg Warranty Period: One year conditional.

$29.00

Availability: Usually ships the next business day JVC SSL type dummy battery Pole-tap DC connector Power JVC HM600/650 cameras by AC-DC adaptor JVC SSL Type Battery Compatible S-7500i is the SSL-JVC50 type dummy battery adaptor. Mount the dummy battery head onto JVC GY-HM600/650 camera, and connect with pole-tap DC power source, you can prolong the camera running time or get uninterrupted power source from AC-DC adaptor. Pole-tap DC connector S-7500i can be connected with power source by 5.5/2.1mm pole-tap connector, compatible with SWIT DV batteries with Pole-tap socket; SWIT S-3602F/M/P/B/J/V/i/C DV battery charger/adaptor, and SWIT S-4310 power distributor for shoulder rigs. Specifications: Comparable battery SWIT S-8i50 SSL-JVC50 Applicable camera JVC GY-HM600/650 Output voltage Nominate DC 7.2V Cable length 1 meter Weight 0.1kg Warranty Period: One year conditional.

$29.00

Availability: Usually ships the next business day Canon DSLR LP-E6 type dummy battery Pole-tap DC connector Power Canon DSLR by AC-DC adaptor Canon DSLR Battery Compatible S-7500E is the Canon DSLR battery LP-E6 type dummy battery adaptor. Insert the dummy battery head into Canon DSLR 5D2/5D3/6D/7D, and connect with pole-tap DC power source, you can prolong the camera running time or get uninterrupted power source from AC-DC adaptor. Pole-tap DC connector S-7500E can be connected with power source by 5.5/2.1mm pole-tap connector, compatible with SWIT DV batteries with Pole-tap socket; SWIT S-3602F/M/P/B/J/V/i/C DV battery charger/adaptor, and SWIT S-4310 power distributor for shoulder rigs. Specifications: Compatible battery SWIT S-8PE6 Canon LP-E6 Applicable camera Canon EOS 5D2, 5D3, 6D, 7D, etc Output voltage Nominate DC 7.2V Cable length 1 meter Weight 0.1kg Warranty Period: one year conditional.

$29.00

Availability: Usually ships the next business day S-7004 series battery mounts are specifically designed for SWIT portable monitors models S-1071C / S-1071C+/S-1071F / S-1071H (which has a HDMI loop through output), S-1093H / S-1093F. S-7004 battery mount can also be used for Swit S-2041 & S-2070 on camera LED light. Note: If your monitor is a S-1071C/F/H model, but does not have a HDMI loop through output, please choose corresponding S-7001 series battery mount. Battery mount options: Model Number Original Battery SWIT Battery S-7004B Panasonic VW-VBG6 S-8BG6 S-7004C Canon BP-945/970G S-8845, S-8945 S-7004D Panasonic VW-VBD & CGR-D S-8D58 S-7004E Canon LP-E6 S-8PE6 S-7004F Sony L series S-8972, S-8970 S-7004I JVC SSL-JVC50 S-8i50 S-7004U Sony BP-U series S-8U93, S-8U63 Warranty Period: One year conditional.

$129.00

Availability: Usually ships the next business day S-7005A Using Gold mount Battery on V-mount Camera New gold mount release button Metal V wedge D-tap DC output socket Smaller in size Stable and reliable connectivity Adapt the Gold-mount battery to the V-mount camera S-7005A is used to adapt Gold mount batteries to Sony V-mount cameras. The front side is a Gold mount plate to attach Antonbauer gold mount batteries, and the rear side is a V-mount connection for the Sony V-mount cameras. D-tap Output Socket The S-7005A adaptor is equipped with a D-tap DC output socket on the side, for simultaneous DC power output to additional on-camera equipment. Nominate voltage is 14.4V Durable Release Button S-7005A is equipped with a new battery release button, with an outstanding feeling and resilience, and ensures the stable and reliable connectivity of the battery. Specifications: Nominate Voltage 14.4V Applicable battery Gold-mount battery Applicable camera V-mount cameras Dimension 119×85×24mm Weight 120g Warranty Period: one year conditional.

$65.00

Availability: Usually ships the next business day S-7000A is a gold mount plate with a 14.4V D-tap output socket. The back metal plate has thread holes for camera assembly. Key Features: Gold mount battery applicable D-tap output Specifications: Output voltage 14.4V Applicable battery Gold mount battery Net weight Approx 0.26kg Dimension 132x105x15mm Warranty period: One year conditional.

$105.00

Availability: Usually ships the next business day S-7010S is the standard V-mount battery plate for customers to adapt V-mount power solutions. Key Features: To adapt V-mount power solutions Build-in D-tap DC output socket Build-in 7.2V pole-tap DC output socket Build-in 5V/1A USB output socket Robust thickened power pins Multiple DC Output Sockets S-7010S provides: 1x D-tap output (Max load 10A) 1x 7.2V/3A Pole-tap DC output(5.5/2.1mm) 1x5V/1A USB output The 7.2V pole-tap and USB output can be switched on/off manually, to save energy when there're no connections. Robust Thickened Power Pins As the updated version of S-7000S plate, S-7010S adopts new robust thickened power pins, fully contact with batteries, and reduce the contact resistance from 2.4mΩ to 0.8mΩ, to ensure safety when high current pass through from battery, especially the Cine-camera power application. Adapt and Installation You can install the S-7010S onto your broadcast equipment by 4 screw positions, which are compatible with the previous S-7000S. DC cables are opened to customer connection, by disassemble the rear plate first. Warranty Period: one year conditional.

$129.00

Availability: Usually ships the next business day Gold mount camera to use V-mount battery New V-mount release button D-tap DC output socket Smaller in size Stable and reliable connectivity Adapt V-mount battery to Gold mount camera S-7005S is used to adapt V-mount batteries to Panasonic AntonBauer gold mount cameras. The front side is V-mount plate, to attach SONY V-mount batteries, and the rear side is AntonBauer gold mount connection for the Panasonic gold mount cameras. D-tap Output Socket The S-7005S adaptor is equipped with a D-tap DC output socket on the side, for simultaneous DC power output to additional on-camera equipment. Nominate voltage is 14.4V Durable Release Button S-7005S is equipped with a new battery release button, with outstanding feeling and resilience, and ensures the stable and reliable connectivity of battery. Specification: Nominate Voltage 14.4V Applicable battery V-mount batteries Applicable camera Gold mount cameras Dimension 119×99×35mm Weight 150g Warranty Period: one year conditional.

$65.00

Availability: Usually ships the next business day S-7000S is a V-mount plate with a 14.4V D-tap output socket. The back metal plate has thread holes for camera assembly. Key Features: V-mount battery applicable D-tap output Specifications: Output voltage 14.4V Applicable battery V mount battery Net weight Approx 0.28kg Dimension 136x97x20mm Warranty Period: One year conditional.

$1200.00

Availability: Usually ships in 1-2 weeks E-5010 is a Camera Remote Control Unit that universal compatible with SONY and Panasonic cameras, supports IRIS, GAIN, Master Black Level, B&W Balance, etc controlling. Key Features: Universal Compatible with SONY and Panasonic cameras Directly connect with camera or work in SWIT EFP Fiber camera system Lever controlled IRIS with value display LCD display operation data Independent M.PED control knob Shutter speed, B&W balance, DTL control Video recording and Timecode display Thinner size design Specifications: Working Voltage DC 9V~16V Power consumption 2.5W Input/Output CAM/BS Round 10 pin Max. Cable length 50 meters Working temperature 0°C ~ 40°C Storage temperature -20°C ~ 60°C Working Humidity 10% ~ 80% Dimensions 64mm * 36mm * 245mm Net weight Approx. 450g Connection (Directly to camera or connected in SWIT EFP system) E-5010 Remote Control Unit provide a 10-pin connection port, which can directly connected to camera REMOTE port via particular cables, or connected to CCU of SWIT EFP Fiber Camera System to control the cameras. The RCU cables are customized according to the connector type and length. (Max cable length: 50 meters) IRIS Control The IRIS is controlled by lever, and an independent Numeric Display can indicate IRIS value. LCD Display The E-5010 RCU provides a LCD screen to display the settings and parameters that read from camera. The definitions of hot buttons are displayed on LCD. Warranty Period: Two years conditional.

$1950.00

Availability: Usually ships in 1-2 weeks S-9204 is a solution of monitoring 4-ch SDI by a single HDMI television or monitor. There're 3 display patterns: Quad split display, one channel full screen switch display, and PGM/PVW mode display. Each input SDI has independent loop through output and support SDI timecode, embedded audio meter, video title editing on each displaying window. Besides multiviewing, the S-9204 can also be used as a basic switcher in the PGM/PVW display mode. It support PGM output via SDI and one key direct switching from PVW to PGM, with absolute zero delay. The S-9204 is 19-inch 1RU standard size, and pure keyboard operation, work independently without computers. Key Features: 4-ch HD/SD-SDI input 4-ch HD/SD-SDI loop output Multiview output via HDMI Quad-split, Full screen, and PGM/PVW display modes PGM switcher output via SDI, with zero delay SDI embedded audio output via 3.5mm socket SDI embedded audio meter display (2-ch) SDI time code display Customer editable video title for each input channel 4:3 scale marker on 16:9 HD input 19-inch 1U rack mount 4-SDI Switcher via SDI Now you can use S-9204 as a basic SDI switcher in the field producing. It support PGM channel output via SDI, direct switching by pressing the channel buttons on the front panel, and supports PVW to PGM switching under the PGM/PVW display mode. The PGM switching output offers zero delay. Input and Output S-9204 Quad Viewer support: HD/SD-SDI input x4 HD/SD-SDI loop output x4 HDMI Quad-split output x1 SDI switching output x1 3.5mm analog audio output x1 Note: The input SDI signals require the same format. Embedded Audio Monitoring By audio meters or headphone output The HDMI multiview output supports 2 channels of SDI embedded audio meters display for each input channel. The audio meter is green, and will turn yellow when exceeds -20dB, and turn red when exceeds -9dB. And you can select the input channel to output SDI embedded audio via 3.5mm headphone socket. SDI Timecode, Channel Title The SDI timecodes of each input channel can be displayed under HDMI multiview output. And you can also edit the channel title for each input video easily by pressing the keys on the front panel of S-9204. Power Supply The S-9204 can be powered via the 4-pin XLR socket of DC 12V input on the rear panel. A 4-pin XLR power adaptor is provided in the product package. Warranty Period: Two years conditional.

$1800.00

Availability: Usually ships in 4-6 weeks Power station of SWIT Fiber Camera System: E-2010P is the Power Station of SWIT Fiber Camera System, provides power to CCU E-1040P and all camera adaptors E-4020 in the system via CCU.

$3000.00

Availability: Usually ships in 4-6 weeks SWIT Fiber Camera System includes the Camera optical fiber adaptors and CCU as the main essential devices. E-4020 is the camera adaptor to communicate with CCU via Lemo or Neutrik cables, transmit camera SDI, switcher return SDI, intercom, TALLY, camera remote etc. E-4020A is Gold mount connection and E-4020S is V-mount connection.

$21600.00

Availability: Usually ships in 4-6 weeks Center Communication Unit (CCU): E-1040P is the CCU, includes 4 camera channels input via Lemo or Neutrik cables, and with build-in intercom control panel.

$35400.00

Availability: Usually ships in 4-6 weeks 4-ch System Package Includes: 1x 4-ch CCU (E-1040P) 1x Power Supply Unit (E-2010P) 4x Camera Adaptors (E-4020A/S) 4x Headsets for cameramen 1x Headset and 1x Mic for director Essential cables Note: Lemo or Neutrik cables are not included in the package. 4-ch System Package: This package can help you build a 4-ch Fiber Camera System easily. You just need to prepare cameras, switcher and Lemo or Neutrik cables out of this package, and the system can solve: 4 channels camera optical fiber connection; Return SDI Pic-in-Pic display and control on camera ends; Full duplex intercom between cameras and CCU; TALLY signal to cameras; Power distribution to cameras; The CCU E-1040P: The CCU, center communication unit of this 4-ch system, supports 4 camera channels input via Lemo or Neutrik cables , and with build-in intercom control panel. You can select Lemo or Neutrik connectors for this CCU, and the Neutrik connector can be connected by LC pure optical fibers. The E-1040P CCU supports cascading for more channels. The Camera Adaptor E-4020A/S: The 4-ch package provides 4x Camera Optical Fiber Adaptors, to be attached with ENG cameras and communicate with CCU in the system. The camera adaptor offers Lemo or Neutrik connectors for selection, and you can also select the battery plates from V-mount or Gold mount, to adapt your cameras. The Power Supply Unit E-2010P: The package provides a power supply unit E-2010P, to supply power to CCU and distribute to 4 cameras via Lemo or Neutrik cables. Click HERE for more detail information for the Power Supply Unit. Warranty Period: two years conditional.

$3299.00

Availability: Usually ships in 3-4 weeks. MVIO delay -HD20s provides effective video/audio delay for HD or SD signal in a 1U half chassis. It is suitable for short-time delay or audio/video and simple operation. MVIO delay -HD20s supports self-adaptive HD/SD input signal. The delay time is up to 20 seconds and minimum is frame. It has built-in frame synchronization, supporting H-phase adjustment. It supports lip sync adjust, the adjustment range is ±15 frames. The front is configured with Delay/bypass/mute three buttons. Through the wheel, user can easy see and adjust working parameters. With build-in webserver, user also can remote control and adjust via web page. View Product Video

$619.00

Availability: Usually ships the next business day. MIO SDI-AViewer is a mini HD(3G)/SD-SDI to HDMI/DVI video scaling converter with a real time video/audio quality assurance watch dog The MIO HDSDI-HDMI/DVI provides automatic video input format detection, and supports variety of video resolutions, including 525i60, 625i50, 720p, 1080i, and 1080p. The watch dog provides a real time video/audio survey and alarm. The MIO-HDSDI-HDMI/DVI also provides an overlay for marker, waveform analyzer, AFD, dynamic UMD, Tally and a 4 channel audio VU meter. It has an optional stereo audio output. The built-in web server allows the user to easily remote control the unit by a WEB browser. And it fully supports the SNMP protocols for remote monitoring. The MIO SDI-Aviewer is the cost-effective solution for constructing video/audio monitoring and display system. It is perfect for many broadcasting and professional A/V monitoring applications, such as control room, mobile truck, production, post-production, and playout.

$139.00

Availability: Usually ships the next business day The MMIO ADA is a miniature high performance analog audio distribution amplifier for the broadcast and Pro A/V industry. Exceptional performance features include excellent response, noise and distortion specifications. MMIO ADA functions with 4 balanced outputs. Additionally, MIO ADA can be used to distribute LTC. One analog audio input Four distribution outputs Power supply indicator Input signal indicator Mini MIO box structure measuring 3.8 x 2.5 x 1.1" Power socket with fixing lock

$139.00

Availability: Usually ships the next business day. The MMIO VDA is a miniature 1 to 4 general purpose analog video / sync. distribution amplifier which is suitable for any analog SD/HD TV video signal or SDTV Bi-level sync pulses, black reference, or HDTV Tri-level sync pulses.

$199.00

Availability: Usually ships the next business day. The MMIO VSD-HD is a 1x4 3G/HD/SD-SDI Video Distribution Amplifier. The MIO VSD_HD is a high performance distribution amplifier for SDI (SMPTE 259M and SMPTE 344M) and HD-SDI (SMPTE 292M & SMPTE 425) signals. It takes one input, provides reclocking and equalization and distributes the signal to four identical outputs. Resolution - 8 & 10-bit (automatic). Reclocking & Equalization - Automatic. Data Rates - 143, 177, 270, 360, 540, 1483.5, 1485, 2970Mbps. Compact Size - Part of the MIO family of compact, high quality and cost effective solutions. One HD / SD-SDI signal input and four HD / SD-SDI signal outputs with re-clocking Supports automatic input detection of 525i 60, 625i 50, 720p, 1080i, and 1080p formats Supports HD / SD-SDI signals with embedded audio Adopts reclocking of video signals to provide an additional level of signal integrity in long cable length applications Provides signal equalization to improve the signal quality and reduces signal loss caused by long-distance transmission of input source LED lights on the mini box indicate the status of input signal and power supply Mini box structure enables easy installation inside frame racks, video walls, and other structures and devices Widely used in broadcasting systems, studios, and other professional fields CE certification

$289.00

Availability: Usually ships the next business day The MIO DEC-AUD is a small, high-quality analog video to SDI video converter. The MIO DEC-AUD converts one channel of analog video (CVBS/YUV/YC) to two identical SDI video channels while embedding one analog stereo audio signal into each serial digital signal. The format of the input signal can be NTSC or PAL. The output supports SDI video in both the 525i 60 and 625i 50 formats. Known for its compact functioning, the converter is widely-used in TV program post production, studios, broadcasting, etc.

$289.00

Availability: Usually ships the next business day. The MIO DA-AUD is a small audio D/A, featuring high quality AES to analog audio conversion. It converts two groups of digital audio to four channels of balanced analo audio with 24 bit processing. Output audio channel selected by DIP switch This compact box requires a 12V DC power from an optional AC to DC power supply or 12V external source, such as a camera or battery. For user confidence and convenience there are two LEDs that indicate the status of source signal and power. Supports 2 AES audio signal input and 2 analog audio stereo signals output Convert 2 group digital audio to 4 channel balanced analog audio effectively Adopt BNC interface (unbalanced mode) for input and 3-pin interface (balanced mode) for outputs Combine 2 channels of AES flexibly to form the left and right channel of analog audio via DIP switcher Provide a variety of full scale standards (+18dBu / +20dBu / +22dBu / +24dBu) LED light on the Mini box indicates the status of source signal and power supply (Indicated by shining or extinguishing of the red and green LEDs) Mini box structure can be easily installed inside the frame racks, video walls, and more Adopts 24-bit processing

$289.00

Availability: Usually ships the next business day. The MIO-AD-AUD is a miniature Analog to AES digital audio converter. The MIO-AD-AUD Converts four channels of balanced analog audio to two groups of AES/EBU digital audio with broadcast quality 24 bit processing. Output audio group selected by DIP switch. The MIO AD-AUD requires a 12V DC power from an optional AC to DC power supply or 12V external source, such as a camera or battery. For user confidence and convenience there are two LEDs that indicate the status of source signal and power. Supports 2 analog audio stereo signals input and 2 AES audio signals output Effectively converts 4-channel balanced analog audio to 2 group digital audio Adopts the BNC interface (unbalanced mode) for outputs and 3-pin interface (balanced mode) for inputs Flexibly combines the left and right channel via a DIP switcher to form 1 AES signal 2 channels of AES flexibly to form Provides a variety of full scale standards (+18dBu / +20dBu / +22dBu / +24dBu) LED lights on the Mini box indicates the status of source signal and power supply (Denoted by the shining or extinguishing red and green LEDs) Mini box structure can be easily installed inside the frame racks, video walls, and more Adopts 3-pin for audio interface Broadcast quality with 24-bit processing and 48 kHz audio sampling Based on the Mini BOX platform Widely used in broadcasting systems, fields of studio, and other professional fields

$419.00

Availability: Usually ships the next business day. MMIO EMB-HDSDI can embed two channels analog audio signal into a single serial digital signal, and output one embedded SDI. It supports SD-SDI, 1.5 Gbps HD-SDI and 3.0 Gbps HD-SDI for inputs and outputs. It can also be applied to digital signal with embedded audio for input signal. MMIO EMB-HDSDI supplies real-time input signal status indicator and power indicator which make it convenient to monitor. The embedded audio channel can be selected though DIP Switch.

$1699.00

Availability: Usually ships in next business days. The MIO MVS-4HDMI is a low-cost miniature quad HDMI/DVI input multi-viewer system. The MIO MVS-4HDMI supports 4ch. HDMI/DVI inputs and a DVI/HDMI (up to 1920x1080) output. It is a true multi-view display system with rich features, such as configurable display layout, display template restore & recall, real time audio & video survey and on screen alarm, AFD, clock and logo display, dynamic UMD, audio UV meter, etc. The compact and maintenance-free MIO MVS is perfect for mission critical and live applications. With a built-in WEB server, users can easily remote control the unit with a WEB browser. No special software is needed. The MIO-MVS-4HDMI is the most cost-effective solution for many broadcasting and professional A/V applications, such as control room, production, mobile truck, post-production, and play-out system.

$100.00

Availability: Usually ships in 1-2 weeks The S-1073F adopts a 7-inch LCD panel with LED backlight, optical bonding technical. The native resolution is Full HD 1920×1200, contrast 1000:1, and viewing angle is Horizontal: 160° / Vertical: 160°

$65.00

Availability: Usually ships the next business day S-7200C is a DV battery adaptor for SWIT S-8945 and compatible with Canon BP-930/945 DV batteries. It has a 7.2V pole DC output for S-2010 LED light, and a clamp to fit camera arm or tripod. Key Features: 7.2V pole output SWIT S-8945 battery applicable Canon BP-930/945 DV battery applicable

$465.00

Square shape design for Cine-cameras PB-S series camera batteries are compact designed, shorter than normal V-mount batteries, and match perfectly with most of the Cine-cameras. 220Wh / 15.3Ah Capacity Consists of 24pcs of high class 18650 battery cells, nominal voltage is 14.4V and reaches 220Wh / 15.3Ah high capacity. Can run approx 7 hours for normal ENG cameras and approx 2.5 hours for ARRI ALEXA. High Load for Cine Cameras 200W / 16A constant output PB-S220S provides at least 200W/16A high load even at 1% capacity, to drive high power Cine cam- eras and on-camera devices together. The high load cells will also ensure battery life comparing to normal load batteries if long time full load output. Multiple output sockets design 4× D-tap output sockets, 1× USB 5V/2A power output socket PB-S220S is equipped with 4 D-tap DC output sockets, Max total load is 120W/10A, which can power other on-camera equipments together. PB-S220S is equipped with 1x USB 5V/2A output, which can be used to charge mobile phones, tablets and other portable devices. 6A Fast Charging Using SWIT S-3812S fast charger PB-S220S supports 6A fast charging by SWIT S-3812 fast charger, saving more than 50% charging time. The 220Wh PB-S220S battery can be charged from 0 to 80% after 2.3 hours, and fully charged within 3.5 hours. Digital Power Info LCD display accurate remaining run time The build-in LCD can displays remaining power percentage, remaining working time, low power warning, and battery cycle times, and support viewfinder info display on both SONY and RED cameras. LCD alarm code description ① P01～P13: The battery trigger protection function and it can be recovered; ② When the battery rests over 10 days or runs out of power,it will enter sleep mode and the LCD will not display. ③ E01～E03: Not recoverable error, please contact manufacturers to repair, do not disassemble the battery. Common battery protection code: P01 Run out of power, please charge the battery asap. P02 Over-voltage when charging, please remove the battery, discharge the battery to decrease the battery voltage to restore. P03 Over-current when charging, please remove the battery, and it will restore after 30 seconds’ standing. P05～P07 The load is too heavy, please remove the battery, and it will restore after 30 seconds’ standing. P08～P09 Battery short circuit, please make sure that there is no foreign body between the electrodes or remove the battery, and it will restore after 30 seconds’ standing. P10～P13 Temperature protection, please remove the battery and place at room temperature to recover

$465.00

Square shape design for Cine-cameras PB-S series camera batteries are compact designed, shorter than normal Gold-mount batteries, and match perfectly with most of the Cine-cameras. 220Wh / 15.3Ah Capacity Consists of 24pcs of high class 18650 battery cells, nominal voltage is 14.4V and reaches 220Wh / 15.3Ah high capacity. Can run approx 7 hours for normal ENG cameras and approx 2.5 hours for ARRI ALEXA. High Load for Cine Cameras Max 200W / 16A constant output PB-S220A provides 200W/16A high load even at 1% capacity, to drive high power Cine cameras and on-camera devices together. The high load cells will also ensure battery life comparing to normal load batteries if long time full load output. Multiple output sockets design 4× D-tap output sockets, 1× USB 5V/2A power output socket PB-S220A is equipped with 4 D-tap DC output sockets, Max total load is 120W/10A, which can power other on-camera equipments together. PB-S220A is equipped with 1x USB 5V/2A output, which can be used to charge mobile phones, tablets and other portable devices. 6A Fast Charging Using SWIT S-3812A fast charger PB-S220A supports 6A fast charging by SWIT S-3812 fast charger, saving more than 50% charging time. The 220Wh PB-S220A battery can be charged from 0 to 80% after 2.3 hours, and fully charged within 3.5 hours. Digital Power Info LCD display accurate remaining run time The build-in LCD can displays remaining power percentage, remaining working time, low power warning, and battery cycle times, and support viewfinder info display on both SONY and RED cameras.

$195.00

Square shape design for Cine-cameras PB-S series camera batteries are compact designed, shorter than normal V-mount batteries, and match perfectly with most of the Cine-cameras. 98Wh Capacity, 150W/12A load Consists of 12pcs of high class 18650 battery cells, nominal voltage is 14.4V and reaches 98Wh / 6.8Ah high capacity. Can run approx 3 hours for normal ENG cameras. Provides at least 150W / 12A high load even at 1% capacity. Multiple output sockets design 2× D-tap output sockets, 1× USB 5V/2A power output socket PB-S98S is equipped with 2 D-tap DC output sockets, which can power other on-camera equipments together. The Max output current of D-tap is 10A, 120W PB-S98S is equipped with 1x USB 5V/2A output, which can be used to charge mobile phones, tablets and other portable devices. Digital Power Info LCD display accurate remaining run time The build-in LCD can displays remaining power percentage, remaining working time, low power warning, and battery cycle times, and support viewfinder info display on both SONY and RED cameras. LCD alarm code description ① P01～P13: The battery trigger protection function and it can be recovered; ② When the battery rests over 10 days or runs out of power,it will enter sleep mode and the LCD will not display. ③ E01～E03: Not recoverable error, please contact manufacturers to repair, do not disassemble the battery. Common battery protection code: P01 Run out of power, please charge the battery asap. P02 Over-voltage when charging, please remove the battery, discharge the battery to decrease the battery voltage to restore. P03 Over-current when charging, please remove the battery, and it will restore after 30 seconds’ standing. P05～P07 The load is too heavy, please remove the battery, and it will restore after 30 seconds’ standing. P08～P09 Battery short circuit, please make sure that there is no foreign body between the electrodes or remove the battery, and it will restore after 30 seconds’ standing. P10～P13 Temperature protection, please remove the battery and place at room temperature to recover

$195.00

Square shape design for Cine-cameras PB-S series camera batteries are compact designed, shorter than normal Gold-mount batteries, and match perfectly with most of the Cine-cameras. 98Wh Capacity, 150W/12A load Consists of 12pcs of high class 18650 battery cells, nominal voltage is 14.4V and reaches 98Wh / 6.8Ah high capacity. Can run approx 3 hours for normal ENG cameras. Provides at least 150W/12A high load even at 1% capacity. Multiple output sockets design 2× D-tap output sockets, 1× USB 5V/2A power output socket PB-S98A is equipped with 2 D-tap DC output sockets, which can power other on-camera equipments together. The Max output current of D-tap is 10A/120W. PB-S98A is equipped with 1x USB 5V/2A output, which can be used to charge mobile phones, tablets and other portable devices. Digital Power Info LCD display accurate remaining run time The build-in LCD can displays remaining power percentage, remaining working time, low power warning, and battery cycle times, and support viewfinder info display on both SONY and RED cameras. LCD alarm code description ① P01～P13: The battery trigger protection function and it can be recovered; ② When the battery rests over 10 days or runs out of power,it will enter sleep mode and the LCD will not display. ③ E01～E03: Not recoverable error, please contact manufacturers to repair, do not disassemble the battery. Common battery protection code: P01 Run out of power, please charge the battery asap. P02 Over-voltage when charging, please remove the battery, discharge the battery to decrease the battery voltage to restore. P03 Over-current when charging, please remove the battery, and it will restore after 30 seconds’ standing. P05～P07 The load is too heavy, please remove the battery, and it will restore after 30 seconds’ standing. P08～P09 Battery short circuit, please make sure that there is no foreign body between the electrodes or remove the battery, and it will restore after 30 seconds’ standing. P10～P13 Temperature protection, please remove the battery and place at room temperature to recover